Which High Fender. - Page 2

Taurkon · 06-12-2008, 10:27 AM

Quote:

Originally Posted by bdefen

It's my understanding that the 990 Adv. high-fender conversion is less expensive than the 950 Adv job because the 990 already has the dual brake lines coming from the handlebars/triple tree because of the ABS. So you don't need as many higher-priced components.
bdefen

correct!

Gedjack · 06-18-2008, 10:43 AM

Taukron,
I did'nt see any fork protectors on that list of parts you supplied, what did you do about them ?

Taurkon · 06-18-2008, 11:38 AM

Quote:

Originally Posted by Gedjack

Taukron,
I did'nt see any fork protectors on that list of parts you supplied, what did you do about them ?

There were in the list. Here it is again:

1 4700109400030 FORK PROTECTOR L/S R/S 85SX 03

I just picked up my parts yesterday and will finish fitting the fork protectors tonight. The fender and fork protectors I listed are black btw.

Gedjack · 06-19-2008, 11:04 AM

Thanks for that, any chance of some pics when its fininshed.

Hank.SD · 06-24-2008, 05:53 PM

So is there a DIY option for the 950 that costs less than the $350 from KTMtwins?

My fuggin' low fender cost me two wrecks in sticky clay last weekend, and one near disaster when it broke loose and locked my front tire on a downhill.. shortly after a REALLY steep rocky downhill. I won't ride offroad again until I have one but $350 makes me head spin!

How are the brake lines routed / connected with the KTM conversion kit?

mookymoo · 06-24-2008, 05:58 PM

Quote:

Originally Posted by Frequencydrive

So is there a DIY option for the 950 that costs less than the $350 from KTMtwins?

My fuggin' low fender cost me two wrecks in sticky clay last weekend, and one near disaster when it broke loose and locked my front tire on a downhill.. shortly after a REALLY steep rocky downhill. I won't ride offroad again until I have one but $350 makes me head spin!

How are the brake lines routed / connected with the KTM conversion kit?

The KTM Twins kit is way overpriced. IIRC the same thing was like $70 cheaper from touratech - but the question will always be whether they have it in stock...

Taurkon · 06-25-2008, 06:49 AM

Quote:

Originally Posted by Gedjack

Thanks for that, any chance of some pics when its fininshed.

Absolutely. As soon as it comes out of the shop.

Taurkon · 07-05-2008, 08:49 PM

Here is a pic of the bike after the high fender came in handy...

and a few once it was all cleaned up...

PABiker · 07-06-2008, 08:45 AM

I pieced mine together for $130 including the EXC fender.

cpmodem · 07-06-2008, 11:52 PM

How'bout a parts list, PA

sooner02r1 · 07-07-2008, 01:48 AM

Acerbis Supermoto front fender. Best looking front fender of all time IMO. It's vented in back too...

Taurkon · 07-07-2008, 07:33 AM

Quote:

Originally Posted by cpmodem

How'bout a parts list, PA

http://www.advrider.com/forums/showthread.php?t=296490

cpmodem · 07-07-2008, 08:10 AM

Quote:

Originally Posted by Taurkon

http://www.advrider.com/forums/showthread.php?t=296490

Thanks... lots of different parts lists over there. I'll just pick the one that strikes my fancy.

Taurkon · 07-07-2008, 10:22 AM

Quote:

Originally Posted by cpmodem

Thanks... lots of different parts lists over there. I'll just pick the one that strikes my fancy.

Ok, I had posted on the first page of this thread the following list:

Actually, I think I paid an extra $10 but ordered locally from Blackfoot Motorsports. However, the quote for $120 (a little under I believe) was from here:

www.ktm-parts.com

These are the parts I ordered:

1 7650801000030 KTM 690 Enduro Front Fender Black
1 4700109400030 FORK PROTECTOR L/S R/S 85SX 03
4 59001092050 SPECIAL SCREW M6X12.5 WS=8 .
4 0014060203 HH COLLAR SCREW M6X20 WS=8
4 54808020000 SPACER BUSHING
2 60013025100 - BRAKE HOSE GUIDE FRONT 03
2 60013025050 - RUBBER FOR BRAKE HOSE GUIDE03

Note, this will only work for the 990, and not the 950.

cpmodem · 07-07-2008, 10:28 AM

Yup, I saw that parts list ... for the 990. That's why I was askin' PA what HIS parts list was (950).

06-24-2008, 05:53 PM	#20
Hank.SD Beastly Adventurer Joined: May 2007 Location: Sodak Oddometer: 1,066	So is there a DIY option for the 950 that costs less than the $350 from KTMtwins? My fuggin' low fender cost me two wrecks in sticky clay last weekend, and one near disaster when it broke loose and locked my front tire on a downhill.. shortly after a REALLY steep rocky downhill. I won't ride offroad again until I have one but $350 makes me head spin! How are the brake lines routed / connected with the KTM conversion kit? __________________ http://www.dakotadualsportriders.com

07-06-2008, 08:45 AM	#24
PABiker Anywhere but here Joined: Dec 2006 Location: Pittsburgh Oddometer: 3,671	I pieced mine together for $130 including the EXC fender. __________________ '06 KTM 950 Adventure '12 Suzuki DR650SE '10 Husaberg FE450 Plated PABiker screwed with this post 01-07-2013 at 06:38 PM

07-06-2008, 11:52 PM	#25
cpmodem Orange Caveman Joined: Nov 2004 Location: masa yee yah tee 59° 14' 9" N / 135° 26' 42" W Oddometer: 7,101	How'bout a parts list, PA __________________ -cp DISCLAIMER: All observations made in this post are mine and based solely on my own anecdotal experiences, and may contain large doses of facetiousness. YMMV, of course. You are "on your own", and I take no responsibility if someone tries anything in this post and gets into trouble with the law, damages their person or property, or goes blind. Take everything you read or hear "anywhere" butt especially on the Web with a large dose of salt.

07-07-2008, 01:48 AM	#26
sooner02r1 Wannabe Joined: May 2007 Location: Norman, OK Oddometer: 308	Acerbis Supermoto front fender. Best looking front fender of all time IMO. It's vented in back too... __________________ 2007 V-Strom 1000 2006 DRZ400S 2006 KTM 250 SX-F

07-07-2008, 10:28 AM	#30
cpmodem Orange Caveman Joined: Nov 2004 Location: masa yee yah tee 59° 14' 9" N / 135° 26' 42" W Oddometer: 7,101	Yup, I saw that parts list ... for the 990. That's why I was askin' PA what HIS parts list was (950). __________________ -cp DISCLAIMER: All observations made in this post are mine and based solely on my own anecdotal experiences, and may contain large doses of facetiousness. YMMV, of course. You are "on your own", and I take no responsibility if someone tries anything in this post and gets into trouble with the law, damages their person or property, or goes blind. Take everything you read or hear "anywhere" butt especially on the Web with a large dose of salt.

06-18-2008, 10:43 AM	#17
Gedjack ^OP Adventurer Joined: Apr 2008 Oddometer: 90	Taukron, I did'nt see any fork protectors on that list of parts you supplied, what did you do about them ?

06-19-2008, 11:04 AM	#19
Gedjack ^OP Adventurer Joined: Apr 2008 Oddometer: 90	Thanks for that, any chance of some pics when its fininshed.

07-05-2008, 08:49 PM	#23
Taurkon Studly Adventurer Joined: Aug 2007 Location: Calgary, Ab Oddometer: 568	Here is a pic of the bike after the high fender came in handy... and a few once it was all cleaned up...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode