DR750 & DR800 owners thread - Page 921

Resi · 11-19-2012, 10:31 PM

Gidday Puddle.

Wich kind of bars have you mounted? Fivestars? These are well known for beeing not so tough

However, colorcode of the white parts is "30H", for blue "34S" (on SR41 drumbrake).
Availlable at your Suzuki drugstore

Or: Get these parts to a painter with a scanner/camera for mixing up matching paint.

Cheers,
Lars

Puddle · 11-20-2012, 05:45 AM

They are the one's on the Hessler sight - Riky.

Resi · 11-20-2012, 01:08 PM

Hm, I have a set of Riky Cross Mr. Hessler improved in my shed.
If you want me to do some pictures or measurements, leave me a note.

Now I have some RDMOTO from Czech republic, these are 25mm tubes instead of 22 or so and differ in mounting.

Cheers,
Lars

treborbig · 11-21-2012, 01:56 AM

Hi gentlemen bought a dr 750 while ago and now starting on a resto .Photos we will see

.Didnt seem to bad except for some issues

So carbs siezed up, easier to buy some as pretty generic.Do have to buy 4 tho so if anyone needs some let me know .Wiring is toast ,missing fuse box,probably why wiring melted

and starter regulator .Assuming these are generic as well ,rather than pay cmsl prices, tho a good website.Will get wiring loom from there.Do we think easier to replace most electrical stuff eg.rectifier, coils or do they survive ?Also frame has rust on bottom rail; running up to foot peg mount got the tig out so should be fixable. Tins all good, beak,dash lights, there .Thanks guys

jimbobthebear · 11-21-2012, 03:18 AM

Morning All

Wondered if anybody had seen this. I've emailed them for details and the price is around 18K Euros. a bit out of my league. So.... one of you lovely chaps needs to buy it :o)

http://www.classic-motorbikes.com/Suzuki_DRZ+800.htm

I have a PDF with all the spares included, it's ridiculous. I want it

spen · 11-21-2012, 08:48 AM

Quote:

Originally Posted by treborbig

Hi gentlemen bought a dr 750 while ago and now starting on a resto .Photos we will see

.Didnt seem to bad except for some issues

So carbs siezed up, easier to buy some as pretty generic.Do have to buy 4 tho so if anyone needs some let me know .Wiring is toast ,missing fuse box,probably why wiring melted

and starter regulator .Assuming these are generic as well ,rather than pay cmsl prices, tho a good website.Will get wiring loom from there.Do we think easier to replace most electrical stuff eg.rectifier, coils or do they survive ?Also frame has rust on bottom rail; running up to foot peg mount got the tig out so should be fixable. Tins all good, beak,dash lights, there .Thanks guys

I don"t think you can buy a new loom anymore ,CDI is over £300

Ladder106 · 11-21-2012, 09:24 AM

Thanks for that link, Jimbob.

I at least got a lot of great photos from the ad, which is all I'll ever get.

Those forks look suspiciously like a Honda part....at least the front wheel does - odd.

It would appear that there is lots of money sitting in that warehouse, the DRZ is a mere pittance.

jimbobthebear · 11-21-2012, 10:00 AM

Exactly same. Emailed for price.... Sulked for a while.... Right click, save image!

I noticed the way the spindle clamps and did wonder what the forks were. Interesting

Have you seen how small dia the front pipe is?! Presumably it's a different cam and its to increase scavenge?

Bambi · 11-21-2012, 12:13 PM

Hi there,
I've already seen that ad some time ago. Very nice bike, but due to lack of money I have to stand back for the luckier ones. On the other hand, I don't have to have everything ... but, nice it would be ...
Stefan has been involved in it's restoration, at least by giving advice. Don't know, if he helped with parts and work, too.
Just noticed that I first saw the ad in mid-septembre. There is (and has been) a lot more Paris-Dakar hard-ware in this place!!!
Kind regards, Bambi
PS: don't forget about the Big-calender 2013, 27. of novembre comes soon!

jimbobthebear · 11-22-2012, 08:32 AM

How do we get hold of the Calender?

TobyG · 11-22-2012, 08:35 AM

Quote:

Originally Posted by jimbobthebear

Morning All

Wondered if anybody had seen this. I've emailed them for details and the price is around 18K Euros. a bit out of my league. So.... one of you lovely chaps needs to buy it :o)

http://www.classic-motorbikes.com/Suzuki_DRZ+800.htm

I have a PDF with all the spares included, it's ridiculous. I want it

Awesome :O

Wait till Stefan Hessler sees that

Might be a cent or two too expensive, though.

Bambi · 11-22-2012, 09:27 AM

Hello Jimbob,
go back one page and look out for my avatar on that page. Seventh and ninth comment, counting from above ...
Kind regards, Bambi

treborbig · 11-23-2012, 04:45 AM

Quote:

Originally Posted by spen

I don"t think you can buy a new loom anymore ,CDI is over £300

Hey how is ireland ,lot of you guys over here in aus Loom dosent seem to be a problem, more wondering about other components and they may be fine anyway

Might even try local suzuiki dealer.Best place to get a new piston\ rings anyone?.Wondering if 780 kit or 820 kit for dr 650 from procycle in US would work ? Where would i get a manual from tried the PDF one; no luck.Thanks Guys have a good weekend

robmoto · 11-24-2012, 03:05 PM

Treb the 650 gudgon pin is a few mm smaller than the BIG.

Resi · 11-25-2012, 04:50 AM

I remember an inmate... 108mm piston with a copper head gasket...

Cheers,
Lars

11-21-2012, 01:56 AM	#13804
treborbig Adventurer Joined: Nov 2012 Oddometer: 20	Dr big resto Hi gentlemen bought a dr 750 while ago and now starting on a resto .Photos we will see .Didnt seem to bad except for some issues So carbs siezed up, easier to buy some as pretty generic.Do have to buy 4 tho so if anyone needs some let me know .Wiring is toast ,missing fuse box,probably why wiring melted and starter regulator .Assuming these are generic as well ,rather than pay cmsl prices, tho a good website.Will get wiring loom from there.Do we think easier to replace most electrical stuff eg.rectifier, coils or do they survive ?Also frame has rust on bottom rail; running up to foot peg mount got the tig out so should be fixable. Tins all good, beak,dash lights, there .Thanks guys

11-21-2012, 03:18 AM	#13805
jimbobthebear Adventurer Joined: May 2011 Oddometer: 11	Ex-Works 1988 Marlboro Bike Morning All Wondered if anybody had seen this. I've emailed them for details and the price is around 18K Euros. a bit out of my league. So.... one of you lovely chaps needs to buy it :o) http://www.classic-motorbikes.com/Suzuki_DRZ+800.htm I have a PDF with all the spares included, it's ridiculous. I want it

11-21-2012, 12:13 PM	#13809
Bambi Gnarly Adventurer Joined: May 2009 Location: Linz upon Rhine, Germany Oddometer: 486	Hi there, I've already seen that ad some time ago. Very nice bike, but due to lack of money I have to stand back for the luckier ones. On the other hand, I don't have to have everything ... but, nice it would be ... Stefan has been involved in it's restoration, at least by giving advice. Don't know, if he helped with parts and work, too. Just noticed that I first saw the ad in mid-septembre. There is (and has been) a lot more Paris-Dakar hard-ware in this place!!! Kind regards, Bambi PS: don't forget about the Big-calender 2013, 27. of novembre comes soon! __________________ 'Find me kindness, find me beauty, find me truth ...' (Dreamtheater, Learning to live)

11-22-2012, 09:27 AM	#13812
Bambi Gnarly Adventurer Joined: May 2009 Location: Linz upon Rhine, Germany Oddometer: 486	Hello Jimbob, go back one page and look out for my avatar on that page. Seventh and ninth comment, counting from above ... Kind regards, Bambi __________________ 'Find me kindness, find me beauty, find me truth ...' (Dreamtheater, Learning to live)

11-24-2012, 03:05 PM	#13814
robmoto Beastly Adventurer Joined: Feb 2009 Location: Bathurst Australia Oddometer: 3,244	Treb the 650 gudgon pin is a few mm smaller than the BIG. __________________ I ride alone and not a KTM in sight .

11-19-2012, 10:31 PM	#13801
Resi Gnarly Adventurer Joined: Jul 2011 Location: Nassau Area Oddometer: 194	Gidday Puddle. Wich kind of bars have you mounted? Fivestars? These are well known for beeing not so tough However, colorcode of the white parts is "30H", for blue "34S" (on SR41 drumbrake). Availlable at your Suzuki drugstore Or: Get these parts to a painter with a scanner/camera for mixing up matching paint. Cheers, Lars

11-20-2012, 05:45 AM	#13802
Puddle Gnarly Adventurer Joined: Sep 2009 Location: Canada, Ontario, Toronto Oddometer: 111	They are the one's on the Hessler sight - Riky.

11-20-2012, 01:08 PM	#13803
Resi Gnarly Adventurer Joined: Jul 2011 Location: Nassau Area Oddometer: 194	Hm, I have a set of Riky Cross Mr. Hessler improved in my shed. If you want me to do some pictures or measurements, leave me a note. Now I have some RDMOTO from Czech republic, these are 25mm tubes instead of 22 or so and differ in mounting. Cheers, Lars

11-21-2012, 09:24 AM	#13807
Ladder106 It's a short cut, really Joined: Jan 2005 Location: Davis, CA Oddometer: 4,258	Thanks for that link, Jimbob. I at least got a lot of great photos from the ad, which is all I'll ever get. Those forks look suspiciously like a Honda part....at least the front wheel does - odd. It would appear that there is lots of money sitting in that warehouse, the DRZ is a mere pittance.

11-21-2012, 10:00 AM	#13808
jimbobthebear Adventurer Joined: May 2011 Oddometer: 11	Exactly same. Emailed for price.... Sulked for a while.... Right click, save image! I noticed the way the spindle clamps and did wonder what the forks were. Interesting Have you seen how small dia the front pipe is?! Presumably it's a different cam and its to increase scavenge?

11-22-2012, 08:32 AM	#13810
jimbobthebear Adventurer Joined: May 2011 Oddometer: 11	How do we get hold of the Calender?

11-25-2012, 04:50 AM	#13815
Resi Gnarly Adventurer Joined: Jul 2011 Location: Nassau Area Oddometer: 194	I remember an inmate... 108mm piston with a copper head gasket... Cheers, Lars

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode