|02-27-2013, 12:48 AM||#1|
Life is a trip
Joined: Nov 2005
Location: East Med, Greece
Base plate for KTM 990 ITG foam air filter.
Out of office between July 26th and August 2nd
Aluminum base plate cut with laser for KTM 990 ITG Superflow foam air filter. Matches with ITG JC30/65 and JC30/80 model.
Cost will be 45€, shipping is free.
It can take up to 22 days to reach buyers, though it usually reaches USA in 10 days.
Plates without the breather hole and/or without temp sensor are now available, you just need to ask them specifically.
I can also include blanking plates with another 5€.
DZUS half turn clips and sealing flanges for throttle bodies are included. Sealing flanges should be fitted under the base plate.
Foam filters are not included. You can find a local distributor here:
There is always a reason!!
Fuel filters Fuel pump
Aluminum base plate for ITG foam air filter
Clutch master cylinder resleeving
Out of office 25 till 4th August
gefr screwed with this post 07-06-2014 at 08:23 AM
|Thread Tools||Search this Thread|