Iphone 4 and Zumo 550

Snowfreak · 01-05-2011, 08:10 PM

Before I upgraded my 3GS would make and receive calls with no issues with the unit. With the iPhone4, when the call comes in, it shows up on the gps but with no audio indication and I can't answer it now.

Anyone having similar issues but more importantly is there a fix for it.

lhendrik · 01-06-2011, 11:05 AM

My iPhone 4 connects and works with my Zumo 550 no problems. I suggest you reset both devices and re-pair if you haven't already tried.

JohnnyK · 05-28-2011, 05:53 PM

When you use the iPhone4 with th Zumo 550 does the phone directory display on the Zumo?

John

lhendrik · 05-31-2011, 03:44 AM

Yes

andrswal · 07-11-2011, 11:39 AM

My old 3gs worked fine with the Zumo 550 but the iphone 4 wont, the Zumo sees it but wont communicate with it, if I dial on the Zumo the phone doesnt get it and the zumo rolls back into its normal screen, the other way no sound etc from the Zumo

neerbeer · 06-13-2012, 10:33 AM

I'm having similar issue. my iphone 4 syncs with the 550 and I can dial and place the call on the zumo. I hear the phone ringing in my helmet (Starcom1 Advanced) but as soon as the phone is answered on the other end the phone call is dropped by the zumo but the call is still going on to the phone alone. I can talk and hear it through the iphone only at that point. I'm running the current and most up to date firmware on both the 550 and iphone 4.

Any suggestions?
Thanks Brian

bkh · 06-29-2012, 08:05 AM

Everytime I pair my iPhone 4s with my Zumo 550, it works initially and then the next time I power up the zumo, I get a message indicating that the bluetooth firmware is updating on the zumo. When it's finished, I have to repair the phone and of course, the next time it powers up I go through same cycle.

Anyone seen this before?

navi · 08-07-2012, 10:14 PM

And sometimes, when I try to dial, as soon as i press CALL, the Zumo goes back to the main screen, Zumo says (symbols) that he Headset and the Phone are connected. But from the on nothing works, and I get no audio to the headset at all. The only fix at this point is to re-boot the 550

I called Garmin today, I checked my software to make sure it had the latest version, Check. But that was really all that was politely offered.

Im going to clear out the pairing and try again tomorrow, but I don't have high hopes at this point

01-05-2011, 08:10 PM	#1
Snowfreak ^OP Beastly Adventurer Joined: May 2006 Location: NE Pa Oddometer: 1,589	Iphone 4 and Zumo 550 Before I upgraded my 3GS would make and receive calls with no issues with the unit. With the iPhone4, when the call comes in, it shows up on the gps but with no audio indication and I can't answer it now. Anyone having similar issues but more importantly is there a fix for it. __________________ 2009 R1200 GSA 2002 Dyna Glide (For Sale) Motorcycles must be very big and loud and chromed, and must bark and smoke, and you only ride them on Sundays--Dear God that's not what a motorcycle is!!! Erik Buell

01-06-2011, 11:05 AM	#2
lhendrik Truffle Rustler Joined: Dec 2008 Location: New York and Floridoodie Oddometer: 1,947	My iPhone 4 connects and works with my Zumo 550 no problems. I suggest you reset both devices and re-pair if you haven't already tried. __________________ Normal is just a setting on the dryer. Armageddon was yesterday - Today we have a serious problem. 2009 R1200GS Adventure 2008 K1200GT

05-31-2011, 03:44 AM	#4
lhendrik Truffle Rustler Joined: Dec 2008 Location: New York and Floridoodie Oddometer: 1,947	Yes __________________ Normal is just a setting on the dryer. Armageddon was yesterday - Today we have a serious problem. 2009 R1200GS Adventure 2008 K1200GT

07-11-2011, 11:39 AM	#5
andrswal n00b Joined: Jul 2011 Location: Ipswich, England Oddometer: 1	iphone 4 & Zumo 550 My old 3gs worked fine with the Zumo 550 but the iphone 4 wont, the Zumo sees it but wont communicate with it, if I dial on the Zumo the phone doesnt get it and the zumo rolls back into its normal screen, the other way no sound etc from the Zumo

06-13-2012, 10:33 AM	#6
neerbeer Adventurer Joined: May 2011 Location: O'Fallon, MO Oddometer: 13	Similar Issue I'm having similar issue. my iphone 4 syncs with the 550 and I can dial and place the call on the zumo. I hear the phone ringing in my helmet (Starcom1 Advanced) but as soon as the phone is answered on the other end the phone call is dropped by the zumo but the call is still going on to the phone alone. I can talk and hear it through the iphone only at that point. I'm running the current and most up to date firmware on both the 550 and iphone 4. Any suggestions? Thanks Brian

05-28-2011, 05:53 PM	#3
JohnnyK Adventurer Joined: Dec 2007 Oddometer: 17	When you use the iPhone4 with th Zumo 550 does the phone directory display on the Zumo? John

06-29-2012, 08:05 AM	#7
bkh n00b Joined: May 2005 Oddometer: 1	Everytime I pair my iPhone 4s with my Zumo 550, it works initially and then the next time I power up the zumo, I get a message indicating that the bluetooth firmware is updating on the zumo. When it's finished, I have to repair the phone and of course, the next time it powers up I go through same cycle. Anyone seen this before?

08-07-2012, 10:14 PM	#8
navi Gnarly Adventurer Joined: Mar 2003 Location: lower main land, canada Oddometer: 350	i have sent this ! And sometimes, when I try to dial, as soon as i press CALL, the Zumo goes back to the main screen, Zumo says (symbols) that he Headset and the Phone are connected. But from the on nothing works, and I get no audio to the headset at all. The only fix at this point is to re-boot the 550 I called Garmin today, I checked my software to make sure it had the latest version, Check. But that was really all that was politely offered. Im going to clear out the pairing and try again tomorrow, but I don't have high hopes at this point

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: