|02-08-2008, 02:13 PM||#1|
Joined: Dec 2006
Location: Denmark - Jutland
Help: Left coolant hose pinched??
After some time of maintaining the 950 i´ve put the engine back in the frame and put it all together except the plastics. I´ve noticed that putting the water hose on to the left side, it gets really flat(pinchd between frame and engine). And i´m worried about it will flow problemfree.
Are there anyone out there who could show me some closeup pics from the left side og the engine. Or anyone know of this...
|02-08-2008, 05:29 PM||#2|
Joined: Nov 2004
Location: masa yee yah tee 59° 14' 9" N / 135° 26' 42" W
I believe that crwmac mentioned this awhile back as a symptom of a bad radiator cap.
From the HOW:
DISCLAIMER: All observations made in this post are mine and based solely on my own anecdotal experiences, and may contain large doses of facetiousness. YMMV, of course. You are "on your own", and I take no responsibility if someone tries anything in this post and gets into trouble with the law, damages their person or property, or goes blind. Take everything you read or hear "anywhere" butt especially on the Web with a large dose of salt.
cpmodem screwed with this post 02-08-2008 at 05:43 PM
|Thread Tools||Search this Thread|