|10-13-2013, 08:55 AM||#1|
Joined: Jul 2011
A2DPblocker iPhone, Sena SMH10 and Garmin 765T: WORKS
I got a Garmin 765T from eBay to try and beat the cost of a Zuma for a while. After working with the iPhone, 765t and SMH10 each would pair, but it ended up being one or the other not both at the same time.
Surfing last night I found an app called A2DPblocker for the iPhone and tried it to see if it would work and it did. It allows the SMH10 to hear the 765T for direction and MP3 plus receive and make calls with the iPhone. You have to connect up to the SMH10 in a certain order to get it all to work but so far it is working.
Load A2DPblocker on the iPhone turn it off for now.
Pair to the SMH10 normally. Check and make sure it works.
If it work go in to iPhone setting and disable Bluetooth for now.
Pair the 765T to the SMH10 using Audio pairing on the 765T and Multipoint on the SHM10. Check and make sure it works.
Now back to the iPhone go to A2DP blocker and turn it on.
Then go back the Bluetooth setting and turn it on.
It should connect. (The iPhone might give an error but it will work.)
Once you done the Setup,
Start up should be done this way
Turn the iPhone Bluetooth off for Startup
The Garmin 765T needs to connect first to the SMH10 then the iPhone (That's why you have to turn Bluetooth off on the iPhone)
Hope this makes sense your on your own.
|10-13-2013, 03:51 PM||#2|
Joined: Nov 2007
Location: Mostly Miserable Michigan
I need to try this with my Zumo 665 and iPhone. My iPhone always grabs the stereo profile when I want to stream music from my Zumo.
SCOTT---BIG DREAMS - small wallet
KTM Superduke R, Honda XR650R, Triumph Trophy
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|