Originally Posted by COXR650L
OK I have started getting the bike torn down and most of the parts are here.
This summer one of the oil line going into the oil tank was cracked. This part....
It is the rubber hose, and its $72
I went to the auto parts store and found one that fit, but now that Im looking at it I doubt its oil resistant because it is soft and ballooned out.
I refuse to pay almost $75 for a rubber 3/8in hose. Anyone have a good recommendation for a replacement. The biggest issues is the 90deg bend other than that a straight piece of hose will work.
Any plant machinery or hydraulic service repair shop can make you one up with sealed metal bends or sell you a bit of tube.
I had a pipe made up with metal end fittings, 12 quid....and they pressure tested it.