ADVrider

Go Back   ADVrider > Gear > Vendors
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 04-03-2013, 11:25 AM   #2746
Pajss
Adventurer
 
Joined: Sep 2012
Oddometer: 73
Eek I might be late to the party......

I have a question......I have a 2000 Cagiva Gran Canyon, with SanRemo tube-type rims. The front is a 2.15" x 19" 36 spoke/hole rim, and the rear is a 4.25" x 17" 36 spoke/hole rim. The spokes appear to be stainless and are 3.5mm with straight pull style hubs. My current wheelset is polished/clearcoated and the clearcoat is coming off. The wheelset is true with no issues other than clearcoat. These are street wheels. My interest ......Use my hubs and rebuild with...
Tubeless spoked rims ..................
Better tube-type rims ..................
Any thoughts, approximate, prices, timeline ?
Thank you for your time.
Kary Schneider
Pajss is offline   Reply With Quote
Old 04-04-2013, 09:59 AM   #2747
woody's wheel works OP
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,346
Super lacing and spoke options for Excel rims.

Hi Danny,

We do have to drill/countersink both the hubs and rims to allow the superlace. It would only be 30 per wheel for us to drill them both, and 128 ea. wheel for the stainless steel spokes/nipples.

We can also supply aluminum nipples for 50 for the front , and a rear stainless steel spoke/nipple kit for 99.

The superlace is very worth it because it adds very little weight, and makes the wheel much more durable. We take all the break in out of the wheel's with the superlace if done properly.

If you wanted us to lace/true them it would be 111 for the superlace on ea. wheel.

Best thing is to stop by and we can get you taken care of.

Thanks zach



Quote:
Originally Posted by dannyc1225 View Post
Hi Woody,

I have some (21/18) Aftermarket excels (8.5mm holes) for my YZ250 (2009) ready to go. I haven't bought spokes yet..

1) Can these rim's be super laced without drilling/resinking nipple seats? Visually, it looks like the nipple seats and bores can accommodate the little extra angle from the x-3.
2) If so can I buy the superlace spokes from you and build the wheels myself? (I have built a couple wheels a while ago but would really like to do it since I've got some time before the season begins)
3) My riding history says that I am not that hard on wheels so I dont think I would see the value of oversized spokes? (Would like to keep the wheels light)
4) Would you be able to quote me:
a) superlace spokes F & R if possible? or
b) 8.5mm alu nipples for the front oem spokes and 18" cross-2 spoke set for the rear?

THANK YOU!!
Danny (I'm in Denver)
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W
woody's wheel works is offline   Reply With Quote
Old 04-04-2013, 10:02 AM   #2748
woody's wheel works OP
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,346
Cagive Wheel options

We can lace new excel rims, 2.5 x 19 front and 4.25 x 17 and stainless steel spokes/nipples then seal themf or tubeless tires. It would be 1175 + shipping for the silver excel rims, stainless steel spokes/nipples, lace/true and sealing.

If your rims have safety bead's without the serrations in the bead area we can possibly recondition them and seal them for tubeless tires. The price can vary from 300-450 per wheel depending on what is needed.

It would be best to send some pics of your wheels to woodyswheelworks@gmail.com to get a better estimate.

thanks zach

Quote:
Originally Posted by Pajss View Post
I have a question......I have a 2000 Cagiva Gran Canyon, with SanRemo tube-type rims. The front is a 2.15" x 19" 36 spoke/hole rim, and the rear is a 4.25" x 17" 36 spoke/hole rim. The spokes appear to be stainless and are 3.5mm with straight pull style hubs. My current wheelset is polished/clearcoated and the clearcoat is coming off. The wheelset is true with no issues other than clearcoat. These are street wheels. My interest ......Use my hubs and rebuild with...
Tubeless spoked rims ..................
Better tube-type rims ..................
Any thoughts, approximate, prices, timeline ?
Thank you for your time.
Kary Schneider
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W
woody's wheel works is offline   Reply With Quote
Old 04-04-2013, 07:40 PM   #2749
johnwesley
wanta be
 
johnwesley's Avatar
 
Joined: May 2006
Location: mena, Ar
Oddometer: 1,541
I need to get a wheel rebuilt. I had you do the superlace on a 21" yz hub for my sportster project. I crashed it and the front wheel needs a rebuild. This time I want to go with a 19 " what's the options and price?


here is the bike before crash

johnwesley is offline   Reply With Quote
Old 04-05-2013, 04:34 AM   #2750
woody's wheel works OP
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,346
how much to move rim over 10mm for proper alignment???

ok real bigman,,my answers/comments in bold/yello


Quote:
Originally Posted by therealbigman View Post
Woody ,


These are the exact numbers I come up with , not exactly the same manner , but nevertheless , the same answere . 4.5mm

...there are ''hundreds of ways to Rome,,there are hundreds of ways to kneel and kiss the ground''


I even mentioned this number to the builder before I sent thim and he said no problem.
,,,,there are some slow learners ut there!

I have a few sets of this setup and sent pics with a straight edge clamped underneath each rotor sticking out to edge of hoop showing where the hub should be located and sent pics of the 1 that's not correct to compare and he still cant get it .
,,,,like i just said,,,there are some....

Chain , with this number there is no chain rub with a 150 , I would imagine if ya wanted to squeeze a 160 in you could prolly cheat the offset over 10-12 mm if the spoke drill on the rim would allow that .
,,,,FYI,,,if ya move it over too far we may need to shorte the spokes on the side beinf moved to and lengthen the opposite side...it may also need to have the holes re-angled and countersunk....
Now ,
How much to move my hub over 10mm , which is what its currently out .

1,,,,circa $50-60 to move over and retrue. if you are lucky [ we'll know as soon as we see it and tell ya what needs to be done.
2,,,an extra spoke kit if yours runout of thread
3,,,an unlace n re-lace/rim re-bore


woody





__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W
woody's wheel works is offline   Reply With Quote
Old 04-05-2013, 08:53 PM   #2751
regnock
Gnarly Adventurer
 
Joined: Jan 2010
Location: Central New York
Oddometer: 96
Hi Woody,

Do 21" HP2 spokes work with R100GS rim/1200GS Hub Combo, if so do you know if their stainless?

Thanks
__________________
Past, Present and Future Ride Reports:
http://thecongers.org/
regnock is offline   Reply With Quote
Old 04-06-2013, 12:58 PM   #2752
woody's wheel works OP
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,346
21'' HP-2 spokes,,ss or not etc???

Quote:
Originally Posted by regnock View Post
Hi Woody,

Do 21" HP2 spokes work with R100GS rim/1200GS Hub Combo, if so do you know if their stainless?

Thanks
FYI,,,most all bmw spokes are interchangeable,,,,most all spokes post '98 have been ss..so yes,,we always use thes for all our r100gs r100gs/pd repairs,,

FYI,,we also have our ss beefier Super-Tuff spokes and ss nipples for Superlacing any BME X-laced wheel....

FYI,,if you are planning on re-building the X-laced wheel your self,,be forewarned you like most everyone else may live to regret it...the good news is that we are ready willing and able to clean up the mess not to mention provide you with parts an dadvice along the way

thanks for the inquiry
woody
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W
woody's wheel works is offline   Reply With Quote
Old 04-07-2013, 10:27 AM   #2753
regnock
Gnarly Adventurer
 
Joined: Jan 2010
Location: Central New York
Oddometer: 96
Quote:
Originally Posted by woody's wheel works View Post
FYI,,,most all bmw spokes are interchangeable,,,,most all spokes post '98 have been ss..so yes,,we always use thes for all our r100gs r100gs/pd repairs,,

FYI,,we also have our ss beefier Super-Tuff spokes and ss nipples for Superlacing any BME X-laced wheel....

FYI,,if you are planning on re-building the X-laced wheel your self,,be forewarned you like most everyone else may live to regret it...the good news is that we are ready willing and able to clean up the mess not to mention provide you with parts an dadvice along the way

thanks for the inquiry
woody
I might take you up on that offer. :)

How much would your Super-Tuff spoke/nipple combo be?
And how much for the lacing and truing?

Thanks
__________________
Past, Present and Future Ride Reports:
http://thecongers.org/
regnock is offline   Reply With Quote
Old 04-07-2013, 01:24 PM   #2754
Butters
. . . . . .
 
Butters's Avatar
 
Joined: Oct 2008
Location: NoVA
Oddometer: 2,460
Hi Woody,

A friend just bought a setup from you for his X-Challenge and may give me a deal on his old wheels. How much to lace up a set of 17" wheels if I supply the OEM hubs? in the alternative, how much to lace up a 19" front if I supply the hub? I'm looking to go budget as these will just be a fun set of wheels. thanks.
__________________
Marc
07 XChallenge
Butters is offline   Reply With Quote
Old 04-08-2013, 06:51 AM   #2755
woody's wheel works OP
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,346
Re-lacing X-Challenge to 17"st-up+19" front,,low$$$$=???

Quote:
Originally Posted by Butters View Post
Hi Woody,

A friend just bought a setup from you for his X-Challenge and may give me a deal on his old wheels. How much to lace up a set of 17" wheels if I supply the OEM hubs? in the alternative, how much to lace up a 19" front if I supply the hub? I'm looking to go budget as these will just be a fun set of wheels. thanks.
This is just a quick N Dirty off the cuff quote since I'm leaving for Hawaii in a few minutes,,,

The 17" front/rear = circa $800-1K depending on availability of used rims/lace technique,,I'm sure we don't have Any used spoke kits around...

The 19" front = circa $350-450+

Call the number below ,,ask for Zach my right hand wizard,,,he has abetted handle what's in our used parts department or maybe even used wheel dept,,,will give you credit for your hubs,,

Mahalo uni loa ,,,as they say in Hawaii...

Woody
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W
woody's wheel works is offline   Reply With Quote
Old 04-08-2013, 06:58 AM   #2756
woody's wheel works OP
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,346
Super sizing/Superlacing R100GS/PD. $$$=????

Quote:
Originally Posted by regnock View Post
I might take you up on that offer. :)

How much would your Super-Tuff spoke/nipple combo be?
And how much for the lacing and truing?

Thanks
I believe the Supertuff kits are circa $240 + $150 X-lace n true + unlace prep fee of $30-80 depending on how hard they come apart

Call number below,,ask for Zach for more info,,
Like I mentioned earlier ,,am leaving for Hawaii for much needed R&R

Woody
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W
woody's wheel works is offline   Reply With Quote
Old 04-09-2013, 08:32 PM   #2757
Butters
. . . . . .
 
Butters's Avatar
 
Joined: Oct 2008
Location: NoVA
Oddometer: 2,460
Thanks for the prices. Enjoy Hawaii!

Quote:
Originally Posted by woody's wheel works View Post
This is just a quick N Dirty off the cuff quote since I'm leaving for Hawaii in a few minutes,,,

The 17" front/rear = circa $800-1K depending on availability of used rims/lace technique,,I'm sure we don't have Any used spoke kits around...

The 19" front = circa $350-450+

Call the number below ,,ask for Zach my right hand wizard,,,he has abetted handle what's in our used parts department or maybe even used wheel dept,,,will give you credit for your hubs,,

Mahalo uni loa ,,,as they say in Hawaii...

Woody
__________________
Marc
07 XChallenge
Butters is offline   Reply With Quote
Old 04-09-2013, 10:59 PM   #2758
PaulGinAZ
FNG
 
PaulGinAZ's Avatar
 
Joined: Jul 2007
Location: Chandler, Arizona
Oddometer: 259
Thanks for straightening out the front wheel on my GS before taking off Woody! I am looking forward to getting it back for this weekend.
__________________
-Paul
- All bikes gone... thanks for the memories!
-2013 Yotota Tacoma TuRD (daily)
-1989 VW Syncro Tristar TDi (long-term project)
-Too many bikes and cars in my sordid past to list...
PaulGinAZ is offline   Reply With Quote
Old 04-11-2013, 08:36 PM   #2759
woody's wheel works OP
Built to Last
 
woody's wheel works's Avatar
 
Joined: Jun 2004
Location: 39*40'33.86N 104*59'54.69W
Oddometer: 3,346
Woody' appreciate's what everybody has done for him and all of us at Woody's

As much as Woody love's buiding and truing wheels...he has bigger fish to fry. FYI, he has empowered myself and others to take care of all the wheel's including all the X-laced wheel truing and servicing. He's taking on a much bigger role of designing new stuff and over the past year getting his dream shop in place after purchasing the missing link...the 7,500 square foot adjoining building. He's off to Hawaii for a few days acting as tour guide for some dear freinds from old Germany. He'll be back at next week on the 24th....

Thanks for everything and let us know how you like the straight wheel.

zach

Quote:
Originally Posted by PaulGinAZ View Post
Thanks for straightening out the front wheel on my GS before taking off Woody! I am looking forward to getting it back for this weekend.
__________________
If you have any questions... Post Em Here
..For more info check our website...
www.woodyswheelworks.com
....Wanna e-mail us... woodyswheelworks@gmail.com
......Wanna talk,,,call us
toll free... 1-866-936-0232
........If you're lost???... GPS = 39*40'33.86N x 104*59'54.69W

woody's wheel works screwed with this post 04-25-2013 at 12:33 AM
woody's wheel works is offline   Reply With Quote
Old 04-12-2013, 08:45 AM   #2760
MJS
Beastly Adventurer
 
MJS's Avatar
 
Joined: Dec 2005
Location: SD, CA, Baja or somewhere else
Oddometer: 1,849
Zac,

Thanks for the wheels. The X-Project begins

__________________
"You can follow me, but it's gonna hurt"

http://www.blackswanmoto.com
MJS is online now   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 12:39 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014