ADVrider

Go Back   ADVrider > Bikes > Orange Crush
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 03-10-2013, 12:31 PM   #1
superpimp OP
Adventurer
 
Joined: Jun 2012
Oddometer: 58
Yes another canisterectomy question!!

Hey guys i have been checking the canisterectomy threads but not really finding what i'm looking for.

I have a super enduro 2007 and want to take off the canister but not the SAS since i'm keeping original exhaust on it.On the KTM.info page they say not to remove the SAS if your keeping your OEM exhaust , because iit will cause internal damage to the CAT.

So a friend of mine showed me how to do it .But i still wondering if it done right.

They say you need to put two screws in the heads on the left side of the bike.
That's done

Then... on the right side two tubes come out and are supposed to be plugged with a screw or a cap.This is where i'm confused.

On my Setup one hose is plugged with a screw and a retainer and the other goes and plugs up to the SAS that big valve behind the airbox.

Is that ok?

Most guys on the net plug both hoses, since the SAS valve is gone, but mine is being kept.

Thanks for the input
superpimp is offline   Reply With Quote
Old 03-11-2013, 08:46 AM   #2
Katoom119
Mmmm....Orange Kool-aid
 
Katoom119's Avatar
 
Joined: Jun 2007
Location: Knoxville, TN
Oddometer: 1,771
The whole purpose of those side tubes is for when you sync the carbs. I would bet that plugging the one hose into the back of the airbox would throw off that cylinder's air/fuel ratio. Grab another screw and fix that tube like the other one, then cap the vent from the back of the airbox.
__________________
Those who dance are considered crazy by those who do not hear the music.
I am not the same having seen the moon shine on the other side of the world. - Radmacher

5 Cylinders vs. Moab..........My East Tennessee.........Internships may go to Hell and I will go to Alaska
Katoom119 is offline   Reply With Quote
Old 03-11-2013, 11:42 AM   #3
KEELAYMONSTER
BRRAAAAPPP!!!
 
KEELAYMONSTER's Avatar
 
Joined: Feb 2012
Location: Pleasanton, CA
Oddometer: 146
If you are keeping the SAS, then yes you leave the hose connected to the valve behind the air box and plug the other
__________________
Kyle Montagne #141K
KEELAYMONSTER is online now   Reply With Quote
Old 03-11-2013, 01:16 PM   #4
Katoom119
Mmmm....Orange Kool-aid
 
Katoom119's Avatar
 
Joined: Jun 2007
Location: Knoxville, TN
Oddometer: 1,771
I may be thinking of a different plug. When I had my SE I used this:

http://www.ktm950.info/how/Orange%20...pc_removal.htm
__________________
Those who dance are considered crazy by those who do not hear the music.
I am not the same having seen the moon shine on the other side of the world. - Radmacher

5 Cylinders vs. Moab..........My East Tennessee.........Internships may go to Hell and I will go to Alaska
Katoom119 is offline   Reply With Quote
Old 03-11-2013, 04:11 PM   #5
KEELAYMONSTER
BRRAAAAPPP!!!
 
KEELAYMONSTER's Avatar
 
Joined: Feb 2012
Location: Pleasanton, CA
Oddometer: 146
Are you keeping your SAS?

If so then leave the line on from the cylinder head to SAS valve behind the airbox. Plug the other line from the other cylinder.
__________________
Kyle Montagne #141K
KEELAYMONSTER is online now   Reply With Quote
Old 03-12-2013, 06:12 AM   #6
superpimp OP
Adventurer
 
Joined: Jun 2012
Oddometer: 58
Where do you guys get the caps?

Yep on the last tutorial the guys removed the EPC and the SAS.
In my case it's only the EPC being removed.
superpimp is offline   Reply With Quote
Old 03-12-2013, 04:47 PM   #7
superpimp OP
Adventurer
 
Joined: Jun 2012
Oddometer: 58
thanks for the answer! i'm re-assured now that its plugged right.
superpimp is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 11:58 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014