ADVrider

Go Back   ADVrider > Bikes > Thumpers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 04-12-2013, 07:12 AM   #16861
Shibby!
Beastly Adventurer
 
Joined: Aug 2010
Location: Currently - Canada
Oddometer: 1,646
Quote:
Originally Posted by FlyGuy View Post
Thanks I took a double take (look)
I have a small IMS 3.2 And got good clearance, but it is tight. might impede flow a bit?
Sounds like you have a non shrouded set up that works fine?
Good to know.
I have had thermostats stick open after getting up in the 230f temps
this ought to prevent that?

These T-stats are known to stick open.

Mounting the fan on the rad (or very close) is what most do here. Works perfect. Hontri actually mounted them on the front of the rads I think last time I checked.

I've been meaning to do a fan switch eventually to make it automatic. Otherwise I know when it's going to be running hot and leave it on for city driving, single track, and idling for pictures, etc.

Most people with DC systems float the ground as to not interfere with the frame grounded A/C system of the bike.
__________________
Tour of Idaho T1 Challenge - https://spotwalla.com/tripViewer.php...551f1642711d75
Eat. Sleep. Ride - The Great Divide: http://advrider.com/forums/showthrea...4#post19193704
Go, Get Lost - Heading South: http://advrider.com/forums/showthread.php?t=735690
Dirt Donkeys Do Baja: http://advrider.com/forums/showthread.php?t=671095

Shibby! is offline   Reply With Quote
Old 04-12-2013, 08:58 AM   #16862
KYLEISCOOL
Who
 
KYLEISCOOL's Avatar
 
Joined: Dec 2010
Location: So. Cal. U.S.A
Oddometer: 131
stock wheels

Hey gents. Got a stock set of wheels posted in the FM.
__________________
Gotta ride something! 02' XR650R slightly personalized
KYLEISCOOL is offline   Reply With Quote
Old 04-13-2013, 03:34 PM   #16863
jm-2008
Gnarly Adventurer
 
jm-2008's Avatar
 
Joined: Sep 2008
Location: South Eastern Australia
Oddometer: 478
Wiring loom plugs needed

Looking for a source for these (male & female) XR650R OEM wiring loom plugs -
Used where the Rec/Reg plugs into the wiring loom behind the head light

Any help appreciated
Many thanks,
JM-2008
http://jm-2008.smugmug.com/Motorcycl...4389&k=Z7hrXfz
jm-2008 is offline   Reply With Quote
Old 04-13-2013, 03:45 PM   #16864
Sean-0
Closed
 
Sean-0's Avatar
 
Joined: Oct 2010
Location: Oztraya Mate
Oddometer: 4,165
you could buy any 4 pin plug to suit ,,, jaycar comes to mind

or service honda
Sean-0 is online now   Reply With Quote
Old 04-13-2013, 03:53 PM   #16865
jm-2008
Gnarly Adventurer
 
jm-2008's Avatar
 
Joined: Sep 2008
Location: South Eastern Australia
Oddometer: 478
4 Pin Plug

[QUOTE=Sean-0;21178738]you could buy any 4 pin plug to suit ,,, jaycar comes to mind

or service honda

Thanks Sean-O
Will check out J-Car
jm-2008 is offline   Reply With Quote
Old 04-13-2013, 06:51 PM   #16866
Jayrod1318
Poster
 
Jayrod1318's Avatar
 
Joined: Jun 2011
Location: Here and there and stuff.
Oddometer: 1,525
Front wheel

Front wheel for sale, let's make a deal?

http://www.advrider.com/forums/showp...ostcount=10946
__________________
Jayrod1318 is offline   Reply With Quote
Old 04-14-2013, 08:35 AM   #16867
thouk
Gnarly Adventurer
 
Joined: Apr 2006
Location: Lincoln, Ne my hometown, Where I'm freezin
Oddometer: 186
For Jm

http://www.electricalconnection.com/...ts/hitachi.htm
__________________
My Miss Piggie, a dual sported Honda Xr650r.
My Ottoman, a lovely Honda PC800 Pacific Coast

May God look upon you as you ride with Jesus with the Holy Spirit in your heart.
thouk is offline   Reply With Quote
Old 04-14-2013, 11:15 AM   #16868
BuRPsa
Finally growing up..
 
