|04-09-2013, 04:44 PM||#1|
Joined: May 2008
No electrical power
2006 950 Adventure
Battery was dead (wouldn't hold a charge). Ordered a new one. A neighborhood kid has been helping me with some small projects. He put the new battery in and accidentally grounded the wrench on the aluminum plate above the battery.
No ignition, no power.
The ignition fuse (10amp) seems fine. With a tester there is no power to the fuse that I can see. Of course, at the same time, the battery on my multi meter died so I was only using a test lamp.
Either way, the manual has the power from the battery going to the 10amp fuse, then to the ignition.
Any suggestions on what I should test for next?
Thank you in advance. Hoping to get this going by Saturday so I can ride!
|Thread Tools||Search this Thread|