ADVrider

Go Back   ADVrider > Bikes > Thumpers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 03-04-2013, 05:30 PM   #1006
seasider
Just a rider
 
seasider's Avatar
 
Joined: Oct 2007
Location: Virginia
Oddometer: 321
Quote:
Originally Posted by KYLEISCOOL View Post
I was wondering if anyone has coughed up the dough for one of the baja designs squadron and put it on there pig? . I have a stock stator and am currently running the stock headlight with led blinkers and an led brake running light. And I dont plan on running any other extras in the future. Im really interested in the squadron cause my thing is that it supposedly only uses 44 watts and I wont have to get the upgraded stator. Just get a reg/rec from baja designs, which I have one laying around the garage somewhere. I called up BD and they said that the squadron wont run on the stock AC current and thats why I need the reg/rec to convert it to DC? Then by having a DC setup would I have to run a battery too? Thanks to anyone trying to help a retard when it comes to electricity.
I need some help here too.....just fried my Squadron!!!!
Bike came to me with a BD dual sport kit and I assumed it would be a plug and play but no such luck.
The good news is the light can be shipped back and repaired for $75 but noe I need to fix the issue and get D/C to the headlight.
How do I do this on my XR?????
I can follow directions and turn wrenches pretty well but electricity on a bike is another story.

Thanks for any help if you have it.
__________________
Lost time is never found
seasider is offline   Reply With Quote
Old 03-04-2013, 08:08 PM   #1007
seabee1
we build, we fight
 
seabee1's Avatar
 
Joined: Aug 2008
Location: Scottsdale, Arizona
Oddometer: 2,428
Quote:
Originally Posted by seasider View Post
I need some help here too.....just fried my Squadron!!!!
Bike came to me with a BD dual sport kit and I assumed it would be a plug and play but no such luck.
The good news is the light can be shipped back and repaired for $75 but noe I need to fix the issue and get D/C to the headlight.
How do I do this on my XR?????
I can follow directions and turn wrenches pretty well but electricity on a bike is another story.

Thanks for any help if you have it.

Bummer about the headlight! Is the bike treating you well aside from that?
__________________
"If guns cause crime, then all of mine are defective." Ted Nugent

www.dehmotorcycle.com
Motorcycle storage with a personal touch
seabee1 is offline   Reply With Quote
Old 03-11-2013, 12:22 AM   #1008
babuja
Gnarly Adventurer
 
babuja's Avatar
 
Joined: Jan 2007
Location: Luanda, Angola
Oddometer: 270
Does someone have the ED/DK XR 650R wiring diagram with go quality?
Cheers
__________________
Cheers guys
Babuja
________
KTM 950 ADV
www.babuja.smugmug.com
http://www.nomadstrail.net/site/
babuja is offline   Reply With Quote
Old 03-11-2013, 07:23 AM   #1009
crypto666
Beastly Adventurer
 
Joined: May 2011
Location: The best trails in Nevada
Oddometer: 1,050
Quote:
Originally Posted by babuja View Post
Does someone have the ED/DK XR 650R wiring diagram with go quality?
Cheers

The ones in the service manual are generalized diagrams, as they are all about the same for honda bikes of that genre.
crypto666 is offline   Reply With Quote
Old 03-11-2013, 08:24 AM   #1010
babuja
Gnarly Adventurer
 
babuja's Avatar
 
Joined: Jan 2007
Location: Luanda, Angola
Oddometer: 270
Quote:
Originally Posted by crypto666 View Post
The ones in the service manual are generalized diagrams, as they are all about the same for honda bikes of that genre.
Ok, but I don't have service manual in paper and the digital copy of the diagram have no quality.
__________________
Cheers guys
Babuja
________
KTM 950 ADV
www.babuja.smugmug.com
http://www.nomadstrail.net/site/
babuja is offline   Reply With Quote
Old 03-11-2013, 08:55 AM   #1011
crypto666
Beastly Adventurer
 
Joined: May 2011
Location: The best trails in Nevada
Oddometer: 1,050
Quote:
Originally Posted by babuja View Post
Ok, but I don't have service manual in paper and the digital copy of the diagram have no quality.

I know, its really hard to make out the color codes.

So my point was that any honda dirt MC wire diagram will likely answer your questions.

Green is ground (AC)

black/white is engine kill (short to ground to kill)

black/red is to your ign coil.

It all appears to be the same.
crypto666 is offline   Reply With Quote
Old 03-11-2013, 10:45 AM   #1012
babuja
Gnarly Adventurer
 
babuja's Avatar
 
Joined: Jan 2007
Location: Luanda, Angola
Oddometer: 270
Quote:
Originally Posted by crypto666 View Post
I know, its really hard to make out the color codes.

So my point was that any honda dirt MC wire diagram will likely answer your questions.

Green is ground (AC)

black/white is engine kill (short to ground to kill)

black/red is to your ign coil.

It all appears to be the same.
Ok, tnks...i'll test my electric draw hability

So, can this be done?



What part is the one indicated?

__________________
Cheers guys
Babuja
________
KTM 950 ADV
www.babuja.smugmug.com
http://www.nomadstrail.net/site/
babuja is offline   Reply With Quote
Old 03-11-2013, 10:57 AM   #1013
RideFreak
Green Chile Eater
 
RideFreak's Avatar
 
Joined: Apr 2009
Location: County Lockup, NM
Oddometer: 4,966
Quote:
Originally Posted by babuja View Post
Ok, tnks...i'll test my electric draw hability

So, can this be done?



