|
02-27-2013, 12:48 AM
|
#1 |
|
Life is a trip
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,101
|
Base plate for KTM 990 ITG foam air filter.
Aluminum base plate cut with laser for KTM 990 ITG Superflow foam air filter. Matches with ITG JC30/65 model.
    Cost will be: 30€ + 15€ shipment costs. It can take from 14 up to 18 days to reach buyers. DZUS half turn clips and sealing flanges for throttle bodies are included. The hole for the breather hose can be omitted if asked. Foam filters are not included.
__________________
There is always a reason!! gefr screwed with this post 05-08-2013 at 03:08 AM |
|
|
|
05-07-2013, 02:07 AM
|
#2 |
|
Gnarly Adventurer
Joined: Oct 2012
Location: Bottom left hand side of OZ
Oddometer: 237
|
Do they fit in the airbox? Or would I put the lid of the airbox back on?
|
|
|
|
|
05-07-2013, 02:11 AM
|
#3 |
|
Life is a trip
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,101
|
No they replace the whole airbox completely.
The base plate sits on the throttle bodies. On that the foam filter attaches.
Cheers.
__________________
There is always a reason!! |
|
|
|
|
05-07-2013, 11:26 AM
|
#4 |
|
Gnarly Infantry
Joined: Dec 2006
Location: Denmark - Jutland
Oddometer: 870
|
Could/would you make any for the RC8.
|
|
|
|
05-07-2013, 11:36 AM
|
#5 |
|
Life is a trip
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,101
|
Mmm interesting thought.
It will take a while though... let me put this in perspective...
__________________
There is always a reason!! |
|
|
|
 |
| Share |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
