|04-07-2013, 09:40 PM||#11|
Joined: Sep 2005
Location: Fort Collins
I am in the process of adding a 55W HID hi/lo and LED flood lights. I welded sturdy tabs on the front of my nerf bars for the flood lights. As with any electrical project, the most time consuming part is doing tidy wiring.
I provided power to both sets of lights directly from the 15A fused and switched connection used for lights. I wanted independent on/off for either light, and an indicator light for each light. While I was at it, I added another switch to dim the indicator lights.
Went from this:
Here's the dash with all lights off:
With indicator LEDs on daytime brightness:
LED Dimmer engaged:
The LEDs and 10A switches are from Highway Dirt Bikes. As received, the LEDs are painfully bright. I added another 1k resistor to dim it for the daytime setting. The nighttime setting uses a 22k resistor.
The switch over by the 12V outlet is my ABS disable.
We don't stop riding because we get old, we get old because we stop riding.
"Wisdom is knowing what to do next, Skill is knowing how to do it, and Virtue is doing it"
|Thread Tools||Search this Thread|