Ktm 950 Adv tool kit part missing

My kit never came with the bottle opener shaped wrench

so far not found use for it just curious whats it is for and is there a replacement for it?

the bottle opener tool closed end works on the oil drain bolt on both my 690 Duke and 250sx and 250sxf, it fits the drain bolt good its just not long enough to really put force on it to take bolts off sometimes. i have used mine several times.

and the other end for anything specific or is it actually a bottle opener

torque wrench extension for the cylinder studs.



but mostly....a bottle opener.

laters,

laramie

Shouldn't that be at a 90 degree angle to get an accurate reading?

What's wrong with it just being a bottle opener? In fact to be honest, it doesn't do that quite right either. It's not got a good hard edge so you're not really missing out. I always wear rings (have one with a bottle opener shape which works brilliantly, but any ring will do when you get the hang of it) for among other things that purpose so I don't really need mine. If it wasn't such a hassle you could pick up mine

ah well ill grab a socket, grind it down to make a oil sump socket for the tool kit

cheers

must make up cyl head nut adaptor at some point but all my nuts are good and tight

cheers lads