Edelweiss-Motorsport retrofit " Kraftpaket "

Dear all,

we are about to launch a new product.

It will be a kit of:

Cylinders - Nikasil plated

Pistons - forged

Camshaft - asymmetrical

The output is 80 hp plus / 90 Nm plus

It will fit all 2V R 100 engines.

The perfect squish is first time integrated into a 100 % bolt on solution.

No need to machine the cylinder head !

No need for a twin plug ignition to avoid pinging !

So if you are about to upgrade or repair your engine have a look here for the development and further more innovative new products to come:

https://de-de.facebook.com/edelweissmotorsport

Thanks and best reg.

Dirk

Thanks !

Dirk,

Wie viel?

It is our goal to set a new standard in Quality and performance as well as in the relation to the price.

So it will be below Euro 1.000,00

Best reg.

Dirk

measured at rear wheel or crank?

The output is 80 hp plus / 90 Nm plus

Its a rubber dome!! I'm sure SS will have something to say about this



Seriously though. That's never going to work with a standard ignition is it? Nice idea though and I'll be in the queue if it works.

<iframe src="//www.youtube.com/embed/krD4hdGvGHM?feature=player_detailpage" allowfullscreen="" frameborder="0" height="360" width="640"></iframe>
.

Interesting cast of the combustion chamber, Rob. Is that from the Edelweiss Facebook site? (couldn't load the site, FB is being glacial today)

--Bill

Wanna do-over?

I kinda do, and I'm in better shape than you are at this point in the rebuild resolution stage.

Facebook is for wankers, couldn't you put it on a proper mans site?

Interesting Dirk,
perfect squish? For what heads?
I am saving my pennies for my plan to very soon send you my R80 heads and 1000cc siebenrock upgrade kit for machining- but this looks much more affordable. Would I need some 1000cc heads to go with it?

And before the inevitable, can we please try to keep this thread on topic and without the usual BS that floods every other thread like this?

thinking one of these kits would be good on the race bike.
I have 2 Facebook accounts

I think that they have a rear wheel dyne.........

Im not quite sure what changes if any went into BMW head shapes, so I would guess it will be for all 1000cc models....but there were some inlet exhaust valve diameter changes along the way so maybe not.

I'm sure it will produce 5BHP more if fitted with a 336 cam

If the price is €1000, then that's a good price, most of the Seibenrock kits cost €800-900 and the SB assyemtrical cam cost near on €300.

yes it is Bill.

You're a member then?

X

Rob , not actively, but one of my daughters is , and her kids are too, so I try to access their accounts.

My other daughter rides a Guzzi Cali 2-----.

Very nice! Cool bike!