|03-07-2009, 06:02 AM||#1|
Joined: May 2008
KTM 690E Acerbis Handguards
I got the Multiplo (with swivel mount) for the 690 in the end. Apart from the fiddly plastics I am very pleased - I got both the enduro and touring plastics, when assembled both look good for the different purposes. The guards fit well..without any swinging in the vice required..and I like the cut outs for your hands.
pics here.. http://picasaweb.google.co.uk/dpeward/Handguards
This is what Acerbis said..
The swivel mounts should be good for a couple years. We have a new mount that will replace the std mounts eventually. But for now we will continue to have all three for a while. I would say the actual bark buster is stronger because it is anodized and heat treated .. Then with the metal plate in front of the plastic shield makes it reinforced and stronger. If/when you need to replace the shields and metal plates the new RAM or older Multiconcept will work on there and bolt right up. I like the Multiplo’s the problem we had was the retail was too high so they never really sold.
All of our top of the line Rally Pro, Rally 2, Multiconcept, Multiplo, Supermoto……..all those will work and it sounds like you have a tapered style bar like we have on some motocross bikes. So you would get the Pro Taper mount kit, and it will work perfect. I read on a Forum a couple guys like our Supermoto handguard just because it goes around the clutch perch and brake perch better that most handguards.
http://www.ktmtwins.com/950adventure/06350489.html we also carry them in white.
|Thread Tools||Search this Thread|