Transfer question

tibejara · 10-19-2007, 08:27 AM

How do I transfer tracks from my GPS to computer program in order to show ELAPSED TIME and AVG. SPEED in track peroperties
Is there a special instruction for the GPS or the program?
Thanks in advance for your help

markie_wales · 10-25-2007, 07:08 AM

Quote:

Originally Posted by tibejara

How do I transfer tracks from my GPS to computer program in order to show ELAPSED TIME and AVG. SPEED in track peroperties
Is there a special instruction for the GPS or the program?
Thanks in advance for your help

Going to need more info liek what make / model of GPS are you using, what PC software etc?

If it's a Garmin and MApsource then:

- switch on and connect GPSR to PC
- start Mapsource
- "Transfer" then "Receive from device"
- tick "Tracks"
- click "Receive"

once compeleted go to the "Tracks" tab on the RHS of Mapsource and right click the track you are interested in. Then select "Track Properties" - that will give avg speed and elapsed time.

cheers

MArkie

Frank Warner · 10-25-2007, 06:44 PM

Think that information is striped out when youy save the track. It is avalible when it is in 'active track'.

10-19-2007, 08:27 AM	#1
tibejara ^OP Adventurer Joined: Nov 2004 Location: Colombia. motorcycle paradise Oddometer: 49	Transfer question How do I transfer tracks from my GPS to computer program in order to show ELAPSED TIME and AVG. SPEED in track peroperties Is there a special instruction for the GPS or the program? Thanks in advance for your help __________________ Tiberio Medellín, Colombia

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10-25-2007, 06:44 PM	#3
Frank Warner Traveller Joined: Mar 2002 Location: Sydney, Australia Oddometer: 6,593	Think that information is striped out when youy save the track. It is avalible when it is in 'active track'.