Go Back   ADVrider > Gear > Vendors
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-08-2013, 05:07 AM   #1
Dan Căta OP
Beastly Adventurer
Dan Căta's Avatar
Joined: Jun 2008
Location: Cluj, Romania
Oddometer: 1,667
BMW R1100S R1150 RS/GS/R/RT clutch slave cylinder repair kit

I have started to make repair kits for BMW R1100S and R1150GS RS R RT hydraulic clutches.

At some point in the bike's lifetime, the clutch actuation system starts to leak. This is most likely because the clutch fluid has not been changed when it should have been changed. What happens is that the brake fluid level in the reservoir starts to get lower, and it can get to the clutch friction plate, making it slip. This would be the worst case scenario. Usually, the level stays the same, or drops very slow, because as the clutch material wears, the level in the reservoir rizes, and if the seal is leaking, the effects somehow compensate oe for each other.

The pump does not scratch and the piston has no damage either. Getting the brand new system, as new, is a waste of money IMHO.

The kit contains:

- new piston rubber seal;
- new gasket between the cylinder and the gearbox;
- new seger C-clip

The OEM system costs 147$, +/-. Ther repair kit is sold for 55$, shipping included, worldwide!

Ordering will be available via my webshop, in the signature(shortly).

Dan Cata
Dan Căta is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 05:20 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015