KTM 950/990 ADV - 950 SE Kickstand Relocation Bracket

[Rich2wd]

G'day PABIker, well done on your great looking and functional bracket. I have 4 questions that other potential buyers may have.

1. Does your bracket fit without modification to the chain sliding block?

2. Under extreme suspension/chain travel does your bracket clear the chain?

3. On the frame tab that secures the subframe (and your bracket) it has a counter-sunk hole for the M10 bolt. Is it necessary to have a counter-sunk like washer to fill this void or not?

4. And with your bracket is the bike returned to its original lean angle as it rest on the side stand? I only ask this because I think the bike with Scorpions fitted the lean angle is too minimal (makes me anxious). A couple more degrees off the perpendicular maybe a benefit.

Again, congratulations on a well designed bracket. All the best.

Cheers Rich

[dad2bike]

PM sent. I want on the list.
Awesome piece.

[pigstain]

PM sent. I'm in for one. Great price also.

You can ship up to 70lbs for $10 using the USPS Priority Mail boxes they provide if it will fit. I think $10 is very doable for shipping.

[volrider]

Originally Posted by PABiker

Not sure, but it should. I think the S has a longer kickstand. If anybody out there knows please chime in.

Here are my thoughts on this.

Sidestand length shouldn't matter since your stand is the correct length for the suspension on your bike. What would make a difference is the angle it comes off the bike. If you look at the parts diagrams, the angled part of the sidestand bracket is the same for the Adv, S, and SE, so they all come off the bike at the same angle. So in my simple mind, it seems like if PABikers bracket has his sidestand footpad flat on the ground, his angle is correct, and the result would be the same if it's used on an S or SE with stock sidestand.

That make any sense???????

BTW, I'll take one. Sending PM now.

[MT950]

Put me on the list!

[PABiker]

Originally Posted by Rich too_wheelz

G'day PABIker, well done on your great looking and functional bracket. I have 4 questions that other potential buyers may have.

1. Does your bracket fit without modification to the chain sliding block?

Yes, it fits directly under it.

2. Under extreme suspension/chain travel does your bracket clear the chain?

Yes, in one of the pictures you will see the clearance when the bike on the centerstand so the suspension is at it's greatest travel.

3. On the frame tab that secures the subframe (and your bracket) it has a counter-sunk hole for the M10 bolt. Is it necessary to have a counter-sunk like washer to fill this void or not?

No, the bracket attaches to the frame so the countersunk hole is covered up, I will send along a new M10-1.25x30 mm bolt and flat washer with the bracket.

4. And with your bracket is the bike returned to its original lean angle as it rest on the side stand? I only ask this because I think the bike with Scorpions fitted the lean angle is too minimal (makes me anxious). A couple more degrees off the perpendicular maybe a benefit.

Yes, the kickstand mounting point is at the same angle and height as the the original location. So the lean angle will exactly the same.

Since the two mounting points under the bike are the centerstand bump stops, I will include flat washers to put above the lock nuts. For those that do not have a centerstand, I will include (2) M8-1,25x20 mm bolts and flat washers with the bracket.

Again, congratulations on a well designed bracket. All the best.

Cheers Rich

Thanks for your interest Rich, I answered all the questions above.

[Rich2wd]

G'day PABiker, thanks for you reply to my questions much appreciated. I too would like to purchase a Kickstand Relocator. I will send a PM as requested.

Cheers Rich

[wingysataday]

how much??

[thugdog]

see post 71 for price




.

[PABiker]

Interest is very good, I have messages for 25 pieces so far. I just got off the phone with the shop and told him to make 50 pieces to start. He is going to order the metal and hopefully laser out the parts sometime next week.

After that it's off to the machine shop and then the powder coater so I will not see the first piece for at least 3-4 weeks from now.

This will allow me the time to setup the PayPal stuff, so I will contact all of you in the next few weeks with payment instructions.

I am going to create a new thread in the Vendor section next week with all the information so that I don't get yelled at the Admin.

Thanks everybody.

[RogerDe]

I'm in sent a PM...Ride On...

[stephenws]

Sent you a PM yesterday. Will be on my first long motorcycle trip from Aug.8th through Sept.1st. I'll place my order as soon as I get back!

Thanks for coming up with a great solution and making it available to us.

[sloMark]

Originally Posted by VTvfr

What... you get a new 990 AND baby clothes and now you want serial number 2??? Wait in line like the rest of us!

Haha, jk. Hope the wife is doing well.

Too bad we couldn't make it out to CO with these crazies.

what is up you filthy mongrel? i ain't visited here in awhile. we'll get togther at pabiker's crib and install these things. also, we need to get together for a ride when they get back. please excuse my typos, i got the new little rat tucked under my arm as i am typing. how you lookin for the 1st or 3rd weekend in August to get together?

[VTvfr]

Originally Posted by sloMark

what is up you filthy mongrel? i ain't visited here in awhile. we'll get togther at pabiker's crib and install these things. also, we need to get together for a ride when they get back. please excuse my typos, i got the new little rat tucked under my arm as i am typing. how you lookin for the 1st or 3rd weekend in August to get together?

Joe-
Better believe we're both coming over when you get back to throw these on.


Mark-
Def gotta get together soon.
Aug 1st is out, but 2nd will work.
15th is good, 16th is the Midway/Center ride on RCR

[PABiker]

Originally Posted by sloMark

what is up you filthy mongrel? i ain't visited here in awhile. we'll get togther at pabiker's crib and install these things. also, we need to get together for a ride when they get back. please excuse my typos, i got the new little rat tucked under my arm as i am typing. how you lookin for the 1st or 3rd weekend in August to get together?

Originally Posted by VTvfr

Joe-
Better believe we're both coming over when you get back to throw these on.


Mark-
Def gotta get together soon.
Aug 1st is out, but 2nd will work.
15th is good, 16th is the Midway/Center ride on RCR

What's up my RCR brothers?

We just finished loading up the trailer and are heading for home tomorrow morning.

We rode every pass in the Ouray/Telluride/Silverton area and have had enough. Nobody got (too) hurt, no flat tires, and no breakdowns. Not bad for 8 guys on the mountains around here.

See you guys this weekend.