What part is the one indicated?

part circled 4 pin mini connector, that looks like it's from a non US wiring diagram (ours is AC only). If it is from a non-us bike and those are the DC outputs from the VR/Reg that should work fine.
RideFreak is offline   Reply With Quote
Old 03-11-2013, 11:12 AM   #1014
babuja
Gnarly Adventurer
 
babuja's Avatar
 
Joined: Jan 2007
Location: Luanda, Angola
Oddometer: 270
Quote:
Originally Posted by RideFreak View Post
part circled 4 pin mini connector, that looks like it's from a non US wiring diagram (ours is AC only). If it is from a non-us bike and those are the DC outputs from the VR/Reg that should work fine.
That's correct, it's non US bike.

Tnks RideFreak
__________________
Cheers guys
Babuja
________
KTM 950 ADV
www.babuja.smugmug.com
http://www.nomadstrail.net/site/
babuja is offline   Reply With Quote
Old 03-11-2013, 11:17 AM   #1015
sintax
Gnarly Adventurer
 
Joined: Jan 2010
Location: So.Cal
Oddometer: 495
I read that as a 4 wire connector as well.
sintax is offline   Reply With Quote
Old 03-11-2013, 11:57 AM   #1016
crypto666
Beastly Adventurer
 
Joined: May 2011
Location: The best trails in Nevada
Oddometer: 1,050
Quote:
Originally Posted by RideFreak View Post
part circled 4 pin mini connector, that looks like it's from a non US wiring diagram (ours is AC only). If it is from a non-us bike and those are the DC outputs from the VR/Reg that should work fine.

If you look in the english service manual it shows diagrams using other languages as well. And it is generic and not specific to the xrr, which is why they show both dc and ac systems, turn signals, horn, etc, that was never a factory option. A factory bike will NOT have a R/R.

Your diagram will work. However, is that power to your GPS going through any sort of voltage regulator? Or does your GPS work on 12V dc?

One thing I would be careful of is that the power out of a reg/rect is not very clean (why they use a capacitor and call it a condensor), especially if there is no battery in the circuit, and it can raise hell with electronics, including HID lights. So you will want to clean the power up using capacitors, coils, batteries, loads, anything to keep the voltage from spiking.
crypto666 is offline   Reply With Quote
Old 03-11-2013, 12:43 PM   #1017
babuja
Gnarly Adventurer
 
babuja's Avatar
 
Joined: Jan 2007
Location: Luanda, Angola
Oddometer: 270
Quote:
Originally Posted by crypto666 View Post

Your diagram will work. However, is that power to your GPS going through any sort of voltage regulator? Or does your GPS work on 12V dc?
No voltage regulator except the rect/reg device in the image. I believe it does some kind of voltage regulation.



Yep, GPS (Garmin 60csx) accept AC or DC power 12V.

Quote:
Originally Posted by crypto666 View Post
One thing I would be careful of is that the power out of a reg/rect is not very clean (why they use a capacitor and call it a condensor), especially if there is no battery in the circuit, and it can raise hell with electronics, including HID lights. So you will want to clean the power up using capacitors, coils, batteries, loads, anything to keep the voltage from spiking.
No battery...Ok, I'll try to use multimeter and see if the voltage have large flutuation. Tnks
__________________
Cheers guys
Babuja
________
KTM 950 ADV
www.babuja.smugmug.com
http://www.nomadstrail.net/site/
babuja is offline   Reply With Quote
Old 03-11-2013, 12:55 PM   #1018
crypto666
Beastly Adventurer
 
Joined: May 2011
Location: The best trails in Nevada
Oddometer: 1,050
Quote:
Originally Posted by babuja View Post
No voltage regulator except the rect/reg device in the image. I believe it does some kind of voltage regulation.



Yep, GPS (Garmin 60csx) accept AC or DC power 12V.



No battery...Ok, I'll try to use multimeter and see if the voltage have large flutuation. Tnks

It appears that you are using a Honda OEM R/R?
With the bike running and nothing using power, check the voltage across the capacitor. It shouldn't go above 14v dc.

I have found that with the Tymphanium R/R sold by Ricky Stator, it will charge a capacitor to over 17vdc unless there is a battery in the circuit. With no capacitor, load, or battery the output of the R/R is all over the place and acts like it isn't even functional. If you plug in sensitive electronics with this condition, it is likely to kill them. I think this is why the Trailtech units have the blue wire; to keep it from over charging.
crypto666 is offline   Reply With Quote
Old 03-11-2013, 01:22 PM   #1019
babuja
Gnarly Adventurer
 
babuja's Avatar
 
Joined: Jan 2007
Location: Luanda, Angola
Oddometer: 270
Quote:
Originally Posted by crypto666 View Post
It appears that you are using a Honda OEM R/R?
Yep

Quote:
Originally Posted by crypto666 View Post
With the bike running and nothing using power, check the voltage across the capacitor. It shouldn't go above 14v dc.
Just bought a multimeter especialy for that. I'll put some results as soon as I get my hand on PIG ;)
__________________
Cheers guys
Babuja
________
KTM 950 ADV
www.babuja.smugmug.com
http://www.nomadstrail.net/site/
babuja is offline   Reply With Quote
Old 03-11-2013, 04:03 PM   #1020
Jayrod1318
Probably drunk
 
Jayrod1318's Avatar
 
Joined: Jun 2011
Location: Here and there and stuff.
Oddometer: 1,336
Incandescent front turns and led rear turn signals.

By my calculations this should work just fine on my all AC system. I broke the incandescent rears off and I'm trying to shave some watts using the stock stator. My 55 watt headlight dims a lot with the use of the turn signals. I also have the wheeling cycle supply led inner brake tail light.

Comments suggestions?
__________________
Jayrod1318 is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 03:45 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014