Adventure in Ohio?

[Danjal]

Originally Posted by mgorman

Anyone have a stock carb laying around for a DRZ400s?

Mikuni BSR36 CV Carb IIRC. Nope,I do have a BST40 if it's needed. I assume you need settings?

[alansz400]

Originally Posted by Gonzo_Matt

yeah, I'm shopping around for a programmer. I bought heated grips for the 650 and the WRR today, think I'm going to get some heated gear tomorrow, so I'm burning this weeks bike budget up pretty quick. Luckily Oceanbum's buddy is buying my lil KLR on friday.

I bought this one last oct. for the R. http://electronicjetkit.com/default.asp some guy had them new in the box on ebay for $100. I need to find a deal like that again. Let me know if you find a deal.

[mgorman]

Originally Posted by Danjal

Mikuni BSR36 CV Carb IIRC. Nope,I do have a BST40 if it's needed. I assume you need settings?

No, I broke a tab the retains the jet needle in place. If it were my bike, I'd rig it but it isn't so I need to get a new slide.

[MeefZah]

Originally Posted by Gonzo_Matt

Any of you WRR guys done any of the airbox modifications? I'm about 100 pages deep in the megathread, and have seen a few references to doing stuff with the snorkel and flapper.

I didn't notice any real difference, although there is less shit to go wrong without that stuff.

[Benly]

Originally Posted by Gonzo_Matt

I'm contemplating removing the AIS and EXUP. I have yet to run a Trakmaster, I have a new one in the garage or my little KLR, but never put it on. My WRR had 606's on it and man, those are niiiiice, I can't complain one bit about how they stick to pavement or gravel, and in the slop, they just pull. I'll be running them on this bike until I ride on something better....

I removed the air box flapper components and added an FMF FI programmer. You can find a new programmer online for less than $200 delivered. I think it runs better on the street but haven’t put a whole lot of off road miles on the bike due to weather. I’m leaving the AIS system on as long as I keep the stock exhaust. My thinking is that it might help keep the CAT from plugging up sooner than later, although I’ll probably put on an aftermarket pipe on at some point.

[ruppster]

Any rides going on this weekend?
It's supposed to be 52° down this way Saturday.

[Gonzo_Matt]

I was going to try and ride on Saturday, but looks like i get to spend the day handing drywall...

[The Stew]

Originally Posted by ruppster

Any rides going on this weekend?
It's supposed to be 52° down this way Saturday.

Im seeing a max of 42 low in the 20s in my area.

[buildit]

I decided to ride for a bit today. BRRRrrrrr. Was also surprised by several corners being a little lose even though we don't have the salt build up that usually gives them that feel.

[sion]

Originally Posted by buildit

Was also surprised by several corners being a little lose even though we don't have the salt build up that usually gives them that feel.

Dontcha just love when the ass end steps out on ya unexpectedly while leaned over at 50 mph...instantly jacking up your heartrate by 50%

[buildit]

Originally Posted by sion

Dontcha just love when the ass end steps out on ya unexpectedly while leaned over at 50 mph...instantly jacking up your heartrate by 50%

Nothing that bad today but yeah, been there had that feeling.

[Oceanbum]

[buildit]

Originally Posted by Oceanbum

Looks like an FTD florist moment.

[sion]

Originally Posted by Oceanbum

lol....never had one go that far out on me, but I've had a few of those 6 inch slips that cause intense sphincter-puckering.

only time I ever went down at speed on the road was the deer-strike

[mic_detonator]

Nice meeting you last night gonzo