The XR400 Thread - Page 375

oldenuf · 03-03-2013, 03:48 PM

Went to look at a 1999 XR400, to buy. Looked good, but went to kick it through and seemed to be down on compression. I could easily push it through with my hand. Started OK, and idled, did not smoke, and had good power. Thought the compression release might be over adjusted and the owner didn't have any wrenches. Hard to imagine that.

Any thoughts on this or pretty normal? As I recall my XR250R did not kick as easy as this.

Art

GaMtnRider · 03-03-2013, 06:14 PM

Could definitely not turn over my '96 400 by hand, but the compression release is disabled.

G600 · 03-03-2013, 07:32 PM

Quote:

Originally Posted by oldenuf

... but went to kick it through and seemed to be down on compression. I could easily push it through with my hand. ...

Perfectly normal. Super easy bikes to start.

G600 · 03-03-2013, 07:45 PM

Quote:

Originally Posted by sbanks

Haha I've seen, what's the best method? Cut and add tubing or just cut half tubing and add over the bad spot?

I'm no great frame repair expert but I would check the frame material a little up and if OK do the half tubing thing. The frame tubes rust because of the lack of drain holes. Water will sit at the lowest point making the tubing rust at the bottom, from the inside out. The most common place for rust damage (from what I have seen, but remember I am no expert on this) is maybe 10-15 cm away from the spot in your pic.

Basically a good welder/fabricator can decide what is best to do.

fasthands · 03-06-2013, 06:08 AM

Quote:

Originally Posted by krebsatm02

Help! Anyone have an Edelbrock Pumper Carb with a spare 16 or 17 needle? I love the carb but Edelbrock stopped making them and are running out of parts. All they had left was an 18, and with it all the way lean it still runs way too rich. Thanks - Doug

ATV Galaxy have #16 needles but not 17 I got one from their ebay store about a month ago, I'm running an Edelbrock pumper on a XR250R and with all the usual de-restriction mods I am finding the #16 needle spot on.
Hope this helps..

RideFreak · 03-06-2013, 08:05 AM

If anyone is looking for a nice XR400, I'm selling mine. Recently updated and freshened up plus it's tagged

here's the listing.

krebsatm02 · 03-06-2013, 09:03 AM

Quote:

Originally Posted by fasthands

ATV Galaxy have #16 needles but not 17 I got one from their ebay store about a month ago, I'm running an Edelbrock pumper on a XR250R and with all the usual de-restriction mods I am finding the #16 needle spot on.
Hope this helps..

I ransacked our house and found my other needles, the 13e and 17e that originally came with the carb. I guess I can't blame my wife anymore as they were in one of those "special" places I don't lose things... Thanks for the suggestion, I actually bought the carb from that ebay seller many years ago.

I'll change out the needle tomorrow night.

Ed@Ford · 03-06-2013, 09:21 AM

Quote:

Originally Posted by RideFreak

If anyone is looking for a nice XR400, I'm selling mine. Recently updated and freshened up plus it's tagged

here's the listing.

Fine ride, fine ride....too damn far away! Best of luck on the sale

xr400r · 03-06-2013, 10:46 AM

i have a 2002 xr400 for sale that I would deliver to michigan if interested. all stock and a ton of parts to go with it. 3 pistions, hrc cam, high output stator, 4.0 gallon IMS tank, new side panels in package, new rear mx fender in package, all stock plastics, stock tank, new front and rear rotors, new front and rear sprockets, spare chain guide, spare clutch and throttle cables...

I am the original owner and have owned the bike since new bought in may/june of 2003, always well maintained, no smoke, always clean oil and filters, engine has never been apart, never needed it. Runs like new.

I will ship this bike and send photos to anyone with serious interest. Bike is located in NW PA.

DrLewall · 03-06-2013, 03:51 PM

hey guys..any of you have a muffler end/spark arrestor laying around you want to get rid of? It does not need to be perfect and don't really need the spark arrestor..just need the chrome outside cover, like the one pictured here.

XR4EVER · 03-07-2013, 02:54 PM

http://spokane.craigslist.org/for/3568424754.html

If any of you are within driving distance of Spokane, WA, here is a '02 XR4 with 91 miles. I'd love to know what he's asking for it.

RideFreak · 03-07-2013, 04:33 PM

Quote:

Originally Posted by Ed@Ford

Fine ride, fine ride....too damn far away! Best of luck on the sale

Thanks, looks like it sold already.

DrLewall · 03-07-2013, 04:56 PM

Quote:

Originally Posted by XR4EVER

http://spokane.craigslist.org/for/3568424754.html

If any of you are within driving distance of Spokane, WA, here is a '02 XR4 with 91 miles. I'd love to know what he's asking for it.

my younger brother lives there but he's in africa right now and not bloody likely he'd make it home in time to get it before it sells...

XR4EVER · 03-07-2013, 05:25 PM

Quote:

Originally Posted by DrLewall

....before it sells...

It's either not going anywhere or is already sold.... It's been posted since 1-24-13 and the phone # is missing a digit. I emailed him, we'll see if I hear anything back.

DrLewall · 03-07-2013, 06:23 PM

the digit that is missing is a 5 as it is a 502 area code..that is what I suspect..wish he had posed a pic tho

03-03-2013, 03:48 PM	#5611
oldenuf Gnarly Adventurer Joined: Mar 2010 Location: Port Angeles, WA Oddometer: 177	Compression? Went to look at a 1999 XR400, to buy. Looked good, but went to kick it through and seemed to be down on compression. I could easily push it through with my hand. Started OK, and idled, did not smoke, and had good power. Thought the compression release might be over adjusted and the owner didn't have any wrenches. Hard to imagine that. Any thoughts on this or pretty normal? As I recall my XR250R did not kick as easy as this. Art

03-03-2013, 06:14 PM	#5612
GaMtnRider Adventurer Joined: Jan 2012 Location: Dirt Roads Oddometer: 23	Could definitely not turn over my '96 400 by hand, but the compression release is disabled. __________________ '00 Yamaha XT350 '96 Honda XR 400 tagged

03-06-2013, 08:05 AM	#5616
RideFreak Torque Junkie Joined: Apr 2009 Location: County Lockup Oddometer: 3,532	Nice 400 listed If anyone is looking for a nice XR400, I'm selling mine. Recently updated and freshened up plus it's tagged here's the listing. __________________ *Chris* VIDEOS

03-06-2013, 10:46 AM	#5619
xr400r Beastly Adventurer Joined: Jan 2004 Location: riding usa Oddometer: 2,424	2002 xr400 for sale. i have a 2002 xr400 for sale that I would deliver to michigan if interested. all stock and a ton of parts to go with it. 3 pistions, hrc cam, high output stator, 4.0 gallon IMS tank, new side panels in package, new rear mx fender in package, all stock plastics, stock tank, new front and rear rotors, new front and rear sprockets, spare chain guide, spare clutch and throttle cables... I am the original owner and have owned the bike since new bought in may/june of 2003, always well maintained, no smoke, always clean oil and filters, engine has never been apart, never needed it. Runs like new. I will ship this bike and send photos to anyone with serious interest. Bike is located in NW PA.

03-06-2013, 03:51 PM	#5620
DrLewall . Joined: Aug 2008 Location: Drakes Creek, AR Oddometer: 23,769	need muffler end hey guys..any of you have a muffler end/spark arrestor laying around you want to get rid of? It does not need to be perfect and don't really need the spark arrestor..just need the chrome outside cover, like the one pictured here.

03-07-2013, 02:54 PM	#5621
XR4EVER 919 excuses to ride! Joined: Aug 2012 Location: Post Falls, ID Oddometer: 402	http://spokane.craigslist.org/for/3568424754.html If any of you are within driving distance of Spokane, WA, here is a '02 XR4 with 91 miles. I'd love to know what he's asking for it. __________________ He is his own best friend and takes delight in privacy, whereas the man of no virtue or ability is his own worst enemy and is afraid of solitude. -Aristotle '01 Honda XR400, '04 Honda 919

03-07-2013, 06:23 PM	#5625
DrLewall . Joined: Aug 2008 Location: Drakes Creek, AR Oddometer: 23,769	the digit that is missing is a 5 as it is a 502 area code..that is what I suspect..wish he had posed a pic tho

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode