AR-NWA ADV BS thread - Page 4094

mdawg12 · 03-03-2013, 09:06 AM

Quote:

Originally Posted by stuckin

Think we could get a big enough group together to get a couple bags of them? I have one fryer. if we can get a couple more maybe a big group buy on some crawfish?

I'm in. But I'm thinking along of the lines of a "Camp, Ride, Eat, Drink" event. Shores Lake?

stuckin · 03-03-2013, 10:13 AM

Dam that ride really sucked. Thank you guys for the ideas while on the side of the road. I am tired after kicking that thing so dam much. Got it home a block or two at a time.

It would run with the choke on for a block or two then stop. I would let it sit and kick kick kick and get it going again. Then the same thing.

Is it hard to take a carb apart to clean it if you have never done it before?

stuck

stuckin · 03-03-2013, 10:15 AM

Quote:

Originally Posted by mdawg12

I'm in. But I'm thinking along of the lines of a "Camp, Ride, Eat, Drink" event. Shores Lake?

You guys with the big BMW's will have to dump all the crawfish in your storage boxs to get them out there

k1w1t1m · 03-03-2013, 10:21 AM

Quote:

Originally Posted by stuckin

Dam that ride really sucked. Thank you guys for the ideas while on the side of the road. I am tired after kicking that thing so dam much. Got it home a block or two at a time.

It would run with the choke on for a block or two then stop. I would let it sit and kick kick kick and get it going again. Then the same thing.

Is it hard to take a carb apart to clean it if you have never done it before?

stuck

It's pretty easy. Have a clean space to work. Lay the parts out carefully. If you have a parts diagram it will be easier. Draw pictures/take photos so you can reassemble it. On screw jets count the turns to closed before disassembly.

stuckin · 03-03-2013, 10:29 AM

Quote:

Originally Posted by k1w1t1m

It's pretty easy. Have a clean space to work. Lay the parts out carefully. If you have a parts diagram it will be easier. Draw pictures/take photos so you can reassemble it. On screw jets count the turns to closed before disassembly.

I have The Service Manual for the bike. It has good pictures. Just never done it before. Got space to work on now that we cleaned the garage and moved things around some what.

Did a fast search on line for the problem and most people with the problems i am having say its the pilot jet.

stuckin · 03-03-2013, 10:44 AM

Bella vista sure is not the place to pull over and try and kick start ur bike. not a lot of room. Glade i only got a couple miles from the house.

Scribe · 03-03-2013, 11:17 AM

Quote:

Originally Posted by mdawg12

I'm in. But I'm thinking along of the lines of a "Camp, Ride, Eat, Drink" event. Shores Lake?

I could pick up the bugs and throw them in one of my side cases, but I'd have trouble strapping a big cook pot, propane tank and fryer on too.

stuckin · 03-03-2013, 11:19 AM

Quote:

Originally Posted by Scribe

I could pick up the bugs and throw them in one of my side cases, but I'd have trouble strapping a big cook pot, propane tank and fryer on too.

I could get my wife to bring everything out in the car. She would love to try them things

Albie · 03-03-2013, 11:32 AM

OK, so does anyone know who owns that little track across from Stonebridge Meadows golf club off of Deadhorse MTN RD? Saw a couple CBRs on it today when I rode by there a little while ago.

stuckin · 03-03-2013, 11:53 AM

ok got the seat,tank and carb almost all the way off. There is a screw on the throatal cable i cant get loose. tried and it slipped and not the screw is jacked up. any tricks to getting a screw out that is almost stripped?

Also those carbs have gas in them

The Toyman · 03-03-2013, 11:59 AM

Quote:

Originally Posted by Albie

OK, so does anyone know who owns that little track across from Stonebridge Meadows golf club off of Deadhorse MTN RD? Saw a couple CBRs on it today when I rode by there a little while ago.

CDS Farms, Mel Collier

a1fa · 03-03-2013, 11:59 AM

drill into it

Albie · 03-03-2013, 12:01 PM

Quote:

Originally Posted by The Toyman

CDS Farms, Mel Collier

So does he charge people to use it or does he just let people he knows ride there?

stuckin · 03-03-2013, 12:02 PM

Quote:

Originally Posted by a1fa

drill into it

then what? all this stuff is supper knew to me. sorry for all the dumb ?'s

katbeanz · 03-03-2013, 12:05 PM

Quote:

Originally Posted by stuckin

ok got the seat,tank and carb almost all the way off. There is a screw on the throatal cable i cant get loose. tried and it slipped and not the screw is jacked up. any tricks to getting a screw out that is almost stripped?

Also those carbs have gas in them

baby pair o vise grips More than likely the float bowl screws are JIS japanese industrial standard, phillips will work if you break it loose with the baby vise grips first.

03-03-2013, 11:32 AM	#61404
Albie Kool Aid poisoner Joined: Mar 2004 Location: NWA Oddometer: 4,829	OK, so does anyone know who owns that little track across from Stonebridge Meadows golf club off of Deadhorse MTN RD? Saw a couple CBRs on it today when I rode by there a little while ago. __________________ Good. Bad. I'm the guy with the gun. Guess what doofus, nobody reads your lame blog.

03-03-2013, 11:59 AM	#61407
a1fa Riding Nomad™ Joined: Nov 2006 Location: Arkansas Oddometer: 12,722	drill into it __________________ Learn to ride. Ride to learn. FS: 1993 Suzuki DR350S (wide ratio 6 speed - street legal kickstart)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-03-2013, 10:13 AM	#61397
stuckin Studly Adventurer Joined: Dec 2012 Location: Bella Vista, AR Oddometer: 734	Dam that ride really sucked. Thank you guys for the ideas while on the side of the road. I am tired after kicking that thing so dam much. Got it home a block or two at a time. It would run with the choke on for a block or two then stop. I would let it sit and kick kick kick and get it going again. Then the same thing. Is it hard to take a carb apart to clean it if you have never done it before? stuck

03-03-2013, 10:44 AM	#61401
stuckin Studly Adventurer Joined: Dec 2012 Location: Bella Vista, AR Oddometer: 734	Bella vista sure is not the place to pull over and try and kick start ur bike. not a lot of room. Glade i only got a couple miles from the house.

03-03-2013, 11:53 AM	#61405
stuckin Studly Adventurer Joined: Dec 2012 Location: Bella Vista, AR Oddometer: 734	ok got the seat,tank and carb almost all the way off. There is a screw on the throatal cable i cant get loose. tried and it slipped and not the screw is jacked up. any tricks to getting a screw out that is almost stripped? Also those carbs have gas in them