Hi I have a 2007 R12S now. It does have ABS but not Servo. Can I bleed the brakes like normal without the bleeder funnel (which i have). Or is there some other special way to do this? Also, I'm going to lube my splines and flush the final drive. any tips on how to do this without a center stand? I doing the service with my Trusty Jim Von Boden JVB maintenance CD i bought for my GS back in the day. Thank you, Choppastyle
No funnel needed, just normal old school bleeding. You could use a jack under the engine/trans to lift the rear for spline lube/final servicing, etc. Mike
Thanks Mike. I'm going to get cracking today. I'm at the point where I can do the..........: final drive oil transmission oil engine oil brake bleed belt air filter spark plugs valve adjustment ..........in a few hours. Can't believe I paid over $800 at one point in time to BMW when I can do it myself for less than $150 same day. Choppastyle
Here is the process: http://www.jimvonbaden.com/R1200_2007+_Brake_Bleed.html No, no funnel needed, but use the information about the calipers and pads from the DVD.
