TuneBoy Software for the '06 990 ADV (in Aus)

KTMSprocket · 10-18-2007, 10:42 PM

Has anybody:

Bought this software?
Used it in on the 990?
Successfully and permanantly cured the off idle throttle snatchiness?

If you have I'd love to know the results and your experience / knowledge of efi and engine management. eg. i am a novice.

J

minusone · 10-21-2007, 06:08 PM

They are based in Sydney and as yet do not have a map for the 990.
They wanted to use my 06 990 and offered a free product if I gave them my bike to test.

I could not afford the time off on a weekday to dyno at Parammatta.

You could be the first if you call them.
------------------------

Since doing - wings cans/lower gearing/G2 throttle cam/Akro remap I am not bothered with doing it now.

ratmunch · 10-27-2007, 03:26 PM

Wayne Mcdonalds software is genius. The basic idea is to reflash your ECU or bikes computer. I have been using it on my Triumph with utter fantastic results. assuming the KTM software is the same, you can check all diagnostics, change any part of any fueling, ignition range. You can tune it for performance or for economy. For KTM's you'd probably have to get some dyno time and custom make your own tunes because I haven't seen to many posts on any forum mentioning tuning a 950 or 990, but it would probably fix any of the factory EPA issues built into the factory settings, ie stalling or idling issues. If only I was offered the chance to have free tuning done by Wayne, holy crap a once in a lifetime.

10-18-2007, 10:42 PM	#1
KTMSprocket ^OP Wannabe Adventure Rider Joined: Jun 2006 Location: NSW Oddometer: 890	TuneBoy Software for the '06 990 ADV (in Aus) Has anybody: Bought this software? Used it in on the 990? Successfully and permanantly cured the off idle throttle snatchiness? If you have I'd love to know the results and your experience / knowledge of efi and engine management. eg. i am a novice. J

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-21-2007, 06:08 PM	#2
minusone Beastly Adventurer Joined: Nov 2005 Location: Northern Beaches Sydney Australia Oddometer: 1,230	They are based in Sydney and as yet do not have a map for the 990. They wanted to use my 06 990 and offered a free product if I gave them my bike to test. I could not afford the time off on a weekday to dyno at Parammatta. You could be the first if you call them. ------------------------ Since doing - wings cans/lower gearing/G2 throttle cam/Akro remap I am not bothered with doing it now.

10-27-2007, 03:26 PM	#3
ratmunch jackass extraordinaire Joined: Nov 2006 Location: epicenter of hell Oddometer: 98	Wayne Mcdonalds software is genius. The basic idea is to reflash your ECU or bikes computer. I have been using it on my Triumph with utter fantastic results. assuming the KTM software is the same, you can check all diagnostics, change any part of any fueling, ignition range. You can tune it for performance or for economy. For KTM's you'd probably have to get some dyno time and custom make your own tunes because I haven't seen to many posts on any forum mentioning tuning a 950 or 990, but it would probably fix any of the factory EPA issues built into the factory settings, ie stalling or idling issues. If only I was offered the chance to have free tuning done by Wayne, holy crap a once in a lifetime.