R75/7- driveshaft bolt stripped!! why? - Page 2

disston · 09-07-2011, 02:34 PM

I believe it's that much. When I took one off to remove shaft it was that tight. The bell was really tight and we had some trouble with getting the bell off, using a press. The guy that was helping me said to not put it back that tight. 150 should be plenty.

I would not use red locktight here. You may not be the one to some day take it apart. Clean and dry.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: .
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-07-2011, 02:34 PM	#16
disston ShadeTreeExpert Joined: Mar 2011 Location: Silver Spring, Md Oddometer: 5,013	I believe it's that much. When I took one off to remove shaft it was that tight. The bell was really tight and we had some trouble with getting the bell off, using a press. The guy that was helping me said to not put it back that tight. 150 should be plenty. I would not use red locktight here. You may not be the one to some day take it apart. Clean and dry.