ADVrider

Go Back   ADVrider > Bikes > Thumpers
User Name
Password
Register Inmates Photos Site Rules Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 06-02-2010, 02:40 PM   #1
Zecatfish OP
XTique Rider
 
Zecatfish's Avatar
 
Joined: Dec 2006
Location: Arkansas USA
Oddometer: 7,919
KTM LC4E 640... Side Stand??

Seems the Parts fiche shows side stand mounted with two allen head cap bolts.
BUT my 2000 LC4 Enduro uses one cap bolt and a recessed nut of some kind that is MIA. I talked to dealer and he said it was two bolts too.
I need to see if I'm missing something or what gives.

The rear bolt bolts to the frame, the front bolt hole appears to
line up with the stud on the center stand????

Can some one get me a picture of your side stand?
__________________
Google Earth GPS Howto (still a work in progress) use USGS TOPO Maps to layout trails.
http://home.windstream.net/catfish/GPS


The Early Bird gets the worm, but the second mouse gets the cheese.
https://sites.google.com/site/ozarkadventuretours/

Zecatfish is offline   Reply With Quote
Old 06-03-2010, 08:30 AM   #2
Zecatfish OP
XTique Rider
 
Zecatfish's Avatar
 
Joined: Dec 2006
Location: Arkansas USA
Oddometer: 7,919
Seems that I got an odd ball.
Bike has both side and center stand, and KTM Cycle Hutt couldn't find a part number for the shouldered nut that is needed for the side stand.

I guess fro the lack of replies here no one has any ideas either.
__________________
Google Earth GPS Howto (still a work in progress) use USGS TOPO Maps to layout trails.
http://home.windstream.net/catfish/GPS


The Early Bird gets the worm, but the second mouse gets the cheese.
https://sites.google.com/site/ozarkadventuretours/

Zecatfish is offline   Reply With Quote
Old 06-03-2010, 08:37 AM   #3
wrk2surf
on the gas or brakes
 
wrk2surf's Avatar
 
Joined: Dec 2007
Location: THE exact center of California/Bass lake/Yosemite
Oddometer: 6,103
maybe you have an aftermarket side stand....
__________________
Thanks for the 2014 support:BELL HELMETS, SCOTT USA, Kriega USA, Carbon-pro.com, GPR stabilzers, Renazco Racing, Sidi/Motonation, Masters paint and body, Magura , motolab , Tripy GPS, Loctite and Dunlop tires .
wrk2surf is offline   Reply With Quote
Old 06-03-2010, 08:48 AM   #4
jeiff
Gnarly Adventurer
 
Joined: Jan 2007
Location: Top of the Hill
Oddometer: 239
Quote:
Originally Posted by wrk2surf
maybe you have an aftermarket side stand....
Sounds like a SW-Motech sidestand. Check with twistedthrottle.com for parts.
jeiff is offline   Reply With Quote
Old 06-03-2010, 09:08 AM   #5
Zecatfish OP
XTique Rider
 
Zecatfish's Avatar
 
Joined: Dec 2006
Location: Arkansas USA
Oddometer: 7,919
From KTM LC4 Enduro

From KTM LC4 Enduro

From KTM LC4 Enduro

Here you can see the missing Nut, its actually very similar to the same one holding the gas tank down.

Thanks for the tips, I'll check with twisted throttle too.
KTM sure doesn't know anything about it.
__________________
Google Earth GPS Howto (still a work in progress) use USGS TOPO Maps to layout trails.
http://home.windstream.net/catfish/GPS


The Early Bird gets the worm, but the second mouse gets the cheese.
https://sites.google.com/site/ozarkadventuretours/

Zecatfish is offline   Reply With Quote
Old 06-03-2010, 09:35 AM   #6
jeiff
Gnarly Adventurer
 
Joined: Jan 2007
Location: Top of the Hill
Oddometer: 239
Quote:
Originally Posted by Zecatfish
Here you can see the missing Nut, its actually very similar to the same one holding the gas tank down.

Thanks for the tips, I'll check with twisted throttle too.
KTM sure doesn't know anything about it.
That's definitely a SW-Motech sidestand. Twisted Throtle sells them. The nut is notorious for loosening. I used blue Loctite on mine, and check for tightness occasionally. No problems yet. I believe some have resorted to drilling and safety wire.
jeiff is offline   Reply With Quote
Old 06-03-2010, 09:36 AM   #7
Zecatfish OP
XTique Rider
 
Zecatfish's Avatar
 
Joined: Dec 2006
Location: Arkansas USA
Oddometer: 7,919
Quote:
Originally Posted by jeiff
Sounds like a SW-Motech sidestand. Check with twistedthrottle.com for parts.
Just talked to twistedthrottle and thats what it is. Seems SW-Mototech makes OEM parts for KTM too.
Heres the link for future reference
http://www.twistedthrottle.com/trade/productview/329
Theres a pdf at the bottom of the page that lists all the misc pieces.
So anyone else that has this issue it can be found again.
__________________
Google Earth GPS Howto (still a work in progress) use USGS TOPO Maps to layout trails.
http://home.windstream.net/catfish/GPS


The Early Bird gets the worm, but the second mouse gets the cheese.
https://sites.google.com/site/ozarkadventuretours/

Zecatfish is offline   Reply With Quote
Old 06-03-2010, 09:51 AM   #8
Truckin_Thumper
low profile
 
Truckin_Thumper's Avatar
 
Joined: Jun 2007
Location: Houston,TX
Oddometer: 28,399
Quote:
Originally Posted by wrk2surf
maybe you have an aftermarket side stand....
SW Motech I would assume. Only one I know of.

EDIT:
I see i was 205'd

Here is a pic of LuCy4's combo
__________________
Hawk and some stoopit chicken are idiots
Truckin_Thumper is offline   Reply With Quote
Old 06-03-2010, 11:10 AM   #9
Seikkailu_R
Studly Adventurer
 
Seikkailu_R's Avatar
 
Joined: Jun 2007
Location: Piikkiö, Finland
Oddometer: 825
Funny, 2000 Adv has factory weldet bracket for side stand, and both stands as stock...

Seikkailu_R is offline   Reply With Quote
Old 06-03-2010, 02:13 PM   #10
Crisis management
Latte riders FTW!
 
Crisis management's Avatar
 
Joined: Feb 2007
Location: New Zealand
Oddometer: 1,387
Quote:
Originally Posted by Zecatfish
Just talked to twistedthrottle and thats what it is.
Just watch fitting that nut, overtighten it and snap, no more bolt to screw the nut on.......DAMHIK

The other bolt (screws into the frame) comes loose as well so i fitted a longer bolt & put a nyloc nut on the inside of the frame to lock it, I had no luck with loctite!
__________________
Orange...cause it makes me look like I know what I'm doing!
Crisis management is offline   Reply With Quote
Old 07-06-2013, 04:11 PM   #11
scottcolbath
Beastly Adventurer
 
scottcolbath's Avatar
 
Joined: Oct 2004
Location: The north edge of 85050
Oddometer: 6,532
Time to revive this thread.

I broke both the bolt for the SW-Motech side stand, and the stud on my center stand.

Is there some easy fix for the center stand, such as drilling out the broken stud and using a nut/bolt?

S.C.
scottcolbath is offline   Reply With Quote
Old 07-06-2013, 10:25 PM   #12
bmwktmbill
Traveler
 
Joined: Jul 2005
Location: Traveler
Oddometer: 4,734
Quote:
Originally Posted by scottcolbath View Post
Time to revive this thread.

I broke both the bolt for the SW-Motech side stand, and the stud on my center stand.

Is there some easy fix for the center stand, such as drilling out the broken stud and using a nut/bolt?

S.C.

That's what I did,my kickstand also broke so it'swelded to the frame.

Ace hardware had a selection of nuts and bolts in Metric or American.

http://www.advrider.com/forums/showthread.php?t=888077


bill
__________________
'02 KTM 640 Adventure-lowered
"On the road there are no special cases."
Cormack McCarthy-The Crossing

The faster it goes the faster it breaks.
And high performance=high maintenance.
Bill Shockley
bmwktmbill is offline   Reply With Quote
Old 08-20-2013, 06:43 PM   #13
scottcolbath
Beastly Adventurer
 
scottcolbath's Avatar
 
Joined: Oct 2004
Location: The north edge of 85050
Oddometer: 6,532
Quote:
Originally Posted by bmwktmbill View Post
That's what I did,my kickstand also broke so it'swelded to the frame.

Ace hardware had a selection of nuts and bolts in Metric or American.

http://www.advrider.com/forums/showthread.php?t=888077


bill
Would you believe that I can't find a proper shouldered bolt to replace the broken shouldered/threaded pivot stud on the center stand? Nothing at Copper State Fasteners! Of all places, the nuts and bolts store has nothing. The local Ace has nothing. I'm going to check an Ace down in Phoenix next. The shoulder looks to be close to 10mm. How friggin' hard can it be to find a proper fit?

S.C.
scottcolbath is offline   Reply With Quote
Reply

Share

Thread Tools Search this Thread
Search this Thread:

.
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


Times are GMT -7.   It's 02:44 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ADVrider 2011-2014