BuRPsa's Avatar
 
Joined: Feb 2011
Location: Pretoria
Oddometer: 548
Quote:
Originally Posted by jm-2008 View Post
Looking for a source for these (male & female) XR650R OEM wiring loom plugs -
Used where the Rec/Reg plugs into the wiring loom behind the head light

Here?
http://www.vintageconnections.com/
BuRPsa is offline   Reply With Quote
Old 04-14-2013, 01:28 PM   #16869
XR650Gnar
Adventurer
 
Joined: Jan 2012
Location: Wasatch Front
Oddometer: 14
Anyone know what the torque value is for the main cylinder bolt studs (4) I got 4 new ones for the rebuild, I know that the manual says 49lbs/ft for the nuts, is it the same for the studs themselves?
XR650Gnar is offline   Reply With Quote
Old 04-14-2013, 01:42 PM   #16870
dirtyoffroad
Studly Adventurer
 
dirtyoffroad's Avatar
 
Joined: Jan 2008
Location: merrimack,N.H.
Oddometer: 522
Quote:
Originally Posted by XR650Gnar View Post
Anyone know what the torque value is for the main cylinder bolt studs (4) I got 4 new ones for the rebuild, I know that the manual says 49lbs/ft for the nuts, is it the same for the studs themselves?
just locktite them and thread them in,they should bottom out or run out of thread.
__________________
09 Husaberg FE 570
07 Honda XR 650R
11 BMW R1200GSA
dirtyoffroad is offline   Reply With Quote
Old 04-14-2013, 01:49 PM   #16871
XR650Gnar
Adventurer
 
Joined: Jan 2012
Location: Wasatch Front
Oddometer: 14
So as long as theyre snug and bottomed out they shouldnt have to be torqued? I guess that makes sense as the torque comes from the head nuts.

Thanks!
XR650Gnar is offline   Reply With Quote
Old 04-14-2013, 02:33 PM   #16872
dirtyoffroad
Studly Adventurer
 
dirtyoffroad's Avatar
 
Joined: Jan 2008
Location: merrimack,N.H.
Oddometer: 522
that is correct,no torque required till you are holding something together
__________________
09 Husaberg FE 570
07 Honda XR 650R
11 BMW R1200GSA
dirtyoffroad is offline   Reply With Quote
Old 04-15-2013, 02:19 AM   #16873
TJE
Space Emperor
 
Joined: Sep 2009
Oddometer: 63
model specifications?

I'm about to order some parts for my Pig online, but they have some odd model names: AC/A, A/A, A/B and AC/B. I can only find info about the D, DK, DM, U, etc type of model nomenclature ...

Can anyone explain what it means?
__________________
2006 Vespa Grantourismo 125L
1998 Honda XRV750 Africa Twin
2003 Honda XR650R

My gallery: http://www.subsignal.com/DEMO
TJE is offline   Reply With Quote
Old 04-15-2013, 02:34 AM   #16874
tractor4play
Gnarly Adventurer
 
Joined: Jan 2009
Oddometer: 105
axle

Quote:
Originally Posted by Adamco2 View Post
"i am having issues getting my hands on a front wheel spindle."

If it is an axle that you are looking for, seems the same as spindle, I have one or two laying around. I'll look into what it would cost send it to you in Ireland if you like.
By the way the CR/CRF axle is a different axle. I never found one that would work in it's place.

Adam
yea Adam front axle.
if your checking shipping prices remember i am in the north which comes under uk rather than Ireland.
i can only get to my computor twice a week so bare with me and thanks in advance for any help.
Ian.
tractor4play is offline   Reply With Quote
Old 04-15-2013, 10:02 AM   #16875
crypto666
Beastly Adventurer
 
Joined: May 2011
Location: The best trails in Nevada
Oddometer: 1,192
Quote:
Originally Posted by TJE View Post
I'm about to order some parts for my Pig online, but they have some odd model names: AC/A, A/A, A/B and AC/B. I can only find info about the D, DK, DM, U, etc type of model nomenclature ...

Can anyone explain what it means?
I believe AC is a california model with smog junk.

I would use A/A, but chances are that it doesn't matter for 95% of the parts, and the 5% of parts not the same are the ones you won't be wanting to replace anyhow.
crypto666 is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 03:34 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014