|
08-26-2009, 10:33 AM
|
#1 |
|
PsyKotic Waterfowl
Joined: Mar 2004
Location: Seattle (Berkeley with rain)
Oddometer: 10,117
|
R/25 Handlebar diameter?
Anybody know the diameter of R/25 handlebars? Same diameter as a K75? (Hopefully.)
__________________
93 K1100LT, 94 K1100RS, 86-97 K75F (K75/100/1100 Frankenbrick), 91 K1, 05 KTM 450 SMR IBA #17739 (SS1K, BBG, 50CC) http://home.comcast.net/~smithduck/BMW_Tours.htm |
|
|
|
08-26-2009, 01:08 PM
|
#2 |
|
Grin!
Joined: Apr 2008
Location: Road Island
Oddometer: 4,441
|
As far as I know, yes, the BMW bars were all 22mm. I know that the /2 bars were, presumably the thumper-bars were as well....
edit: I just check p/n's, to see if they cross reference, and the numbers for the R50 are different from the numbers for the R25... is it really an R25, or a slash/something R25, maybe an R27? The R25 was an early-1950's-only bike.... You might want to play with the MaxBMW fiche system bpeckm screwed with this post 08-26-2009 at 01:17 PM |
|
|
|
|
08-26-2009, 01:12 PM
|
#3 |
|
PsyKotic Waterfowl
Joined: Mar 2004
Location: Seattle (Berkeley with rain)
Oddometer: 10,117
|
Thanks. After some Googling I found a site sells vintage parts and yes, it seems like most, if not all of them, are 22mm.
__________________
93 K1100LT, 94 K1100RS, 86-97 K75F (K75/100/1100 Frankenbrick), 91 K1, 05 KTM 450 SMR IBA #17739 (SS1K, BBG, 50CC) http://home.comcast.net/~smithduck/BMW_Tours.htm |
|
|
|
 |
| Share |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
