ADVrider

Go Back   ADVrider > Gear > Vendors
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-12-2013, 04:38 PM   #76
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
new warning page

This is the new warning page that will go out with every 2-part and 3-part Rumbux kit I sell. I'll be editing this into the first post as well. It's intended to make riders aware of the dangers, not scare them off the product. But I'm sure I'll lose a few customers because of it. At some point, every bike will drag hard parts, but I want people to understand the potential risks. Most Super Ten riders probably will never scrape pegs, but there certainly is a contingent that does. ::008::

*****!Warning!*****!Warning!*****!Warning!*****


Adding aftermarket accessories to your motorcycle can alter the ground clearance. You may need to adjust your riding style to avoid contact with the ground during aggressive cornering or on uneven ground.

*****!Warning!*****!Warning!*****!Warning!*****

When properly installed, this Rumbux Crash Bar will cause your Super Tenere to be wider and lower than prior to it's installation. Because of this, it is possible to contact the ground just after the left side footpeg feeler will scrape during high lean angle turns and before the center stand contacts on the right side. This can result in levering the rear wheel off the ground, and directly or indirectly cause a crash resulting in motorcycle damage, injury or death!

*****!Warning!*****!Warning!*****!Warning!*****

By installing this product you are accepting responsibility for your own actions!

EVal Innovations can not control how you ride. Please use caution until you understand if and how the installation of your new Rumbux crash bar system impacts your riding style.

EVal Innovations Inc. is not liable for injuries or damages resulting from crashes where the crash bars may have contacted the ground during riding. By installing Rumbux Adventure Products on your motorcycle, you implicitly accept these terms, and responsibility for your actions of choosing to install this product and choosing to ride in a manner which could cause motorcycle damage, injury or death.

*****!Warning!*****!Warning!*****!Warning!*****

Motorcycling is an inherently dangerous activity. Please ride aware, ride safe and ride often.

Thank you for your purchase!
-------------------------------------

The actual page has the "warning!" in red, but yellow shows up better here.

Dirty bike screwed with this post 05-12-2013 at 05:03 PM
Dirty bike is offline   Reply With Quote
Old 05-25-2013, 03:39 PM   #77
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
At this point I am taking pre-orders for an order to be placed with Rumbux at the end of June, with delivery to customers in early July. If you're interested, now is a good time to ping me.

I also have one 3-part kit in stock and ready to ship at $775.

FYI - I also have XTZ stickers in stock and available for immediate shipment at $4.50 ea. These are a shared profit item that includes a donation to the Super Tenere Forum.

Dirty bike is offline   Reply With Quote
Old 06-18-2013, 04:22 PM   #78
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
I was going to place another order with Rumbux before I head out for a month of riding, but as it stands now, I have zero pre-orders and I pretty much need 5 items to make the air freight charges work out on an order. It takes a couple of days to manage the funds and get the wire transfer done, which means the 20th is about as late as I can make an order happen before I take off on the morning of the 25th. The IBR is going to create a big set of bills to pay off and won't allow me to order on speculation for a while, only as people place orders with me and we build to 5 or more.

If you're wanting Rumbux, PM or email me and if the demand is there, I'll make it happen.

Eric V.
Dirty bike is offline   Reply With Quote
Old 08-14-2013, 11:05 AM   #79
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
I'm BACK!

Just bumping the thread to let people know that I am back from my vacation, (riding the IBR and wandering home on the back roads with the wife).

I am building an order that I hope to place with Rumbux in Sourth Africa in the next two weeks. If you're interested or have questions, now is an excellent time to contact me.

Pricing remains the same at this time:

Full 3-Part Kit - Fulling integrated system of Upper Crash Bars, Lower Bash Frame & Skid Plate - $775 delivered to your door.

2-Part Kit - Lower Bash Frame & Skid Plate - $475 delivered to your door.
(This uses the same parts from the 3-Part kit and the Upper Crash bars can be added later)

OEM Add On Upper Crash Bars - $375 delivered to your door.
(This replaces the upper hoop on the Yamaha® OEM crash bars, adding greater radiator and body protection.)

Soft Pannier Brackets - $200 delivered.

Light Brackets - $40 (Free shipping with any other product, otherwise $6 shipping in the lower 48.

4.5 mm Skid Plate - $80 shipped.
(This is standard now, but older units had 3mm thick Skid Plates)

All prices included delivery to the Lower 48 US States, residential or business. AK can be done for the 2-Part via USPS. Canada is an extra $100, but I am willing to ship to a UPS store location in the US, which will hold the product for a small fee.

I am also able to get Rumbux crash bars for the BMW F650/700/800 series bikes and the KTM 1190 Adventure. Pricing should be comparable, but I have not seen Rumbux pricing on those as yet.

This order should reach customers at the beginning of October.

PM and emails are great too. Phone is 435-817-0809 9am to 9 pm MDT appreciated.

Eric V.
EVal Innovations Inc.
Ivins, UT

Dirty bike screwed with this post 08-14-2013 at 11:55 AM
Dirty bike is offline   Reply With Quote
Old 11-19-2013, 02:15 PM   #80
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
Bumping this thread for the new order. I have 3 on board and will be placing a new order with Rumbux shortly if we can get a couple more on board. Everything is the same, except I have lowered the price on the three part kit. Current pricing is as follows. Feel free to re-post this to other forums along with my email addy eric.gonedark@gmail.com The KTM boards or GS800 guys might be interested, but I'm having difficulty getting on the KTM board due to their policies and I'm not willing to violate their forum rules. All prices are with free shipping in the lower 48 US states.

S10 3-Part kit (Upper crash bars, lower bash frame & skid plate) - $750
S10 2-Part kit (lower bash frame and skid plate) - $475
OEM Add on upper crash bars for the Yamaha OEM bars, (replaces the oem upper hoop with better side protection) - $375
Light brackets, (pair), for OEM Halogen or PIAA 530s (can be used for most single post lights too) - $40 with any order. Separate would be plus shipping costs.
S10 Soft Pannier brakcets - $200
http://www.youtube.com/watch?v=N4fyWzv78eI

S10 Upper crash bars - $350 (shipping kills me on these, same size box as a full 3-Part kit, and same shipping cost)

F800GS 3-Part kit - $775
F800GS 2-Part kit - $500
http://www.youtube.com/watch?v=2MwdRh2sKjo

KTM 1190 3-Part kit - $800
KTM 1190 2-Part kit - $525
http://www.youtube.com/watch?v=__7F9avIz9E

Got questions? Please ask them! PM and email are fine too.
Dirty bike is offline   Reply With Quote
Old 11-25-2013, 01:10 PM   #81
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
Bump!

I will be placing an order with Rumbux on Wednesday Nov 27th, 2013

If anyone is interested in getting in on this order, please contact me and I'll make it happen. Call 435-817-0809, PM or email from my profile. It will take a phone call to get the CC info and finalize the order.

Thanks!
Dirty bike is offline   Reply With Quote
Old 01-07-2014, 12:50 PM   #82
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
The November order has shipped out to customers. I do have one 2-Part Kit, (Lower Bash Frame & Skid Plate), in stock and ready to ship. Also some light brackets, (1 used pair @ $35 shipped, 1 new pair @ 45 shipped, to US addresses).

I am also taking pre-orders for a new order with Rumbux. Hoping to place this in Jan and manage a Feb delivery. Still need a few to make that happen, so if you're thinking about ordering, now is the time to get in on this order and have your bars before Spring!
Dirty bike is offline   Reply With Quote
Old 02-18-2014, 12:57 PM   #83
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
On the cusp of placing another order with Rumbux, please contact me if you'd like to get in on this order. Delivery should be early April at this point, possibly sooner. That gets your crash bars to you before prime riding season starts, in many cases.
Dirty bike is offline   Reply With Quote
Old 02-19-2014, 08:55 AM   #84
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
I now have enough pre-orders to place my order with Rumbux and will be doing that on Monday. So if you want to get in on this order, please contact me before Monday!

Thanks!
Dirty bike is offline   Reply With Quote
Old 03-16-2014, 10:00 PM   #85
Buster452
Gnarly Adventurer
 
Buster452's Avatar
 
Joined: Sep 2009
Location: Gilbert, Arizona
Oddometer: 197
Happy Trails Crash Bars and Rumbux don't play well together

Unless you enjoy doing a bit of cutting, fabricating and welding the happy trails crash bars don't play well with the rumbux lowers.

I had the happy trails already when I wanted to add a skid plate. The rumbux was the top of my list for a skid plate, so I figured I'd see if it worked well with the Happy Trails crash bars.

The rumbux and happy trails both use the same forward mount points on the side of the bike. A friend with a welder and some creativity helped me get the happy trails mounted along with the rumbux.

The right side wasn't too bad. All we had to do was stack the happy trails mount tab on top of the mount tab for the rumbux. For this, we cut the happy trails mount tab off, shorted it up the width of the mount tab and welded back on.



The left side was a mess though. They both mount to the tab under the radiator and the rumbux tubing was sticking out so I couldn't stack the mount tabs. We had to cut and reroute the happy trail tubing round the rumbux. While we were at it, I noticed that the piece that holds the lower radiator was gone so we welded a chunk of pipe to hold the lower radiator also.




I'm happy with the results, but if I were to do it over again I would purchase the full rumbux setup. I have some pretty stout protection for the bike with this combo now though.




__________________
---
"If you don't know where you are going, any road will get you there." Cheshire Cat

The rides I've done and want to do.

Buster452 screwed with this post 03-16-2014 at 10:10 PM Reason: Fixed photos
Buster452 is offline   Reply With Quote
Old 03-17-2014, 07:49 AM   #86
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
Thanks for posting the pictures Buster. Glad you had the skills and friends to get it working for you, but wow, a bit more work than expected.

Looks great and should protect the bike very well.
Dirty bike is offline   Reply With Quote
Old 04-04-2014, 10:01 AM   #87
Dirty bike OP
EVal Innovations Inc
 
Dirty bike's Avatar
 
Joined: Apr 2011
Location: Ivins, UT
Oddometer: 711
Just an update. The order I just received is sold out and I am taking pre-orders for the next order that I hope to place with Rumbux in the next two weeks. If you want your crashbars for Spring riding, call me now to get in on the next order. With luck, delivery should be by the end of May. Pricing remains the same at this time. May go up later this year.
Dirty bike is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 07:25 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014