ADVrider

Go Back   ADVrider > Bikes > Orange Crush > Ridiculous streetbikes with 6 CPUs and too much horsepower (1050/1190/1290cc)
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-08-2014, 07:07 PM   #16
mlyamkaw OP
Drill Baby Drill
 
mlyamkaw's Avatar
 
Joined: Jul 2004
Location: Lake Wenatchee, WA
Oddometer: 538
Quote:
Originally Posted by JoeShoreline View Post
I think they used locktite on the splines. Use a puller, or 2 small curved pry bars( with 90 degree bend) from behind and gently rock it back and forth until it starts to move.
That wasn't the problem, I was able to wiggle it right away. It would not clear the groove in the swing arm until I ground down the 2 teeth on the sprocket a bit.
__________________
14 KTM 1190R
09 KTM 300 XC-W
13 Ural Gear Up
14 KTM 500 EXC
mlyamkaw is offline   Reply With Quote
Old 05-09-2014, 03:26 AM   #17
LocuL
Gnarly Infantry
 
LocuL's Avatar
 
Joined: Dec 2006
Location: Denmark - Jutland
Oddometer: 1,241
Without seeing the situation i would NOT recommend cutting a Little on the splines if thats What you´ve done.
__________________
KTM 950(1190) Adv-s, Soon to be Project 1190
KTM 530 EXC-R 08
LocuL is online now   Reply With Quote
Old 05-09-2014, 06:00 AM   #18
mlyamkaw OP
Drill Baby Drill
 
mlyamkaw's Avatar
 
Joined: Jul 2004
Location: Lake Wenatchee, WA
Oddometer: 538
Quote:
Originally Posted by LocuL View Post
Without seeing the situation i would NOT recommend cutting a Little on the splines if thats What you´ve done.
The teeth on the sprocket, not the splines on the drive shaft.
I'm not using that sprocket anymore anyway, but you could still use it.

It's just a clearance issue in getting the sprocket off.
__________________
14 KTM 1190R
09 KTM 300 XC-W
13 Ural Gear Up
14 KTM 500 EXC
mlyamkaw is offline   Reply With Quote
Old 05-09-2014, 06:21 AM   #19
LocuL
Gnarly Infantry
 
LocuL's Avatar
 
Joined: Dec 2006
Location: Denmark - Jutland
Oddometer: 1,241
i´m calm again
__________________
KTM 950(1190) Adv-s, Soon to be Project 1190
KTM 530 EXC-R 08
LocuL is online now   Reply With Quote
Old 07-10-2014, 07:45 PM   #20
kag
Wander Lust
 
kag's Avatar
 
Joined: May 2012
Location: Kansas
Oddometer: 1,374
Getting ready to do this myself.....not much room in there. Anyone figured out a trick yet or just screw with it until it come off?

I know the area on the right near the pivot shaft is going to suck but was the chain guard bar or the area on the left an issue also?

__________________
“Always drink upstream from the herd”

2007 Yamaha TW 200 / 2008 Buell Ulysses
2013 Triumph Tiger 800r / 2014 KTM 1190 EDS
kag is offline   Reply With Quote
Old 07-10-2014, 08:25 PM   #21
mlyamkaw OP
Drill Baby Drill
 
mlyamkaw's Avatar
 
Joined: Jul 2004
Location: Lake Wenatchee, WA
Oddometer: 538
Quote:
Originally Posted by kag View Post
Getting ready to do this myself.....not much room in there. Anyone figured out a trick yet or just screw with it until it come off?

I know the area on the right near the pivot shaft is going to suck but was the chain guard bar or the area on the left an issue also?

I took all that off when I did it. The chain guard, and the clutch stuff. I had to grind the teeth down by the frame for mine to clear, but I think it's a tolerance issue.
__________________
14 KTM 1190R
09 KTM 300 XC-W
13 Ural Gear Up
14 KTM 500 EXC
mlyamkaw is offline   Reply With Quote
Old 07-10-2014, 08:42 PM   #22
kag
Wander Lust
 
kag's Avatar
 
Joined: May 2012
Location: Kansas
Oddometer: 1,374
Quote:
Originally Posted by mlyamkaw View Post
I took all that off when I did it. The chain guard, and the clutch stuff. I had to grind the teeth down by the frame for mine to clear, but I think it's a tolerance issue.
Thats what I figured....any issues with the clutch slave, either going off or back on?
__________________
“Always drink upstream from the herd”

2007 Yamaha TW 200 / 2008 Buell Ulysses
2013 Triumph Tiger 800r / 2014 KTM 1190 EDS
kag is offline   Reply With Quote
Old 07-10-2014, 08:56 PM   #23
Black Hills
Beastly Adventurer
 
Joined: Apr 2011
Location: Western South Dakota
Oddometer: 1,092
Mine came off with a lot of wiggling. I rotated it so the offending part was between teeth and while they still hit it wasn't enough to prevent it from coming off?
Black Hills is offline   Reply With Quote
Old 07-10-2014, 09:58 PM   #24
mlyamkaw OP
Drill Baby Drill
 
mlyamkaw's Avatar
 
Joined: Jul 2004
Location: Lake Wenatchee, WA
Oddometer: 538
Quote:
Originally Posted by kag View Post
Thats what I figured....any issues with the clutch slave, either going off or back on?
No issues with mine. Just remember how it comes apart. Seem to remember several parts, and laying them out in order they came out so I would get them back in correctly.
__________________
14 KTM 1190R
09 KTM 300 XC-W
13 Ural Gear Up
14 KTM 500 EXC
mlyamkaw is offline   Reply With Quote
Old 07-11-2014, 09:31 PM   #25
kag
Wander Lust
 
kag's Avatar
 
Joined: May 2012
Location: Kansas
Oddometer: 1,374
Changed the front sprocket tonight

I appreciate the advice I got. I thought I will detail what I did so that maybe someone else is helped also.


New barely used 16t front sprocket I got from another inmate (Thank you) . Stock photo




First thing I did was remove the plastic guard. Then drank a beer....have to pace yourself. Removed the slave and metal chain guard. Pull the slave off as one piece and just keep it together. Then behind the slave is the metal chain guard then a little plastic spacer type piece, Pull them off. I put the bike in gear and bend the lock wash tab flat then put a socket to the sprocket nut. Lefty loosey.......more beer



Then once the sprocket nut was off I loosed the rear axle and knocked it slight out after I adjusted the chain tension bolt all the way forward. Then tapped the rear tire all the way forward. You need chain slack. Took the chain off the rear and front sprockets.



I tapped the front sprocket to just loosen it up in case there was any rust and there was. I started working it forward as shown in the photo. It was hung up on the pivot shaft area so I put a screwdriver in between the the teeth and slightly put pressure towards the front of the bike and then pulled with my left hand and it popped right off. 2 minutes. 1 minute of that was guzzling beer and looking at it.



There was a bunch of rust on the splines.



So i wire brushed it real quick and then applied a helping of anti-seize to the splines and wiggled the new sprocket on.



Put the washer and nut back on and re-assembled it. Drank another beer

Since I had 2 beers left I knew I wasn't finished. I changed the brake fluids as the current fluids were looking rather dark. Done


__________________
“Always drink upstream from the herd”

2007 Yamaha TW 200 / 2008 Buell Ulysses
2013 Triumph Tiger 800r / 2014 KTM 1190 EDS

kag screwed with this post 07-11-2014 at 09:36 PM
kag is offline   Reply With Quote
Old 07-11-2014, 09:55 PM   #26
CaliBerger
Gnarly Adventurer
 
Joined: May 2011
Oddometer: 362
Nice write up kag
Pictures are really helpful
Also like you kept yourself hydrated through the whole process
Please report back with your impression of the bike with the 16T sprocket
CaliBerger is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 05:56 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014