ADVrider

Go Back   ADVrider > Bikes > GSpot > Parallel Universe
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 06-29-2010, 09:46 AM   #1
Dieselboy OP
Journey not Destination
 
Dieselboy's Avatar
 
Joined: Sep 2003
Location: Port of the Gasparilla
Oddometer: 1,122
little help w torque spec

Would someone w the service manual please tell me the torque specs for the two bolts that hold the left peg and sidestand assembly on the bike?





Also, the torque spec for the side stand bolt.


Thanks. I'm traveling and needed to work on the sidestand.
__________________
Dieselboy
~~~~~~~~~~~~~~~~~~~
The Adventure Continues

Dieselboy screwed with this post 11-22-2012 at 08:41 AM
Dieselboy is offline   Reply With Quote
Old 06-29-2010, 10:17 AM   #2
Bartron
Bike Punisher
 
Bartron's Avatar
 
Joined: Oct 2007
Location: mid-west-northern Canadia
Oddometer: 692
OK. Looks like in the 20 minutes I've spent looking others have already responded. I can only offer pictures - one here and one in a further post.
Attached Images
 
__________________
Ride on.

==================================
:: Furious Basterds: Velox, Vehemens, Oblivio
::
:: "For those who don't understand, no explanation is possible. For those who do, none is necessary."

Bartron screwed with this post 06-29-2010 at 10:45 AM
Bartron is offline   Reply With Quote
Old 06-29-2010, 10:27 AM   #3
gr8ridn
Gnarly Adventurer
 
gr8ridn's Avatar
 
Joined: Jun 2009
Location: Kern River Valley, CA
Oddometer: 391
Torque figures

The mounting plate is 50 nm
The side stand bolt is 38 nm
The small nut holding the side stand switch is 6 nm

The plate and side stand bolts are micro-encapsulated meaning they are for one use. If you are re-using be sure to apply blue Loctite to work as the original micro-encapsulated bolts did.
__________________
2014 R1200GSAW
Racing Blue, Premium Group, DWA
gr8ridn is offline   Reply With Quote
Old 06-29-2010, 10:33 AM   #5
giodog2000
Gnarly Adventurer
 
Joined: Apr 2009
Location: Montreal , Quebec
Oddometer: 245
Thats the only thing I found about the footrest.

Footrest plate, left, to frame
M10 x 20 - 10.9
38 Nm
__________________
First one out..last one in.

2011 KTM 690 Enduro R
2009 KTM 530 XC-W
giodog2000 is offline   Reply With Quote
Old 06-29-2010, 10:35 AM   #6
giodog2000
Gnarly Adventurer
 
Joined: Apr 2009
Location: Montreal , Quebec
Oddometer: 245
Quote:
Originally Posted by gr8ridn
The mounting plate is 50 nm
The side stand bolt is 38 nm
The small nut holding the side stand switch is 6 nm

The plate and side stand bolts are micro-encapsulated meaning they are for one use. If you are re-using be sure to apply blue Loctite to work as the original micro-encapsulated bolts did.

Hi Jim
__________________
First one out..last one in.

2011 KTM 690 Enduro R
2009 KTM 530 XC-W
giodog2000 is offline   Reply With Quote
Old 06-29-2010, 10:46 AM   #7
Bartron
Bike Punisher
 
Bartron's Avatar
 
Joined: Oct 2007
Location: mid-west-northern Canadia
Oddometer: 692
Here's the other pictorial. Copyright of BMW as usual.
Attached Images
 
__________________
Ride on.

==================================
:: Furious Basterds: Velox, Vehemens, Oblivio
::
:: "For those who don't understand, no explanation is possible. For those who do, none is necessary."
Bartron is offline   Reply With Quote
Old 06-29-2010, 12:17 PM   #8
Dieselboy OP
Journey not Destination
 
Dieselboy's Avatar
 
Joined: Sep 2003
Location: Port of the Gasparilla
Oddometer: 1,122
THANKS y'all! especially for the micro-encapsulation heads up.

Those will get replaced first chance.
__________________
Dieselboy
~~~~~~~~~~~~~~~~~~~
The Adventure Continues
Dieselboy is offline   Reply With Quote
Old 06-29-2010, 02:46 PM   #9
gr8ridn
Gnarly Adventurer
 
gr8ridn's Avatar
 
Joined: Jun 2009
Location: Kern River Valley, CA
Oddometer: 391
Hi Gio. That 798 GSA is looking GOOD!
__________________
2014 R1200GSAW
Racing Blue, Premium Group, DWA
gr8ridn is offline   Reply With Quote
Old 06-29-2010, 03:11 PM   #10
Dieselboy OP
Journey not Destination
 
Dieselboy's Avatar
 
Joined: Sep 2003
Location: Port of the Gasparilla
Oddometer: 1,122
Sideatand fix
__________________
Dieselboy
~~~~~~~~~~~~~~~~~~~
The Adventure Continues
Dieselboy is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 08:50 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014