Leaking trans input seal...not sure - Page 3

fishkens · 01-09-2011, 12:48 PM

Here's a vid of good ole 58430 in action...

http://www.youtube.com/watch?v=BtsGU2nLrJg

I recall once hearing something about using the right tool for the job.

The Raven · 01-09-2011, 01:53 PM

24hrs upside down with an oil filled trans....not a drop.

supershaft · 01-09-2011, 03:37 PM

Quote:

Originally Posted by fishkens

Here's a vid of good ole 58430 in action...

http://www.youtube.com/watch?v=BtsGU2nLrJg

I recall once hearing something about using the right tool for the job.

That looks handier than tits!

wirewrkr · 01-10-2011, 09:23 AM

i have a feeling Lisle stock is gonna go up real soon.

The Raven · 01-10-2011, 12:44 PM

Guess what? It leaks and will be replaced. The result of 48 hours inverted

Cordless · 01-10-2011, 01:29 PM

You buying der Ubertool or will you use the screw it method?

The Raven · 01-10-2011, 01:38 PM

Quote:

Originally Posted by Cordless

You buying der Ubertool or will you use the screw it method?

The ubertool is ubercheap.....will go that way!! I do not have access to your slidehammer as was how I removed the RMS

outfit · 01-10-2011, 03:13 PM

Look's like you got some sh$t in that gearbox/oil too.

The Raven · 01-10-2011, 03:36 PM

Quote:

Originally Posted by outfit

Look's like you got some sh$t in that gearbox/oil too.

Combo of moly, BMW red crap, rust and oil...

Wirespokes · 01-10-2011, 08:31 PM

Sometimes the input seal will leak because of garbage forced in there via splines. So make sure everything is spotless in the area, and only smear a very light film of lube on the splines when putting it back together.

01-09-2011, 12:48 PM	#31
fishkens Further... Joined: Nov 2009 Location: Seattle, WA Oddometer: 5,146	Here's a vid of good ole 58430 in action... http://www.youtube.com/watch?v=BtsGU2nLrJg I recall once hearing something about using the right tool for the job. __________________ Forging ahead, down a false trail.

01-10-2011, 09:23 AM	#34
wirewrkr the thread-killer Joined: May 2008 Location: HIGH desert Oddometer: 4,297	i have a feeling Lisle stock is gonna go up real soon. __________________ www.wirewerkes.com KILL YOUR TELEVISION !!!!

01-10-2011, 08:31 PM	#40
Wirespokes Beemerholics Anonymous Joined: Jul 2002 Location: Jackson's Bottom Oregon Oddometer: 7,354	Sometimes the input seal will leak because of garbage forced in there via splines. So make sure everything is spotless in the area, and only smear a very light film of lube on the splines when putting it back together. __________________ Wanted: Dead, smashed, crashed or trashed gauges BMW GAUGE REPAIRS - TACHSPEEDOCLOCKVOLT METER PODs & LIGHT BOARD*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-09-2011, 01:53 PM	#32
The Raven ^OP Banned Joined: Mar 2006 Location: Off the map, Oddometer: 4,813	24hrs upside down with an oil filled trans....not a drop.

01-10-2011, 12:44 PM	#35
The Raven ^OP Banned Joined: Mar 2006 Location: Off the map, Oddometer: 4,813	Guess what? It leaks and will be replaced. The result of 48 hours inverted

01-10-2011, 01:29 PM	#36
Cordless Two Wheel Addict Joined: Sep 2006 Location: ABQ, NM Oddometer: 1,960	You buying der Ubertool or will you use the screw it method?

01-10-2011, 03:13 PM	#38
outfit Studly Adventurer Joined: Jul 2008 Location: Orkney Isles Oddometer: 609	Look's like you got some sh$t in that gearbox/oil too.