|05-31-2013, 08:05 PM||#1|
Joined: Jan 2010
Front Sprocket eating my chain guide?
I cracked open my front sprocket to swap my 16T for a 17T and I saw the chain guide chewed up. Is this normal? There does not seem to be any other issues that I can find.
Is this normal?
08 ADV, 16tx45t
The old girl does get a bit or a work out.
|06-02-2013, 12:23 AM||#2|
Joined: Sep 2004
Location: Main Street, Shedd, Oregon
Shit happens. You may have got a rock in there. The 16 th sprocket normally doesn't touch it. The 17 th will over lap, but there's a slight cutout to miss it.
Don't ride it like that, it will lock up the rear wheel when it lets go.
"Dad, can I get a motorcycle when I grow up?"
"Son, you can't do both"
|06-03-2013, 09:02 AM||#4|
Joined: Feb 2010
Uhaul, it's part of the KTM experience.
09 KTM 990 Adv
|06-04-2013, 12:24 AM||#5|
Life is a trip
Joined: Nov 2005
Location: East Med, Greece
Yes it is normal.
However, you should make sure the bolts that hold this plastic piece on the swingarm, are properly bolt. These bolts have been reported to get loose and create the problem Zuber is referring to. There is a nice fix, installing a bolt from the top to the bottom, M6x100 of the swingarm, as these two bolts are aligned.
There is always a reason!!
866394 874262 941552
gefr screwed with this post 06-19-2013 at 11:14 PM
|06-19-2013, 11:27 AM||#7|
Joined: Oct 2005
Location: Diamond Bar, CA.
I just replaced the chain slider on a 950.
It had completely worn though and came off in two pieces.
As stated before, it would have been BAD if it had come off and gotten in the rear sprocket while riding.
Something to check guys.
|Thread Tools||Search this Thread|