F 650 GS/Dakar rear rack ext

[ds2199]

Originally Posted by SoOreBeer

I would be interested in getting a rear rack for my 03 Dakar when one becomes available!!!

Cheers

like he said... do you have any plans to make a rear rack for '02-03' Dakars?? If it helps any, I'm in too.

[Hakatan]

Originally Posted by ds2199

like he said... do you have any plans to make a rear rack for '02-03' Dakars?? If it helps any, I'm in too.

You'd never know how many '03 Dakar owners there are on ADV...until Kildala offers a farkle that only fits '05 and later bikes

Hi Rick I'd be in for an '03 Dakar version, too...it would nicely complement my sweet Kildala skid plate

[VA_Nole_Fan]

Count me in for one as well if you can do it.

[Hakatan]

Originally Posted by VA_Nole_Fan

Count me in for one as well if you can do it.

Hey Rick, Va Nole Fan makes 8 ADVers who've posted in this thread hoping you'll make a rear rack extension for pre-05 F650s (Dakar or GS)

The hopefuls, so far:

• jdaniele
• Simple Simon
• Got 2 Moto
• TJ Willy
• SoOreBeer
• ds2199
• Hakatan
• Va Nole Fan

Just sayin'

[SoOreBeer]

Originally Posted by kildala2000

OK,

First of all boyz I am again SOLD out of the rear rack for the 650's. I will be building more in the near future.

OK, older 650's. Here is my problem, I do make an older model and have done so for a little while. The only problem is the mounting to the BMW plastic rack, the people that I've sold the racks to had the Givi mounting plate which worked fine. I do not have a test bike to make any mounting plate. Can someone help me to come up with an idea to mount my rack?
Thanks for your support,
Rick

OK, I've come up with one solution I think might work! Kildala lemme know if I'm off my rocker. If anyone's got any other ideas.....

[cmsgtchet]

Rick, muchas gracias for a GREAT product

Installed my rack in less than ten minutes and entrusted it to transporting my laptop to work this morning. Can't wait to strap on my dry bag for a weekend trip.

[andy29847]

[JDLuke]

Originally Posted by Hakatan

Hey Rick, Va Nole Fan makes 8 ADVers who've posted in this thread hoping you'll make a rear rack extension for pre-05 F650s (Dakar or GS)

The hopefuls, so far:

• jdaniele
• Simple Simon
• Got 2 Moto
• TJ Willy
• SoOreBeer
• ds2199
• Hakatan
• Va Nole Fan

Just sayin'

Make that nine... My brake reservoir guard is getting lonely.

Actually, I'd like mine to be wide enough to offer good support to my large BMW soft tailbag. It kinda droops down at the sides.

[Hakatan]

Originally Posted by kildala2000

PS: for the older 650 gang I will work on building a rear rack support to install my rack on your bikes. At this time I do not have a timeline but will make it a winter project.

Thanks, Rick. We'll be watching for updates.

[HerrFritz]

The F650 with a 15T front sprocket is great off road, but uses more fuel. So I needed an auxiliary system. I put together the Kidala rack extension with a Kolpin Jr. tank system. It takes some surgery on both racks. Moreover, not only can one not weld aluminium to steel, but when the two metals are in contact and wet it can cause a failure due to the chemical reaction between dissimilar metal. In short - its all physics and things will vibrate loose real fast.

I think I have solved the problem by inserting a cork layer between the aluminium and the steel Korbin bracket. I used 1/4 X 3/4 in flathead zink screws - lots of them. I also had to cut out a part of the Kolpin bracket so it would not ride on top of the plastic rear tie down loop on the BMW. But it does work.

The installation I show is "spingy". One can reverse it so the gas can sits over the rack. I solved "springy" by simply running a bungy over the load ( not shown ) and securing the gas tank handle.

[HerrFritz]

Backside of the piece - note cutout and cork spacer. Cork is just automotive gasket sheet.

[HerrFritz]

I wish I was better downloading pictures. But This is what things look like when complete. The yellow is just metal marker pen used by welders to mark the mid line on the project.

I am going to send all my pictures to Rick so he can send them to anyone interested in a similar install. The Kolpin Tank and Bracket costs about $84 US. I bought it at Cabela's in Omaha, not online because I could actually look at the parts before I put out so much cash for this project.

Fritz Sampson

[idea man]

Hey Rick;
Sounds like you had a great holiday. You know,everytime I see one of those blue and white Dakars I think of you and yours. Hope the foot is doing well. (and the rest, of course).
IdeaWife just went out and bought a 2004 F650GS.

Looks like we may be in touch real soon. What does your inventory look like?

I hope all is well where you are. Any snow yet?
Dana

PS: May be coming to visit (a ride-by) next August. Long ways off but the planning has commenced.

[JDLuke]

Originally Posted by kildala2000

Hey Advriders,


I now have master cyl guards in stock, silver and look great.
Asking $40.00 + postage. Fits 650 GS & Dakar.


Please send me your address if you want one.
Thanks for the support,
Rick

I was JUST looking at my rear master cylinder a day or three ago, and not liking the boot wear...

Got any in black?

[JDLuke]

Originally Posted by kildala2000

Only Silver at this time and I know for sure it would look great on your bike!!

Order sent via PM. You're right, silver WILL look good here: