|11-09-2007, 06:47 PM||#1|
Joined: Aug 2007
Location: Perth, Western Australia
KTM wiring loom connector blocks
I want to connect different model electrical equipment (switch blocks, start pushbutton, kill switch, indicator switch, etc from the EXC range) onto my 640 Adventure but the electrical connection blocks are different. Can you buy the electrical connector blocks that the KTM factory uses on the 640 Adventure as a kit for making up yourself?
I don't want to butcher the standard kit, as I want everything I take off put in a box for safe storage for when the bike retires to general adventure touring use in a couple of years. I would also rather not splice in second connector blocks into the main wiring loom to bypass the standard connectors.
An alternative for me would be to buy all the standard 640 Adventure bits from a "parted out" one and snip and solder here and there, but that seems like a PITA and possibly more expensive and potentially less reliable.
JayBo on Safari/Dakar
#101 Dakar 2015, Kiwi Safari Team, Perth, WA
KTM 450 Rally ... Dakar ready
KTM 530 EXC-R
Cagiva 750 Elefant - Lucky Explorer '88
|Thread Tools||Search this Thread|