Uly Topcase Rack Install Kit?

vtwin · 10-29-2008, 05:56 PM

I recently got a Ulysses topcase rack off fleabay, but without any bolts or mounting kit. Can anyone provide a source for these parts? Can anyone provide a picture of the mounting points? Thanks all.

prowler1 · 10-30-2008, 05:22 AM

You'll need the Buell crossmember that bolts to underside of the seat base and some mounting bolts. Check with your local Buell dealer for the crossmember part number and cost. Once you've got that, you'll be able to see where the mounting locations are. The Buell specific bolting hardware is kinda expensive. I just picked up some grade 8 hardware at my local hardware store to bolt it up.

vtwin · 10-30-2008, 04:47 PM

Thanks Prowler, can you post a picture of the underside?

shawnwabrams · 11-08-2008, 03:49 PM

I'm not sure what bag and rack system you got but here is what mine looks like. I have the Factory bought Buell Bags and racks.

vtwin · 11-09-2008, 08:01 AM

Thanks Shawn, the tubular bar that adapts the rack to the tail section is what's missing. ASB can get it now, just waiting for the guy that sold me the rack to look for the mounting kit.

10-29-2008, 05:56 PM	#1
vtwin ^OP Air cooled runnin' mon Joined: Jan 2005 Location: NorCal Oddometer: 6,103	Uly Topcase Rack Install Kit? I recently got a Ulysses topcase rack off fleabay, but without any bolts or mounting kit. Can anyone provide a source for these parts? Can anyone provide a picture of the mounting points? Thanks all. __________________ I used to be indecisive. Now I'm not so sure. *"You only have too much fuel if you're on fire"* *unknown*

10-30-2008, 04:47 PM	#3
vtwin ^OP Air cooled runnin' mon Joined: Jan 2005 Location: NorCal Oddometer: 6,103	Thanks Prowler, can you post a picture of the underside? __________________ I used to be indecisive. Now I'm not so sure. *"You only have too much fuel if you're on fire"* *unknown*

11-09-2008, 08:01 AM	#5
vtwin ^OP Air cooled runnin' mon Joined: Jan 2005 Location: NorCal Oddometer: 6,103	Thanks Shawn, the tubular bar that adapts the rack to the tail section is what's missing. ASB can get it now, just waiting for the guy that sold me the rack to look for the mounting kit. __________________ I used to be indecisive. Now I'm not so sure. *"You only have too much fuel if you're on fire"* *unknown*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-30-2008, 05:22 AM	#2
prowler1 Gnarly Adventurer Joined: Aug 2007 Location: upper central midwest by a big lake Oddometer: 135	You'll need the Buell crossmember that bolts to underside of the seat base and some mounting bolts. Check with your local Buell dealer for the crossmember part number and cost. Once you've got that, you'll be able to see where the mounting locations are. The Buell specific bolting hardware is kinda expensive. I just picked up some grade 8 hardware at my local hardware store to bolt it up.

11-08-2008, 03:49 PM	#4
shawnwabrams n00b Joined: Jan 2008 Oddometer: 1	I'm not sure what bag and rack system you got but here is what mine looks like. I have the Factory bought Buell Bags and racks.