Installed MachineartMoto Hexhead covers and a 10 mm longer Hammerhead designs shift lever for my big ass foot. Sorry for the lousy phone pics!
Awaiting what the payout will be. Now to the soapbox........... What I really want is a 400lb 1000cc shaft drive V-engine GS type bike with offroad bike plastic material bodywork, but no one builds one of those. I'm tired of my 500+lb bikes getting destroyed when they hit the ground. Mainly it's the metal frames and plastic bodywork getting wasted. My DRZ400 has been crashed at least 50 times in more ways than I care to remember and never had nothing more than a broken turnsignal lens all due to the bike being light weight with flexable plastic all on a strong frame.
Hi,.. I wanted to post some more pictures for anyone intereted in making a GPS mount. They can be adapted for any bike. I put mine on my 99 GS. We are going to fabricate a bunch of them and sell them to help raise funds for the Manuelito Children's Home in NM. .. www.lostforareason.com , I looked into getting them eched with a logo and I think if we can do it and be competitive,.. it will be great to comemmorate and raise funds for the kids ! hopefully this link takes you to the pictures of fabrication. https://lh3.googleusercontent.com/-...p1TUKa0xQWA/w497-h373/IMG_20121206_212840.jpghttps://lh5.googleusercontent.com/-.../Bry9oL_Wr0A/s100-p-k/IMG_20121206_223616.jpg ...SORRY ! , I was trying to link to ALL the pics !... I posted about 60 on google+ under " Ron Grace" ,..If anyone wants,..e-mail me at mudisyourfriend@gmail.com for pics.
Not just today, but I installed Rox risers, Touratech skid plate, oil cooler guard, GPS mount ADVdesigns lower engine guards and highway pegs, RKA tankbag and ADVgear toolbox (this thing is cool) Sargent low seat, And, I don't even have 1000 miles on it yet !
look at : http://youtu.be/vH6WxyDN-Zc , that should be my attempt at a how to on a homemade GPS holder. I will stay out of Hollywood, don't worry. I had a lot of inquiries about it so I thought I'd put it up there.