|08-22-2013, 10:04 PM||#1|
Joined: Feb 2006
Location: British Columbia , Canada.....Eh
Gotta bleed the clutch ....again.
Ok ok....I know , the stock slave is no good.
I do not have a fluid leak at the slave or the master, the level does not go down.
Ususlly every frkn week I have had to bleed the clutch, but on a recent day 1000km fsr ride I had to bleed it once a day.
It works fine then all of a sudden the lever just feels slightly different and when I pull in the clutch it doesn't quite drag , but when releasing the lever it grabbs sooner(when the lever is only slightly off the grip)
when I bleed the slave I get a burp of air out of it, the air and a slightly small amount of oil shoot up and out of the bleeder (got me in the eye....once).
SO I remove the master cover and the fluid level is ok, but I bleed the entire system anyhow.
another rider mentioned that maybe it's moisture in the oil and it's boiling in the slave....hmm
NO FREAK'N LEAKS !!
Life's short...ride far
Over 2000 plated dirt riders...Digg'n up the dirt every other day, all over BC
|Thread Tools||Search this Thread|