Outright junk

[brewtus]

I've gone on ad-nauseum about the Junk 'Flex. Here's the proof.

The initial pile. Note the broken frame.





And the second pile.



And the pile in which the pile was unearthed (thanks Grizzz!!!)




And yet a third (and some of the others)




Building and goofing off....







Yes, it was snowing while cleaning junk parts.


And the fun of disassembling broken framed junk.




Yes, a good time could be had by all. It now runs well, leaking head gasket, low power, rubbish brakes and suspension, horrid looks notwithstanding. C'mon vintage guys. There are plenty of dumpster refugees out there waiting to be revived (I have less than 300 bucks in this whole mess so far-fuel and entry fees included!!!) to be section ready. You in??

[NMTrailboss]

...and the saga of your continued love affair with junk continues!

[brewtus]

.....Although you should see NMTB doing expert stuff on this old pile......

[neilking]

Junk pile pulling like magnet. You want to sell all that good stuff?

[brewtus]

Originally Posted by neilking

Junk pile pulling like magnet. You want to sell all that good stuff?

Whaddya need?

[neilking]

Do you have a rolling chassis? or is that what you used to make the runner?

[42mike]

Looks like some high quality stuff right there. Congrats on your find.
I picked up a tlr last November with 221 miles. Has been a blast for my first trial bike.

[brewtus]

Originally Posted by neilking

Do you have a rolling chassis? or is that what you used to make the runner?

The rolling chassis made the runner. I think I'm down to a set of wheels and hubs, brakes, a bent tank, and other odds and ends. I'll have to look.

[neilking]

I might want that whole pile in the last pic busted frame included. I will need the swing arm also if you still have it. I'm thinking of mating the rear part of the frame with another frame front, but I need the forks too. I'm thinking a real frankentrials bike!

[grizzzly]

Originally Posted by brewtus

And the pile in which the pile was unearthed (thanks Grizzz!!!)

I have the engine out of the bike that Chris is “riding” in the driveway. The engine is stuffed into a XL350 frame and I haven’t ridden it in a few years I might be willing to part with it for the right trade /price. (and I do have the rest of that 80)

[brewtus]

Originally Posted by neilking

I might want that whole pile in the last pic busted frame included. I will need the swing arm also if you still have it. I'm thinking of mating the rear part of the frame with another frame front, but I need the forks too. I'm thinking a real frankentrials bike!

I sold the broken frame and a set of forks & triples to Colorado rider Al Duke. I might still have the swingarm, I'll have to look, and I'll PM you tonight with a list of what I have left over (not including the fender mount, which is on it's way to Australia.)

Good idea on the Frankentrialer. That is what Al is building, combining an old TL with the TLR bits that I sold him. I can hardly wait to see it.

Now, what do I need off of Grizzz's 80............?

[grizzzly]

Originally Posted by brewtus

Now, what do I need off of Grizzz's 80............?

the rest of it is in my shop

[brewtus]

Originally Posted by grizzzly

the rest of it is in my shop

You are not helping......

[grizzzly]

Originally Posted by brewtus

You are not helping......

I am thinking about going out to Gordy hill OHV area tomorrow and do some trials riding, you could stop by and check it out and get in some cool riding

[Gordy]

Originally Posted by NMTrailboss

...and the saga of your continued love affair with junk continues!

I hear that Harleys are fun.