where can i get orings on fuel inlets to carbs?
I have a 06 950 supermoto, i noticed that fuel is leaking around one of my fuel inlets on my carbs. You can move it slightly and it leaks worse. I took off the metal brace that holds them in and pulled the brass 90deg inlets out of the carbs, each one has 3 orings. None of the orings are torn or appear to have any damage, I guess they are just old and have shrunk/compressed enough to allow a fuel leak. I looked up on ktm microfiche and see that the 6 orings (3 on each inlet) come in a gasket kit for the whole motor for about $150.00. I'm sure there is a generic fuel tolerant oring that will work. Has anybody replaced, or know a part number of an oring that will work? Thanks