Dual Sport Luggage Racks - Page 8

jackpiner57 · 01-08-2012, 07:47 PM

Quote:

Originally Posted by BugsyGS

Tom - I've got a shipping address in Minnesota I use for US stuff. I can have the rack shipped there. Just PM me with payment details if you could. Thanks my friend!

I sent you a PM.

Jonathan Multhaup · 01-12-2012, 06:29 PM

I had to make a minor modification since I have the Wolfman side racks on my DRZ. No big deal, but I had to violate Tom's good work just a bit to make it fit the way I wanted it to. Sure looks good installed! Very nice rack Tom.

jackpiner57 · 01-27-2012, 04:55 PM

Quote:

Originally Posted by Jonathan Multhaup

I had to make a minor modification since I have the Wolfman side racks on my DRZ. No big deal, but I had to violate Tom's good work just a bit to make it fit the way I wanted it to. Sure looks good installed! Very nice rack Tom.

Thanks so much Jonathan for posting up a pic! The bike looks awesome! I hope you enjoy the rack and get many years of use out of it.

jackpiner57 · 01-29-2012, 10:48 AM

I just got some racks back from the powdercoater and have 9 of these left. They all have the RotopaX option and bungee loops.

It's 14" X 14" and will hold a RotopaX fuel pack and a large tailbag, drybag, etc.

The TAT Rack by jackpiner57
-----------------------------

Here are the features:

* Guaranteed to fit your DR-Z400S or SM

* Easy bolt on installation

* Guaranteed against breakage

* Large 14" X 14" platform

* Weighs only 4.3 lbs

* Steel Tube Construction

* Satin Black Powder Coat Finish

* Sits flush with top of seat so the rack won't hit you in the lower back if you slide off the back

* Makes a good handle for pulling the bike out of the mud.

* All hardware is included.

* RotopaX mounting plate option is available for attaching a fuel cell to the rack. Nuts are welded to the backside of the plate for easy installation and removal of mount without having to remove the rack.

Price is $114.00 + 14.00 shipping to anywhere in the US

Canuman · 02-03-2012, 12:02 PM

If you are interested in making any up to fit the DRZ400E, I will have a bike within a few weeks. I am about 45 minutes north, if you need a test mule. I'd be perfectly willing to let you use the bike as test bed and pay your very reasonable fee.

I also have an '07 KLR650 that would look very nice with one of those. . .

jackpiner57 · 02-03-2012, 12:36 PM

Quote:

Originally Posted by Canuman

If you are interested in making any up to fit the DRZ400E, I will have a bike within a few weeks. I am about 45 minutes north, if you need a test mule. I'd be perfectly willing to let you use the bike as test bed and pay your very reasonable fee.

I also have an '07 KLR650 that would look very nice with one of those. . .

Canuman,

That sounds great! If both of your bikes are in stock configuration in the rear, then I can make the racks for you for FREE.

If your bikes are not stock in the rear, I can still make you some racks. I'll send you a PM Later with my phone numbers so we can talk.

Thanks, Tom

Roll-sen · 02-04-2012, 05:22 PM

The manufacture of a rack for the E model would be a huge deal. I'm sure there would be a ton of E owners (myself included) that would be interested.

Good to hear this is happening and please keep us all updated!

jackpiner57 · 02-04-2012, 06:32 PM

Quote:

Originally Posted by Roll-sen

The manufacture of a rack for the E model would be a huge deal. I'm sure there would be a ton of E owners (myself included) that would be interested.

Good to hear this is happening and please keep us all updated!

Thanks for the interest Roll-sen, stay tuned for an "E" model rack in the near future. - Tom

Weebil56 · 02-05-2012, 02:55 PM

Hey Tom, Any Reason Why I couldn't drop off My DR-650 for you to start on the Mock-Up & Jig next saturday??
Seems as though you are getting a few inquiries And It is All Farkled up to the point of adding the new rack...

jackpiner57 · 02-16-2012, 09:49 PM

Quote:

Originally Posted by Weebil56

Hey Tom, Any Reason Why I couldn't drop off My DR-650 for you to start on the Mock-Up & Jig next saturday??
Seems as though you are getting a few inquiries And It is All Farkled up to the point of adding the new rack...

Weebil56's bike is currently in the shop for R&D purposes. I'll post up pics of what we come up with.

jackpiner57 · 02-16-2012, 09:50 PM

DR-Z400S Luggage Rack with RotopaX Option

Just an update to say I have 6 of these left. They all have the RotopaX option, bungee loops and are Powder Coated.

It's 14" X 14" and will hold a RotopaX fuel pack and a large tailbag, drybag, etc.

The TAT Rack by jackpiner57
-----------------------------

Here are the features:

* Guaranteed to fit your DR-Z400S

* Easy bolt on installation with no drilling required

* Guaranteed against breakage

* Large 14" X 14" platform

* Weighs only 4.3 lbs

* Steel Tube Construction

* Satin Black Powder Coat Finish

* Sits flush with top of seat so the rack won't hit you in the lower back if you slide off the back

* Makes a good handle for pulling the bike out of the mud.

* All hardware is included.

* RotopaX mounting plate option is available for attaching a fuel cell to the rack. Nuts are welded to the backside of the plate for easy installation and removal of mount without having to remove the rack.

Price is $114.00 + 14.00 shipping to anywhere in the US

Picture shown with RotopaX Option and Bungee Loops

RockemRdr · 02-17-2012, 04:37 AM

Just a plug to say this is a great deal for a great rack. It is well designed, well made, and it has just the right features. I'm loving mine...

Canuman · 02-19-2012, 08:15 AM

Tom,

I have both the DRZE and the KLR650 ready to trailer down your way -- please tell me when you'd like 'em, and in which order.

Tim

jackpiner57 · 02-19-2012, 09:30 AM

Quote:

Originally Posted by RockemRdr

Just a plug to say this is a great deal for a great rack. It is well designed, well made, and it has just the right features. I'm loving mine...

Thanks Rockem! I appreciate the support. Have a great dualsport riding season this year! - Tom

jackpiner57 · 02-19-2012, 09:35 AM

Quote:

Originally Posted by Canuman

Tom,

I have both the DRZE and the KLR650 ready to trailer down your way -- please tell me when you'd like 'em, and in which order.

Tim

Tim, I have two railing/gate projects I'm doing right now, and I should be done with those in about two weeks. Then I have a DR650 to make a rack and side racks for. As soon as I'm done with those, I can do yours. Will that work OK for you? - Tom

01-12-2012, 06:29 PM	#107
Jonathan Multhaup Adventurer Joined: Dec 2004 Location: burbs, where the streets have no dirt for my knobs Oddometer: 85	Finally got my kewl Jackpiner rack installed! I had to make a minor modification since I have the Wolfman side racks on my DRZ. No big deal, but I had to violate Tom's good work just a bit to make it fit the way I wanted it to. Sure looks good installed! Very nice rack Tom. __________________ "The stone age didn't end because they ran out of stones. It ended because they found something better." Ahmed Yamani

01-29-2012, 10:48 AM	#109
jackpiner57 ^OP Meanderthal Joined: Aug 2005 Location: Northeastern Vermont Oddometer: 1,393	I just got some racks back from the powdercoater and have 9 of these left. They all have the RotopaX option and bungee loops. It's 14" X 14" and will hold a RotopaX fuel pack and a large tailbag, drybag, etc. The TAT Rack by jackpiner57 ----------------------------- Here are the features: * Guaranteed to fit your DR-Z400S or SM * Easy bolt on installation * Guaranteed against breakage * Large 14" X 14" platform * Weighs only 4.3 lbs * Steel Tube Construction * Satin Black Powder Coat Finish * Sits flush with top of seat so the rack won't hit you in the lower back if you slide off the back * Makes a good handle for pulling the bike out of the mud. * All hardware is included. * RotopaX mounting plate option is available for attaching a fuel cell to the rack. Nuts are welded to the backside of the plate for easy installation and removal of mount without having to remove the rack. Price is $114.00 + 14.00 shipping to anywhere in the US __________________ Tom - '07 DR-Z400S, '05 DL650 Dual Sport Luggage Racks: DRZ400, DR650, KLR650: http://www.moto-racks.com "I sort of realize there's a fundamental truth to our nature. Man must explore." -CMDR. David R. Scott

02-03-2012, 12:02 PM	#110
Canuman Cheese, Gromit? Joined: Jun 2008 Location: The Palace of the People, VT Oddometer: 3,299	If you are interested in making any up to fit the DRZ400E, I will have a bike within a few weeks. I am about 45 minutes north, if you need a test mule. I'd be perfectly willing to let you use the bike as test bed and pay your very reasonable fee. I also have an '07 KLR650 that would look very nice with one of those. . . __________________ We have no resources. We produce nothing. But...we have plenty of MEAN. Fearless Leader Motorcycle Racks Handmade in the US! Support a fellow Rider! Dual Sport Luggage Racks for: DRZ-S, SM and E, DR 650 and KLR650: http://www.moto-racks.com

02-05-2012, 02:55 PM	#114
Weebil56 V-Strom Flogger Joined: Nov 2007 Location: The Banana Belt of Vermont Oddometer: 13	DR-650 Rack ??? Hey Tom, Any Reason Why I couldn't drop off My DR-650 for you to start on the Mock-Up & Jig next saturday?? Seems as though you are getting a few inquiries And It is All Farkled up to the point of adding the new rack... __________________ There areTWO types of Motorcyclist: those who have dropped their Motorcycle & those who lie about not dropping their Motorcycle

02-16-2012, 09:50 PM	#116
jackpiner57 ^OP Meanderthal Joined: Aug 2005 Location: Northeastern Vermont Oddometer: 1,393	DR-Z400S Luggage Rack with RotopaX Option Just an update to say I have 6 of these left. They all have the RotopaX option, bungee loops and are Powder Coated. It's 14" X 14" and will hold a RotopaX fuel pack and a large tailbag, drybag, etc. The TAT Rack by jackpiner57 ----------------------------- Here are the features: * Guaranteed to fit your DR-Z400S * Easy bolt on installation with no drilling required * Guaranteed against breakage * Large 14" X 14" platform * Weighs only 4.3 lbs * Steel Tube Construction * Satin Black Powder Coat Finish * Sits flush with top of seat so the rack won't hit you in the lower back if you slide off the back * Makes a good handle for pulling the bike out of the mud. * All hardware is included. * RotopaX mounting plate option is available for attaching a fuel cell to the rack. Nuts are welded to the backside of the plate for easy installation and removal of mount without having to remove the rack. Price is $114.00 + 14.00 shipping to anywhere in the US Picture shown with RotopaX Option and Bungee Loops __________________ Tom - '07 DR-Z400S, '05 DL650 Dual Sport Luggage Racks: DRZ400, DR650, KLR650: http://www.moto-racks.com "I sort of realize there's a fundamental truth to our nature. Man must explore." -CMDR. David R. Scott jackpiner57 screwed with this post 02-16-2012 at 10:02 PM

02-04-2012, 05:22 PM	#112
Roll-sen Eh...whatever. Joined: Feb 2009 Location: Salt Lake City area Oddometer: 103	The manufacture of a rack for the E model would be a huge deal. I'm sure there would be a ton of E owners (myself included) that would be interested. Good to hear this is happening and please keep us all updated!

02-17-2012, 04:37 AM	#117
RockemRdr Gnarly Adventurer Joined: Jun 2006 Location: Out West Oddometer: 420	Just a plug to say this is a great deal for a great rack. It is well designed, well made, and it has just the right features. I'm loving mine...

02-19-2012, 08:15 AM	#118
Canuman Cheese, Gromit? Joined: Jun 2008 Location: The Palace of the People, VT Oddometer: 3,299	Tom, I have both the DRZE and the KLR650 ready to trailer down your way -- please tell me when you'd like 'em, and in which order. Tim __________________ We have no resources. We produce nothing. But...we have plenty of MEAN. Fearless Leader Motorcycle Racks Handmade in the US! Support a fellow Rider! Dual Sport Luggage Racks for: DRZ-S, SM and E, DR 650 and KLR650: http://www.moto-racks.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode