Husqvarna TE/SM-610 Index Thread - Page 5

rwamf · 01-18-2007, 09:44 AM

Quote:

Originally Posted by Fred

It says it meets all bla bla bla bla ........80db. It's a LaFranconi too. Reminds me of my Moto Guzzi

Yeah my 06 was stamped 80db also but it measured 97db at a sound test, My sons TE 250 and my buddies 06 510 with the stock pipes are much quieter than my 610 was with the stocker. My Leo Vince with the Yosh quiet core measures 96db , It sounds very nice but I would like to drop the db down a bit more.
Thanks

Fred · 01-18-2007, 09:50 AM

Is that the Blue Ribbon Coalition sound test?

They seem to be on the ball when they do theirs. 80db must be at idle

bike_pilot · 01-19-2007, 02:02 PM

HiYa TE610'ers,

Just a small request from your TE250 brother......Does anyone have a lower support mount for the rear rack that you care to part with? It's the one that the rack bolts up to under the rear fender. Can't seem to find one at the dealerships. If you've got one your not using I'd like to discuss it with you.

Got lots of junk to carry!

Ruffus · 01-19-2007, 02:42 PM

Quote:

Originally Posted by bike_pilot

HiYa TE610'ers,

Just a small request from your TE250 brother......Does anyone have a lower support mount for the rear rack that you care to part with? It's the one that the rack bolts up to under the rear fender. Can't seem to find one at the dealerships. If you've got one your not using I'd like to discuss it with you.

Got lots of junk to carry!

+1

need one too

bike_pilot · 02-16-2007, 07:10 PM

Quote:

Originally Posted by bike_pilot

HiYa TE610'ers,

Just a small request from your TE250 brother......Does anyone have a lower support mount for the rear rack that you care to part with? It's the one that the rack bolts up to under the rear fender. Can't seem to find one at the dealerships. If you've got one your not using I'd like to discuss it with you.

Got lots of junk to carry!

Nevermind, made my own!

newcastlebrown · 02-16-2007, 10:02 PM

Quote:

Originally Posted by bike_pilot

Nevermind, made my own!

Anyone who knocks out a clean piece like that AND quotes Mr. McQueen gets props from me.

Nice work

nsx · 02-22-2007, 05:53 AM

Quote:

Originally Posted by rwamf

... My Leo Vince with the Yosh quiet core measures 96db , It sounds very nice but I would like to drop the db down a bit more.
Thanks

My '06 had a full Leo Vince when I bought it. I put the stock system back on and was very surprised that it wasn't much quieter. If you find a quieter system, I would like to buy your current one. Maybe I should look for a Yosh quiet core for mine.

husky123 · 02-22-2007, 06:33 AM

Quote:

Originally Posted by newcastlebrown

Anyone who knocks out a clean piece like that AND quotes Mr. McQueen gets props from me.

Nice work

You got that right! I put some gas in your tank!

Oh yeah....wrong forum

tshelver · 02-23-2007, 06:40 AM

Talking about mods: mud season is coming and I need a bigger tank.

Any news on progress with the IMS 4 / 5 / ??? gallon tank?

sTE610vE · 02-25-2007, 07:15 PM

For those Husky's with the dellorto carb here is a great resource. Or if you just want to learn how a carb works this is a very good manual...

http://web.tiscali.it/abosco/moto/ca.../dellorto.html

flan8tive · 03-22-2007, 06:05 AM

The slots were snapped as one of the POs had stuck a screwdriver in them without loosening the nuts...

They came from R&D Husky in Oz and they were $pendy.

I have the new ones....searched this thread for tech advice on doing the change...anybody care to point me to a reference?

TIA

nsx · 03-24-2007, 05:01 AM

After much nagging, Nate (sales@dirttricks.com) has agreed to make a 43t sprocket for me. Contact him if you want one. He normally only makes 45 and 46. He's also working on countershaft sprockets.

Robert

ThatGuyEd · 04-20-2007, 11:35 AM

Just got a 2007 TE 610 the other day, still in the crate....In mid-assembly right now..

Question for you owners:

I'm having a problem mounting the front Left Hand side fairing that mounts to the gas tank and to the radiator. It sits right in front of the big "Husqvarna" stickered tank fairing... Anyways, this piece mounts to the gas tank fine, but when I try to bolt it onto the radiator, I have something like a 1" gap between the radiator mount and the fairing.....

I'm thinking maybe the gas-tank is mounted improperly, but this is the way it came from the factory....

The 1 inch gap is on the arrow.

buffallodan · 04-20-2007, 02:48 PM

Quote:

Originally Posted by ThatGuyEd

Just got a 2007 TE 610 the other day, still in the crate....In mid-assembly right now..

Question for you owners:

I'm having a problem mounting the front Left Hand side fairing that mounts to the gas tank and to the radiator. It sits right in front of the big "Husqvarna" stickered tank fairing... Anyways, this piece mounts to the gas tank fine, but when I try to bolt it onto the radiator, I have something like a 1" gap between the radiator mount and the fairing.....

I'm thinking maybe the gas-tank is mounted improperly, but this is the way it came from the factory....

The 1 inch gap is on the arrow.

After crushing my radiator a bit I needed to use a longer bolt to reach the radiator. When I install the new 5 gallon tank the lower shroud won't be used however...maybe its time for you to get a new tank

Dan

ThatGuyEd · 04-20-2007, 08:45 PM

This thing is brand new from the factory. I think the rads are in the right spot....its more the gas tank, I think.

01-19-2007, 02:02 PM	#63
bike_pilot Gnarly Adventurer Joined: Apr 2006 Oddometer: 103	HiYa TE610'ers, Just a small request from your TE250 brother......Does anyone have a lower support mount for the rear rack that you care to part with? It's the one that the rack bolts up to under the rear fender. Can't seem to find one at the dealerships. If you've got one your not using I'd like to discuss it with you. Got lots of junk to carry! __________________ 06 TE250 Plated, 05 CRF50, 03 DR-Z125L 02 XR80, 04 RM125, '76 WR250 "I suppose that's the great romantic lure of the motorcycle; it's a key to adventure" - Steve McQueen

02-23-2007, 06:40 AM	#69
tshelver Gnarly Adventurer Joined: Apr 2005 Location: Beween here (SE Asia) and there (NH/VT) Oddometer: 476	Talking about mods: mud season is coming and I need a bigger tank. Any news on progress with the IMS 4 / 5 / ??? gallon tank? __________________ '11 Yamaha YBR125G (cheap and very cheerful '12 Zongshen Fly / Motorstar MSX200-II (biggest-fun-to-dollar ratio of any bike I've owned) '03 Honda VFR800 (sold) '06 Husky TE610 (gone)

02-25-2007, 07:15 PM	#70
sTE610vE Beastly Adventurer Joined: Jul 2005 Location: Kansas Oddometer: 1,664	DellOrto Carb Manual For those Husky's with the dellorto carb here is a great resource. Or if you just want to learn how a carb works this is a very good manual... http://web.tiscali.it/abosco/moto/ca.../dellorto.html __________________ TRAIL STAND (advrider thread)- Dual Sport Portable Jack Stand *www.endurostar.com* Husqvarna TE630 Husqvarna TE610E (for sale) Cagiva Gran Canyon

03-22-2007, 06:05 AM	#71
flan8tive Flea Tibet! Joined: Oct 2006 Location: Center of the Humidiverse Oddometer: 2,186	Fork Valve Adjuster Screws The slots were snapped as one of the POs had stuck a screwdriver in them without loosening the nuts... They came from R&D Husky in Oz and they were $pendy. I have the new ones....searched this thread for tech advice on doing the change...anybody care to point me to a reference? TIA __________________ 07 950SE Sold. Not Forgotten... 07 TE510 Sold. 80 Z50R

03-24-2007, 05:01 AM	#72
nsx Adventurer Joined: Nov 2006 Location: Oak Ridge, TN Oddometer: 76	Ironman sprocket After much nagging, Nate (sales@dirttricks.com) has agreed to make a 43t sprocket for me. Contact him if you want one. He normally only makes 45 and 46. He's also working on countershaft sprockets. Robert

01-18-2007, 09:50 AM	#62
Fred Banned Joined: Feb 2003 Location: under my fallen bike Oddometer: 1,051	Is that the Blue Ribbon Coalition sound test? They seem to be on the ball when they do theirs. 80db must be at idle

04-20-2007, 11:35 AM	#73
ThatGuyEd Mud Lover Joined: Jan 2006 Location: Alberta Canada Oddometer: 591	Problemo Just got a 2007 TE 610 the other day, still in the crate....In mid-assembly right now.. Question for you owners: I'm having a problem mounting the front Left Hand side fairing that mounts to the gas tank and to the radiator. It sits right in front of the big "Husqvarna" stickered tank fairing... Anyways, this piece mounts to the gas tank fine, but when I try to bolt it onto the radiator, I have something like a 1" gap between the radiator mount and the fairing..... I'm thinking maybe the gas-tank is mounted improperly, but this is the way it came from the factory.... The 1 inch gap is on the arrow.

04-20-2007, 08:45 PM	#75
ThatGuyEd Mud Lover Joined: Jan 2006 Location: Alberta Canada Oddometer: 591	This thing is brand new from the factory. I think the rads are in the right spot....its more the gas tank, I think.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode