KLR650:Increasing Wattage Output

Bigger Al · 07-28-2007, 09:31 PM

Hey guys,
I've been reading up on the KLR charging system and how I can make my '95 put out more watts. The Electrosport products are at best unreliable, and I'm not planning to use them any time soon. I've been digging into parts diagrams, and I show that the flywheel/generator rotor is different on the post-'95 models, and that the listed output of the charging system is 3 amps higher. My question is this: can I just install a used rotor from a '96-on bike and get the extra amps, or is it more involved than that?
Thanks in advance!

07-28-2007, 09:31 PM	#1
Bigger Al ^OP Still a stupid tire guy Joined: Oct 2004 Location: Auburn, CA Oddometer: 7,272	KLR650:Increasing Wattage Output Hey guys, I've been reading up on the KLR charging system and how I can make my '95 put out more watts. The Electrosport products are at best unreliable, and I'm not planning to use them any time soon. I've been digging into parts diagrams, and I show that the flywheel/generator rotor is different on the post-'95 models, and that the listed output of the charging system is 3 amps higher. My question is this: can I just install a used rotor from a '96-on bike and get the extra amps, or is it more involved than that? Thanks in advance! __________________ "Nearly all men can stand adversity, but if you want to test a man's character, give him power." - Abraham Lincoln

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode