ADVrider

Go Back   ADVrider > Bikes > Orange Crush
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 02-15-2013, 10:07 AM   #1
adrenalin-junkie OP
Gnarly Adventurer
 
Joined: Feb 2004
Location: Greenville , South - Carolina ,USA
Oddometer: 475
help with wiring for new FACET 40171 fuel pump

Attach the proper female spade connector to the blue-black wire in the original wire harness (the one you cut earlier). Use high quality crimp connectors (this one comes with shrink tubing pre-installed) and a good crimping tool. I used a convenient engine case bolt for the ground lug but you could use the brown wire in the loom if you preferred

Alternate options for connection:
Wire Loom Black/Blue to Facet Red
Wire Loom Brown to Facet Black
You can splice the OEM pump's connector to the Facet wiring, or a better (more sanitary method) is to pop the spade connectors out of it, and either salvage those to crimp to the Facet wiring or crimp on new. The pins can be pushed out of the plug with a special tool that you buy or make. Click the next image for link to a site that will help you do this. Be sure to pack connector with high temperature dielectric grease (silicone grease) before connecting to the wire harness.


Click Image for Link






Tidy up your hoses and secure as needed with zip ties. The red arrow points to the OEM fuel line that carries pressurized fuel from the output of the pump to the carburetors. The green arrow points to the new 5'16" fuel line that carries non-pressurized fuel from the left tank shutoff to the inlet of the pump.



I have just finished the installation for my FACET 40171 fuel pump .

I switched the ignition on , and nothing happened .Now here is where it gets bit confusing .

I wired my RED wire from the FACET fuel pump to the blue/black loom of the bike , and BLACK wire from the FACET to the brown wire of the loom .

Above they mention , you can use a brown wire to an engine case bolt or something similar .
How did you guys do it ?
adrenalin-junkie is offline   Reply With Quote
Old 02-15-2013, 11:39 AM   #2
RedRupert
Brit in the Soviet Union
 
RedRupert's Avatar
 
Joined: Jun 2006
Location: Riga, Latvia / Bergerac, France / Colchester, UK
Oddometer: 578
You switched the ignition on, but did you flip the kill switch on as well?
__________________
KTM 970 Adventure (2004 with carbed 2008 SD 990)
Yamaha WR 450 F
Honda 650 Dominator (1988)
Kawasaki KLR 650 (1988)
Yamaha RD 350 LC (1984)
RedRupert is offline   Reply With Quote
Old 02-15-2013, 12:18 PM   #3
Dustodust
Studly Adventurer
 
Dustodust's Avatar
 
Joined: Oct 2009
Location: Hillsboro Oregon
Oddometer: 860
I grounded mine to an engine cover bolt
__________________
04 KTM 950 S
04 KTM 525 EXC street plated
Dustodust is offline   Reply With Quote
Old 02-15-2013, 12:36 PM   #4
adrenalin-junkie OP
Gnarly Adventurer
 
Joined: Feb 2004
Location: Greenville , South - Carolina ,USA
Oddometer: 475
Quote:
Originally Posted by RedRupert View Post
You switched the ignition on, but did you flip the kill switch on as well?


YIP , I checked it , because it is EASY to forget the Ssimple things .
adrenalin-junkie is offline   Reply With Quote
Old 02-15-2013, 02:50 PM   #5
KEELAYMONSTER
BRRAAAAPPP!!!
 
KEELAYMONSTER's Avatar
 
Joined: Feb 2012
Location: Pleasanton, CA
Oddometer: 150
Have you checked your fuses? If you had the key on while wiring it and touched the wires it could pop fuse. If the fuse is good i would check to see if you are getting power to the blue/black wire. If you are then maybe the pump is faulty one. Highly un likely though.
__________________
Kyle Montagne #141K
KEELAYMONSTER is offline   Reply With Quote
Old 02-15-2013, 06:51 PM   #6
adrenalin-junkie OP
Gnarly Adventurer
 
Joined: Feb 2004
Location: Greenville , South - Carolina ,USA
Oddometer: 475
Laugh

Quote:
Originally Posted by Dustodust View Post
I grounded mine to an engine cover bolt



I took your advice and grounded mine to a bolt on the bottom side of the casing .

VOILA , it cranked right up .
Thanks a mil bud , for your input .
adrenalin-junkie is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 02:54 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014