Hotrodding the GS - Pre-Order Sale! - Page 42

slowoldguy · 12-04-2012, 04:50 PM

Jesus, fella. Edited.

Y'all are coming outta the woodwork. Time for me to stop reading the thread. Someone pm me when the new product is available. I am a buyer.

Wallowa · 12-04-2012, 06:56 PM

Quote:

Originally Posted by slowoldguy

Jesus, fella. Edited.

Y'all are coming outta the woodwork. Time for me to stop reading the thread. Someone pm me when the new product is available. I am a buyer.

I will try and remember to give you a PM when the next product becomes available for order...concur with your position on the screamers..

Would like to know answer to a question a few posts ago....Smooth before Cool? Was Cool eliminated? I also thought the Cool was to be released before the Smooth....

joenuclear · 12-04-2012, 08:53 PM

I'm looking forward to mine. Hang in there Poolside.

GS Dave · 12-05-2012, 01:17 PM

me too! I hope it comes gift wrapped

so I can put it under my tree

Poolside · 12-06-2012, 04:15 AM

Quote:

Originally Posted by MrPickle

Ship? Yet?

...(H)ow about this...don't sell them until you have resolved the myriad problems that this thread has become a rolling drama report of and MAKE THEM FIRST, THEN SELL THEM?

How many batches have you received payment on but not shipped? 4? 5? More? It's December for christs sake.

Not quite 3. Doing it this way is just as tried and true as other methods.

Yes, one or two people have mentioned drama. They've been very emphatic about it.

I get you're patience is being tested, Mr. Pickle, I'm doing what I can over here. It's the holiday season, and a sour mood isn't going to do anyone any good, you know? No offense meant, just trying for some levity.

Poolside · 12-06-2012, 04:17 AM

Hey there folks, here's what's going on. I'm working from home on Thursday and Friday. Which explains why I've been up late tonight at the bench. It looks like I can get this set into the epoxy to cure over the weekend.

Poolside · 12-06-2012, 04:22 AM

Quote:

Originally Posted by Leop54

Wish you've had an Happy Birthday, a relaxed day and a nice weekend, but now it's time to go back-at-the-bench: too much relax it is not whealty: it can weaken you...

The nuns used to say the same thing to me in school, Leo! Boy, if they could see me now!

Poolside · 12-11-2012, 05:26 AM

Hey how about this. The batch shown here passed muster and is going into epoxy today. That means they'll be ready to ship on Thursday. The last two batches are also moving along in the build process.

GS Dave · 12-11-2012, 06:05 AM

gift wrapped?

joenuclear · 12-11-2012, 07:53 AM

Quote:

Originally Posted by Poolside

Hey how about this. The batch shown here passed muster and is going into epoxy today. That means they'll be ready to ship on Thursday. The last two batches are also moving along in the build process.

Good news for that batch! It's looking like the next batch [mine] has a chance for Christmas.

Hope springs eternal.

super8mm · 12-11-2012, 02:24 PM

Quote:

Originally Posted by Poolside

.

Looks Great Poolside but would you please put that razor blade someplace safe, dont want you to get any ideas

Wallowa · 12-11-2012, 03:18 PM

Quote:

Originally Posted by super8mm

Looks Great Poolside but would you please put that razor blade someplace safe, dont want you to get any ideas

Never! That is for cutting lines....wire lines of course.

Yup I saw the coffee and razor blade and thought some of those IICEs could have 7 or 8 settings...

CanoeMoon · 12-11-2012, 05:52 PM

Excellent,.. GS fever seems to have sprung through a minor section of the ranks. I've been following this thread since page one, and ordered along the way. Considering this is a research and development project (that's for marketing) it doesn't matter about the time Poolside has taken to make all these little babies (by hand... not robot factory). After the build batch i have to wait for the cross-Pacific currents to float mine to Australia...in a bottle... then a Kangaroo will pick it up off the beach... then i'll get it (Skippy works for Aust post now). Patience... a little artisan "motronic-muh-bitch" component will get here soon enough. Cheers, enjoy those of you who are already equipped. And thanks for even thinking about it Poolside.

Poolside · 12-13-2012, 07:27 AM

Quote:

Originally Posted by super8mm

Looks Great Poolside but would you please put that razor blade someplace safe, don't want you to get any ideas

Heh heh. No way, and give up all this? Here's what it looked like a few minutes earlier from the picture you commented on.

Poolside · 12-13-2012, 07:32 AM

Quote:

Originally Posted by joenuclear

Good news for that batch! It's looking like the next batch [mine] has a chance for Christmas.

Hope springs eternal.

The last epoxy step for this batch is just about cured. Sometime this afternoon. A final test and they're ready to ship.

12-04-2012, 04:50 PM	#616
slowoldguy Tire Tester Joined: Jun 2004 Location: West of Waco, Texas Oddometer: 6,204	Jesus, fella. Edited. Y'all are coming outta the woodwork. Time for me to stop reading the thread. Someone pm me when the new product is available. I am a buyer. __________________ Roll The Bones IV- What's coming next? http://www.rollthebonesrally.com/ "If you can't fix it with a hammer you can damn sure teach it a lesson". slowoldguy screwed with this post 12-04-2012 at 05:48 PM

12-04-2012, 08:53 PM	#618
joenuclear Planning..... Joined: Mar 2007 Oddometer: 5,240	I'm looking forward to mine. Hang in there Poolside. __________________ Ride safe enough....

12-05-2012, 01:17 PM	#619
GS Dave Chicken Farmer Joined: Feb 2006 Location: in the land of entrapment Oddometer: 2,358	me too! I hope it comes gift wrapped so I can put it under my tree __________________ Unobtainable Certainty of death. Small chance of success. What are we waiting for? Gimli Lord of the Rings

12-06-2012, 04:17 AM	#621
Poolside ^OP Syndicated Joined: Apr 2003 Location: Long Beach, CA Oddometer: 11,286	Hey there folks, here's what's going on. I'm working from home on Thursday and Friday. Which explains why I've been up late tonight at the bench. It looks like I can get this set into the epoxy to cure over the weekend. __________________ IICE Air Hotrod your GS Fuel Injection Tech Info Buy Order List

12-11-2012, 05:26 AM	#623
Poolside ^OP Syndicated Joined: Apr 2003 Location: Long Beach, CA Oddometer: 11,286	Hey how about this. The batch shown here passed muster and is going into epoxy today. That means they'll be ready to ship on Thursday. The last two batches are also moving along in the build process. __________________ IICE Air Hotrod your GS Fuel Injection Tech Info Buy Order List Poolside screwed with this post 12-11-2012 at 05:39 AM Reason: Ooops, forgot the picture.

12-11-2012, 06:05 AM	#624
GS Dave Chicken Farmer Joined: Feb 2006 Location: in the land of entrapment Oddometer: 2,358	gift wrapped? __________________ Unobtainable Certainty of death. Small chance of success. What are we waiting for? Gimli Lord of the Rings

12-11-2012, 05:52 PM	#628
CanoeMoon CanoeMoon Joined: Apr 2010 Location: Central Vic Oddometer: 12	Long time? so what? Excellent,.. GS fever seems to have sprung through a minor section of the ranks. I've been following this thread since page one, and ordered along the way. Considering this is a research and development project (that's for marketing) it doesn't matter about the time Poolside has taken to make all these little babies (by hand... not robot factory). After the build batch i have to wait for the cross-Pacific currents to float mine to Australia...in a bottle... then a Kangaroo will pick it up off the beach... then i'll get it (Skippy works for Aust post now). Patience... a little artisan "motronic-muh-bitch" component will get here soon enough. Cheers, enjoy those of you who are already equipped. And thanks for even thinking about it Poolside.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode