Go Back   ADVrider > Bikes > Orange Crush > Crazy-Awesome almost Dakar racers (950/990cc)
User Name
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 08-18-2013, 02:23 PM   #1
Cycletech OP
Studly Adventurer
Cycletech's Avatar
Joined: Aug 2008
Location: North Side RVA
Oddometer: 569
Eek 950A with a blown headgasket? Update: Used engine going in

So before I get into this any further, I need some sage advice. A few months ago during an 800 mile day my 05 950 started blowing coolant. I didn't realize it at first, only when I got stuck trying to make my way around Atlanta and the temp started climbing did I know something was up.

I nursed it through that trip keeping the revs down and adding coolant each morning; made it back to RVA without any other issues.

So... I was really hoping a radiator cap is all she needed.. new cap and the same problem; blows coolant from the overflow, into the bottle, then all over my leg. Nursed it through another (shorter) trip, but now she's coming apart for repair.

I'm assuming I have a weak head gasket, but I won't know for sure until I pull it apart. So before I pull the heads - Any words of wisdom? If the heads come off new rings and valves will go back in. Does Kibblewhite make valves and guides for the 950?


Cycletech screwed with this post 08-21-2013 at 09:01 AM
Cycletech is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Times are GMT -7.   It's 12:56 PM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2015