CJDesigns Footpegs - Page 3

HOT DAMN! · 03-24-2009, 06:15 PM

D I Y

wsdbikes · 03-24-2009, 08:35 PM

I would like a DIY for R1100GS BMW. In the works?

Dusty · 03-24-2009, 10:31 PM

DIY kit...

cjracer · 03-25-2009, 06:18 AM

Quote:

Originally Posted by PackMule

GS800?

I'd need a set of pegs to work off of, have any leads. Only GS800 I've seen was at the Chicago IMS show. Forgot to get some pics.

cjracer · 03-25-2009, 06:19 AM

Quote:

Originally Posted by RXV_Poor

I want to try these on pivot pegs.

Could be done, would need a set of pegs though. I'll put it on the list.

cjracer · 03-25-2009, 06:28 AM

Quote:

Originally Posted by wsdbikes

I would like a DIY for R1100GS BMW. In the works?

Is this for the 95' you have? If I made a set it would most likley be for the newest bikes first though.

Once I get some feedpack on the KTM pegs I'll know better how these will adapt to other bikes.

For pegs other than the original KTM, if you can post of a picture of the pegs you'd like to have these made for that may be helpful.

thanks,
cj

PackMule · 03-25-2009, 06:33 AM

Quote:

Originally Posted by cjracer

I'd need a set of pegs to work off of, have any leads. Only GS800 I've seen was at the Chicago IMS show. Forgot to get some pics.

I can get you whatever kind of measurements/pics/etc that you need.

What kind of down time are you looking at for actually needing pegs in hand?

fire_strom · 03-25-2009, 07:03 AM

I'm in for any color. DIY, 950ADV.
Scott

cjracer · 03-25-2009, 07:16 AM

Quote:

Originally Posted by PackMule

I can get you whatever kind of measurements/pics/etc that you need.

What kind of down time are you looking at for actually needing pegs in hand?

W/ a good set of pics and some measurements I can figure 75% of it out before hand.

When this gets going. I'd think no more than a week to fit them up and send them complete back to you.

I'll post when I'm ready to go onto other pegs, but if you want to send me some pics and measurements now that would help.

craig at cjdesigns llc . com

RXV_Poor · 03-25-2009, 09:57 AM

Quote:

Originally Posted by cjracer

Is this for the 95' you have? If I made a set it would most likley be for the newest bikes first though.

Once I get some feedpack on the KTM pegs I'll know better how these will adapt to other bikes.

For pegs other than the original KTM, if you can post of a picture of the pegs you'd like to have these made for that may be helpful.

thanks,
cj

I'll send them to you if you want.

PackMule · 03-25-2009, 09:58 AM

Quote:

Originally Posted by cjracer

W/ a good set of pics and some measurements I can figure 75% of it out before hand.

When this gets going. I'd think no more than a week to fit them up and send them complete back to you.

I'll post when I'm ready to go onto other pegs, but if you want to send me some pics and measurements now that would help.

craig at cjdesigns llc . com

You have PM.

wsdbikes · 03-25-2009, 10:25 AM

yes would be for the '95. the stockers are pretty narrow and made of steel. I am putzing around with a set of KTM pegs now to see if I can get them to fit. If it works out I would have a set of stock pegs for you to look at.

Quote:

Originally Posted by cjracer

Is this for the 95' you have? If I made a set it would most likley be for the newest bikes first though.

Once I get some feedpack on the KTM pegs I'll know better how these will adapt to other bikes.

For pegs other than the original KTM, if you can post of a picture of the pegs you'd like to have these made for that may be helpful.

thanks,
cj

JOKER650 · 03-26-2009, 04:22 PM

DO these extenders work with the PIVOT Pegs for the SE?

What aare they made of ?
They look aluminum , and if so wouldn,t the grips wear off fast?

Signed: Look'n to Demo

thetoecutter · 03-26-2009, 04:57 PM

CJ,

What's the overall length? I really want/NEED a wider peg but the other ones out there seem too long for some of the trails (firecuts) I ride. I worry about catching them. I stood on some long-pegs at the KTM event last year, it might have even been on your bike, and they felt too wide.

Say I want a certain length, could that be done?

Thanks and looking forward to see what you have to say.

Skip

SCsurfer · 03-26-2009, 10:10 PM

CJ,
My 640 Adventure needs a set .

03-24-2009, 06:15 PM	#31
HOT DAMN! ♪ ♪ ♪ Joined: Aug 2007 Location: Hammond, IN. Oddometer: 5,984	D I Y __________________ Once in a while you get shown the light in the strangest of places if you look at it right

03-24-2009, 08:35 PM	#32
wsdbikes New Max is Mad Joined: May 2007 Location: PNW Oddometer: 1,283	I would like a DIY for R1100GS BMW. In the works? __________________ Wsdbikes "I only wish I had video running when WSD did a no footed can-can over some boulders on mainline....two feet of air easy..." -Abdelhub Yeah, on the GS http://vimeo.com/3232838 Notable Past-'01 KLR 250, 95 R1100GS, 06 KTM 950 SM, 69 Bridgestone 90

03-24-2009, 10:31 PM	#33
Dusty Beastly Adventurer Joined: Jun 2007 Location: Rough Rider Country...Bismarck ND Oddometer: 1,020	DIY kit... __________________ Originally Posted by d0gWateR Vagrant, vagabond, transient, hobo, bum. But park a motorcycle next to him and PRESTO! He's an advrider!

03-25-2009, 07:03 AM	#38
fire_strom Beastly Adventurer Joined: Sep 2004 Location: Durango, CO Oddometer: 1,255	I'm in for any color. DIY, 950ADV. Scott __________________ Officially moto-free 6 cycles with pedals

03-26-2009, 04:22 PM	#43
JOKER650 Beastly Adventurer Joined: Feb 2006 Location: British Columbia , Canada.....Eh Oddometer: 1,208	DO these extenders work with the PIVOT Pegs for the SE? What aare they made of ? They look aluminum , and if so wouldn,t the grips wear off fast? Signed: Look'n to Demo __________________ *Life's short...ride far* Over 2000 plated dirt riders...Digg'n up the dirt every other day, all over BC *http://www.dualsportbc.com/*

03-26-2009, 04:57 PM	#44
thetoecutter Cutter of Toes Joined: Sep 2005 Location: Lower Bucks Co, PA Oddometer: 1,814	CJ, What's the overall length? I really want/NEED a wider peg but the other ones out there seem too long for some of the trails (firecuts) I ride. I worry about catching them. I stood on some long-pegs at the KTM event last year, it might have even been on your bike, and they felt too wide. Say I want a certain length, could that be done? Thanks and looking forward to see what you have to say. Skip __________________ 450 sx street V4.3 05 950

03-26-2009, 10:10 PM	#45
SCsurfer surfing explorer Joined: Sep 2007 Location: San Clemente Oddometer: 171	CJ, My 640 Adventure needs a set . __________________ '07 640 Adventure

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode