ADVrider

Go Back   ADVrider > Gear > Vendors
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 02-27-2013, 01:48 AM   #1
gefr OP
Life is a trip
 
gefr's Avatar
 
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,883
Base plate for KTM 990 ITG foam air filter.

Aluminum base plate cut with laser for KTM 990 ITG Superflow foam air filter. Matches with ITG JC30/65 and JC30/80 model.

Cost will be 45€, shipping is free.
It can take up to 22 days to reach buyers, though it usually reaches USA in 10 days.

Upper side:


Lower side:


Plates without the breather hole and/or without temp sensor are now available, you just need to ask them specifically.


I can also include blanking plates with another 5€.

DZUS half turn clips and sealing flanges for throttle bodies are included. Sealing flanges should be fitted under the base plate.

Foam filters are not included. You can find a local distributor here:

http://www.itgairfilters.com/megaflow-introduction.asp

one shop option:
http://www.patrickmotorsports.com/part/ ... w-jc30-80/

gefr screwed with this post 01-05-2015 at 01:55 PM
gefr is offline   Reply With Quote
Old 05-07-2013, 03:07 AM   #2
rossguzzi
990 Adv.
 
rossguzzi's Avatar
 
Joined: Oct 2012
Location: Bottom left hand side of OZ
Oddometer: 940
Do they fit in the airbox? Or would I put the lid of the airbox back on?
rossguzzi is offline   Reply With Quote
Old 05-07-2013, 03:11 AM   #3
gefr OP
Life is a trip
 
gefr's Avatar
 
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,883
No they replace the whole airbox completely.

The base plate sits on the throttle bodies. Τhe foam filter attaches on the base plate.
Cheers.

gefr screwed with this post 07-13-2013 at 01:09 PM
gefr is offline   Reply With Quote
Old 05-07-2013, 12:26 PM   #4
LocuL
Gnarly Infantry
 
LocuL's Avatar
 
Joined: Dec 2006
Location: Denmark - Jutland
Oddometer: 1,274
Could/would you make any for the RC8.
__________________
KTM 950(1190) Adv-s, Soon to be Project 1190
KTM 530 EXC-R 08
LocuL is offline   Reply With Quote
Old 05-07-2013, 12:36 PM   #5
gefr OP
Life is a trip
 
gefr's Avatar
 
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,883
Mmm interesting thought.

It will take a while though... let me put this into perspective...

gefr screwed with this post 07-13-2013 at 01:09 PM
gefr is offline   Reply With Quote
Old 06-04-2013, 05:29 AM   #6
alongat
Beastly Adventurer
 
alongat's Avatar
 
Joined: Jan 2010
Location: Toronto, Canada
Oddometer: 1,058
GEFR, I want one of these for my 990ADV - how do I place an order with you? If you prefer, feel free to email me offline at alongat.gat@gmail.com

Thank you
__________________
Toronto, Canada
KTM 1190 ADV, KTM 530 EXC
Gone: Ducati 999R, KTM 530EXC, KTM 990ADV-R, KTM 950ADV, KTM 690, KTM 640ADV, kTM RC8R, Ducati 996S, Yamaha R1
And how can this be? For he is the Kwisatz Haderach!
alongat is offline   Reply With Quote
Old 12-31-2014, 12:37 AM   #7
slowfast
n00b
 
Joined: Mar 2014
Location: South West UK
Oddometer: 2
KTM 950 base plate.

Hi,
I saw this thread and wanted to know whether you are still making these plates and if you are how much is one to the UK?
slowfast is offline   Reply With Quote
Old 12-31-2014, 01:06 AM   #8
gefr OP
Life is a trip
 
gefr's Avatar
 
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,883
Yes I am.

As a matter of fact I recently received an order. I also have some with no breather hole and a few without sensor holes and without breather holes.
Shipping is included.
Have a Happy New Year.

gefr screwed with this post 01-18-2015 at 12:29 PM
gefr is offline   Reply With Quote
Old 01-18-2015, 08:29 AM   #9
Peat
n00b
 
Joined: Mar 2011
Oddometer: 4
Fitted mine over the weekend, had to soak the foam rings in hot water as tight fit but nice work, Akro mapping, with my fmf cans she's a beast now, what a roar!!! Might have to put the spark arresters back to quieten her down.

Thanks again
Peat is offline   Reply With Quote
Old 01-18-2015, 12:33 PM   #10
gefr OP
Life is a trip
 
gefr's Avatar
 
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,883
Quote:
Originally Posted by Peat View Post
Fitted mine over the weekend, had to soak the foam rings in hot water as tight fit
Thanks again
Could you please explain, concerning the foam rings? Is this a procedure that makes the foam tight?
Happy you liked the results.
Cheers
gefr is offline   Reply With Quote
Old 01-20-2015, 01:44 PM   #11
Peat
n00b
 
Joined: Mar 2011
Oddometer: 4
I couldn't get the base plate to fit as the foam rings were a Really tight fit, I soaked them in hot water to make them a little softer to allow figment of all the parts
, when they cooled down they returned to their original size and thus a nice tight fit😀
Peat is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 08:59 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014