2013 Scrapheap Adventure Ride - Back 'O' Bourke - March 29-30 - Page 11

OldDog · 02-12-2013, 11:58 PM

My my thats a pretty Tenere CR! All that shiney paint and alloy will get dirty pretty quick though never fear

Joe, I'm lovin the sound of what yer doing mate. I have a fair bit of excess components in the shed, if theres anything I can help you with to get old Frankenstein rolling just yell out!

It looks like I'm back to the XR600 again as the KTM has proved too difficult to get parts for at this late stage. It's fuure is unclear at this stage, possible a shed ornamant? Possibly i'll sell it and get comfy with my XR's. I now have enough parts to build three whole bikes so why not?

buckscreek · 02-13-2013, 12:28 AM

Hi Bill,

pity about the KTM, was looking forward to the smell of 2-stroke in the morning..... Thanks for the offer of bits, I'll have a spares donor home this weekend, so will know just what I need, but I don't think I'll need too much, apart from a posty bike rack, so if you or anyone else reading this has one, please let me know. I've managed to score a KLX650 at the right price so now have a complete traily front end with a sexy set of USD forks for the front end, won't know what to do about springs, etc until I get it fitted up, but it can't be too hard to get right, right?

Have bought a braided line and late model caliper with sintered sports compund pads from Gumtree so hopefully it will stop OK!

Regards,

Joe & Co.

ckjackson1 · 02-13-2013, 12:43 AM

Quote:

Originally Posted by OldDog

My my thats a pretty Tenere CR! All that shiney paint and alloy will get dirty pretty quick though never fear

Joe, I'm lovin the sound of what yer doing mate. I have a fair bit of excess components in the shed, if theres anything I can help you with to get old Frankenstein rolling just yell out!

It looks like I'm back to the XR600 again as the KTM has proved too difficult to get parts for at this late stage. It's fuure is unclear at this stage, possible a shed ornamant? Possibly i'll sell it and get comfy with my XR's. I now have enough parts to build three whole bikes so why not?

Yes my Mrs did ask on several occasions what i spend all the time in the shed doing......... Polishing my Knob she suggested...........

She was so relieved when she saw the shiny Tenere!!! With the condition it is now in most would wrap it up or put on display - not me!!! shes about to get Dirty

Pezz_gs · 02-13-2013, 04:51 PM

Quote:

Originally Posted by ckjackson1

Yes my Mrs did ask on several occasions what i spend all the time in the shed doing.........

She was so relieved when she saw the shiny Tenere!!! With the condition it is now in most would wrap it up or put on display - not me!!! shes about to get Dirty

So where are the pics of the Yamaha Ag Bike????

OldDog · 02-16-2013, 05:18 PM

Howdy chaps, Well I'm done. Team OldDog has it's entry ready and I must say what a sexy machine it is too.

I picked up an old Ballards 630 kitted bike on Saturday morning, the motor is blown (the old choke butterfly in the engine trick) however it's a good little donor bike for all those little bits and pieces i needed.
Couldn't get the 600 to fire despite having more spark than an electric chair and great compression, fuel etc. Thought it was wrong ignition timing but after a coupla hours of ginning around discovered it was the f%$#ing pick up inside the engine that was stuffed

Anyway, was able to rig up some fuel and get it running last night and give Pezz the customery "IT"S ALIIIIIIVE!" message.....hows yer ears Pezz?
Spent last night nailing it together, rebuilding the forks and swing arm pivots and just finished the electrics this morning. Havn't test rode it yet, but i suspect the carb will need some jetting to suit the exhaust. Oh and picked up a really cheap Acerbis tank from ebay, and bonus it doesn't leak!

So thats it, after much stuffing about, i'm now ready to go.

colm · 02-16-2013, 09:18 PM

Could have saved you a lot of heartache and sold you my 96 model TT600 Yamaha that I picked up yesterday.

OldDog · 02-17-2013, 12:18 AM

Quote:

Originally Posted by colm

Could have saved you a lot of heartache and sold you my 96 model TT600 Yamaha that I picked up yesterday.

Thanks Col! Honestly though I have that much XR stuff laying about the TT would've felt like an orphan

So whats the story with the TT, pick it up for under a grand?

colm · 02-17-2013, 11:19 AM

$999.90 on special. Had to pay a bit more to get the tyres, tanks etc.

buckscreek · 02-17-2013, 02:12 PM

its off to the machinst I go this morning for a replacement steering stem...... got a donor bike for a complete front end but as it's off a slightly different style of bike, it requires a bit of minor work to make it fit.

The rear end of my bike is now converted back from VW to BMW so I guess thats pretty good progress. I reckon I'll be able to ride this thing next weekend which is more lead time than I've ever had!

The XR looks great Bill, still gonna share tht trailer with Pezz?

Rockman · 02-17-2013, 02:13 PM

Mine's ready to go except for rego.

On the road under a grand.

Pezz_gs · 02-17-2013, 02:21 PM

Quote:

Originally Posted by OldDog

Howdy chaps, Well I'm done. Team OldDog has it's entry ready and I must say what a sexy machine it is too.

Gee William

Thats a pretty little Honda you have there!!!!

You certainly like a challenge dont you???

Well dont buddy, but I will miss the two stroke haze

One year we will have to take 2 strokes on mineral oil

Pezz_gs · 02-17-2013, 02:24 PM

Quote:

Originally Posted by buckscreek

The XR looks great Bill, still gonna share tht trailer with Pezz?

Oi!!!!!!!!!!!!!!!

I resemble that remark

OldDog · 02-17-2013, 07:33 PM

Quote:

Originally Posted by buckscreek

The XR looks great Bill, still gonna share tht trailer with Pezz?

You're right Pezz, that's probably the cheapest of cheap shots I've seen here since....well since tREV posted something.....

The gloves are off Joe!

While I have your attention everyone, are there ant Scrappers planning on being in the Mudgee area on the wednesday prior to Easter? I'm going to throw together a bit of a BBQ on the wednesday night and brekky on Thursday morning before kick off. Let me know if yer gonna be around this way and I'll PM you the address.

Cheers

colm · 02-18-2013, 12:21 AM

Why don't you put the address on here so I can invite everyone.

Col

ckjackson1 · 02-18-2013, 01:17 AM

Quote:

Originally Posted by OldDog

You're right Pezz, that's probably the cheapest of cheap shots I've seen here since....well since tREV posted something.....

The gloves are off Joe!

While I have your attention everyone, are there ant Scrappers planning on being in the Mudgee area on the wednesday prior to Easter? I'm going to throw together a bit of a BBQ on the wednesday night and brekky on Thursday morning before kick off. Let me know if yer gonna be around this way and I'll PM you the address.

Cheers

Love your work OldDOG - Jackson's are in X 3.

02-12-2013, 11:58 PM	#151
OldDog Smelly Adventurer type Joined: Feb 2005 Location: Mudgee, Australia Oddometer: 3,666	My my thats a pretty Tenere CR! All that shiney paint and alloy will get dirty pretty quick though never fear Joe, I'm lovin the sound of what yer doing mate. I have a fair bit of excess components in the shed, if theres anything I can help you with to get old Frankenstein rolling just yell out! It looks like I'm back to the XR600 again as the KTM has proved too difficult to get parts for at this late stage. It's fuure is unclear at this stage, possible a shed ornamant? Possibly i'll sell it and get comfy with my XR's. I now have enough parts to build three whole bikes so why not? __________________ "Never trust a man who, when left alone in a room with a tea cosey, doesn't try it on" Billy Connelly 1966 Norton Atlas "Ruby" Triumph Tiger 800XC Boxes of XR600's and a psychopathic Ducati

02-13-2013, 12:28 AM	#152
buckscreek REDUNDANT Joined: Apr 2007 Location: Vacy Oddometer: 530	Thanks Hi Bill, pity about the KTM, was looking forward to the smell of 2-stroke in the morning..... Thanks for the offer of bits, I'll have a spares donor home this weekend, so will know just what I need, but I don't think I'll need too much, apart from a posty bike rack, so if you or anyone else reading this has one, please let me know. I've managed to score a KLX650 at the right price so now have a complete traily front end with a sexy set of USD forks for the front end, won't know what to do about springs, etc until I get it fitted up, but it can't be too hard to get right, right? Have bought a braided line and late model caliper with sintered sports compund pads from Gumtree so hopefully it will stop OK! Regards, Joe & Co.

02-16-2013, 05:18 PM	#155
OldDog Smelly Adventurer type Joined: Feb 2005 Location: Mudgee, Australia Oddometer: 3,666	Bringing sexy back Howdy chaps, Well I'm done. Team OldDog has it's entry ready and I must say what a sexy machine it is too. I picked up an old Ballards 630 kitted bike on Saturday morning, the motor is blown (the old choke butterfly in the engine trick) however it's a good little donor bike for all those little bits and pieces i needed. Couldn't get the 600 to fire despite having more spark than an electric chair and great compression, fuel etc. Thought it was wrong ignition timing but after a coupla hours of ginning around discovered it was the f%$#ing pick up inside the engine that was stuffedAnyway, was able to rig up some fuel and get it running last night and give Pezz the customery "IT"S ALIIIIIIVE!" message.....hows yer ears Pezz? Spent last night nailing it together, rebuilding the forks and swing arm pivots and just finished the electrics this morning. Havn't test rode it yet, but i suspect the carb will need some jetting to suit the exhaust. Oh and picked up a really cheap Acerbis tank from ebay, and bonus it doesn't leak! So thats it, after much stuffing about, i'm now ready to go. __________________ "Never trust a man who, when left alone in a room with a tea cosey, doesn't try it on" Billy Connelly 1966 Norton Atlas "Ruby" Triumph Tiger 800XC Boxes of XR600's and a psychopathic Ducati

02-16-2013, 09:18 PM	#156
colm Adventurer Joined: Jun 2010 Location: Northwest NSW Australia Oddometer: 67	Bill Could have saved you a lot of heartache and sold you my 96 model TT600 Yamaha that I picked up yesterday.

02-17-2013, 02:12 PM	#159
buckscreek REDUNDANT Joined: Apr 2007 Location: Vacy Oddometer: 530	hi-ho, hi-ho....... its off to the machinst I go this morning for a replacement steering stem...... got a donor bike for a complete front end but as it's off a slightly different style of bike, it requires a bit of minor work to make it fit. The rear end of my bike is now converted back from VW to BMW so I guess thats pretty good progress. I reckon I'll be able to ride this thing next weekend which is more lead time than I've ever had! The XR looks great Bill, still gonna share tht trailer with Pezz?

02-17-2013, 11:19 AM	#158
colm Adventurer Joined: Jun 2010 Location: Northwest NSW Australia Oddometer: 67	$999.90 on special. Had to pay a bit more to get the tyres, tanks etc.

02-17-2013, 02:13 PM	#160
Rockman Gnarly Adventurer Joined: Jan 2007 Location: Inverell, NSW Australia Oddometer: 228	Ready to roll! Mine's ready to go except for rego. On the road under a grand.

02-18-2013, 12:21 AM	#164
colm Adventurer Joined: Jun 2010 Location: Northwest NSW Australia Oddometer: 67	Why don't you put the address on here so I can invite everyone. Col

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode