ADVrider

Go Back   ADVrider > Bikes > GSpot > GS Boxers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-27-2013, 01:40 PM   #1
cbrandon OP
Adventurer
 
Joined: Jan 2013
Location: New England, CT
Oddometer: 21
BUM Rick Mayer Seat... ANY IDEAS??

Just purchased a pre-owned Rick Meyer seat from an inmate on here. Got the seat in... when locked in, the seat pan is so mis-shaped that it does not align with the tank at all (does not fit flush against the sides or lay on the foam strip in the front).

I called Rick Mayer and he mentioned that if the leather was not properly treated, it could have shrunk and pulled at the seat pan. He recommended that I use a heat gun to heat and bend the seat pan. After doing that, The seat pan is now bent properly (sides where knees fall corrected), however when locked in to either position (short or tall) the front is still 1" to 1.5" from resting in its proper location up against the tank.

The only way that it is somewhat corrected is if I put the back in the tall position, and the front in the low position. But when doing that... the seat cannot lock in and the passenger pillion does not have space to lock in either.

I am at my wits end with this seat but I'd like to not think that I've wasted this chunk of change. Anyone have similar issues? Anyone have any ideas??

This is before the "heat and bend"



cbrandon is offline   Reply With Quote
 

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 08:29 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014